Download or read book Process Industries 2 written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2020-10-29 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of knowledge exchange between the academic and industrial worlds, this book analyzes the process industries impacted by the digital revolution that accompanies the ongoing energy and environmental transitions. Process Industries 2 first discusses bio-industries and analyzes the development of products of microbial origin. It then studies all the stages of industrialization that facilitate the progress from research to the production of a finished product, as well as industrial management techniques. Using concrete examples, this book presents the instruments of the digital revolution (artificial intelligence, virtual reality, augmented reality, the Internet of Things, digital twins), while analyzing their impact on the supply chain and operators. Boxes within the book, written by recognized specialists, invite both students and professionals, who are faced with a changing world, to reflect on the industry and the world of tomorrow.
Download or read book Mixing in the Process Industries written by A W NIENOW and published by Butterworth-Heinemann. This book was released on 1997-09-11 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.
Download or read book Lean for the Process Industries written by Peter L. King and published by Productivity Press. This book was released on 2019 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on 40 years of application experience at one of the world's largest chemical and materials manufacturers, King provides the first comprehensive resource written explicitly for change agents within the process industries.
Download or read book Process Industries 2 written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2020-10-09 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of knowledge exchange between the academic and industrial worlds, this book analyzes the process industries impacted by the digital revolution that accompanies the ongoing energy and environmental transitions. Process Industries 2 first discusses bio-industries and analyzes the development of products of microbial origin. It then studies all the stages of industrialization that facilitate the progress from research to the production of a finished product, as well as industrial management techniques. Using concrete examples, this book presents the instruments of the digital revolution (artificial intelligence, virtual reality, augmented reality, the Internet of Things, digital twins), while analyzing their impact on the supply chain and operators. Boxes within the book, written by recognized specialists, invite both students and professionals, who are faced with a changing world, to reflect on the industry and the world of tomorrow.
Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.
Download or read book Domino Effects in the Process Industries written by Genserik Reniers and published by Newnes. This book was released on 2013-07-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Domino Effects in the Process Industries discusses state-of-the-art theories, conceptual models, insights and practical issues surrounding large-scale knock-on accidents—so-called domino effects—in the chemical and process industries. The book treats such extremely low-frequency phenomena from a technological perspective, studying possible causes and introducing several approaches to assess and control the risks of these scenarios. The authors also examine these events from a managerial viewpoint, discussing single and multi-plant management insights and requirements to take pro-active measures to prevent such events. Academics, regulators, and industrialists who study and analyze domino effects in order to prevent such events will find the book unique and highly valuable. - Outlines available methods in analyzing these events, aiding understanding of the accidents and their causes - Covers current modelling, control and management tactics of domino effects, -facilitating prevention - Identifies areas where new research is needed
Download or read book Process Industries 2 written by Jean-Pierre Dal Pont and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Human Factors in the Chemical and Process Industries written by Janette Edmonds and published by Elsevier. This book was released on 2016-09-17 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Factors in the Chemical and Process Industries: Making it Work in Practice is a comprehensive overview of human factors within this sector, focusing on the practical application. It has been written by acknowledged industry experts from the Keil Centre, which is a leading practice of chartered ergonomics and human factors specialists, chartered safety specialists, registered occupational psychologists, and registered clinical psychologists The book was inspired by the international human factors training course run by the Keil Centre with the IChemE(http://www.icheme.org/human-factors), which has reached four continents across the world. The book is written for those who want a comprehensive overview of the subject, focusing on the practical application of human factors. It has been written for safety professionals, engineers and operational disciplines within industry, and those aspiring to these disciplines, who either deal with human factors issues or any aspect of the 'human element' in their core role. The book explains what 'human factors' is about and how human factors issues are best managed from a practical perspective. It will help readers develop a greater understanding of the area and how to establish more effective solutions for human factors related issues. - Provides comprehensive coverage of the most relevant human factors within this sector, with succinct overviews of each topic - Uses case studies and practical examples to illustrate topics and explains the material in a fully accessible, easy to understand style - Written by a single team of eleven industry practitioners, drawing on the combined expertise of different human factors specialisms which are rarely comprehensively combined in a single resource
Download or read book Ergonomic Solutions for the Process Industries written by Dennis A. Attwood and published by Elsevier. This book was released on 2004-01-24 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Work-related injuries, such as back injuries and carpal tunnel syndrome, are the most prevalent, most EXPENSIVE, and most preventable workplace injuries, accounting for more than 647,000 lost days of work annually (according to OSHA estimates). Such injuries, and many others, can be prevented in your facility by establishing an ergonomic design. This book shows you how to apply simple Ergonomic tools and procedures in your plant.Challenging worldwide regulations are forcing some companies to spend thousands of dollars per affected employee in order to comply. This book shows you how to comply with these regulations at a fraction of the cost, in the most timely, efficient method possible.*Learn how to use the Human Factors/Ergonomics tools in process industries*Identify and prioritize Ergonomic issues, develop interventions, and measure their effects*Apply Ergonomics to the design of new facilities
Download or read book Lee s Loss Prevention in the Process Industries written by Sam Mannan and published by Elsevier Butterworth Heinemann. This book was released on 2012 with total page 3642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lees' is industry's first stop for process safety information. Lees' 4e is the comprehensive and scaleable source of professional industrial process safety and loss prevention information. Available in print and electronic formats, and online with additional new tools and an annual update schedule, Lees' provides users with the information they require to ensure process safety. Volume 1 covers legislation, engineering and design: Key topics include law; major hazard control; economics and insurance; reliability engineering; hazard identification; hazard assessment; process design; pressure system design; control system design; emission and dispersion; and fire. Volume 2 covers operation and practical safety: Key topics include explosion, toxic release, plant operation, storage, transport, emergency planning, personal safety, accident research, reactive chemicals, safety instrumented systems, and chemical security. Volume 3 contains the case histories and data, including ACMH model license conditions; HSE guidelines' public planning inquiries; standards and codes; process safety management (PSM) regulations in the United States; risk management program regulations * THE process safety encyclopedia, trusted worldwide for over 30 years * Now available in print and online, to aid searchability and portability * Over 3600 print pages cover the full scope of process safety and loss prevention, compiling theory, practice, standards, legislation, case studies and lessons learned, in one resource as opposed to multiple sources.
Download or read book Energy and Process Optimization for the Process Industries written by Frank (Xin X.) Zhu and published by John Wiley & Sons. This book was released on 2013-11-25 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exploring methods and techniques to optimize processing energy efficiency in process plants, Energy and Process Optimization for the Process Industries provides a holistic approach that considers optimizing process conditions, changing process flowschemes, modifying equipment internals, and upgrading process technology that has already been used in a process plant with success. Field tested by numerous operating plants, the book describes technical solutions to reduce energy consumption leading to significant returns on capital and includes an 8-point Guidelines for Success. The book provides managers, chemical and mechanical engineers, and plant operators with methods and tools for continuous energy and process improvements.
Download or read book Waste Heat Recovery in Process Industries written by Hussam Jouhara and published by John Wiley & Sons. This book was released on 2022-05-31 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore modern waste heat recovery technology across a variety of industries In Waste Heat Recovery in Process Industries, esteemed thermal engineer Hussam Jouhara delivers an organized and comprehensive exploration of waste heat recovery systems with a focus on industrial applications in different temperature ranges. The author describes various waste heat recovery systems, like heat exchangers, waste heat boilers, air preheaters, direct electrical conversion devices, and thermal storage. The book also offers discussions of the technologies and applications relevant to different temperature ranges present in industrial settings along with revealing case studies from various industries. Waste Heat Recovery in Process Industries examines a variety of industries, from steel to ceramics, chemicals, and food, and how plants operating in these sectors can use waste heat to improve their energy efficiency, reduce energy costs, and minimize their carbon footprint. The book also offers: A thorough introduction to waste heat recovery systems, including recuperative and regenerative burners, heat exchangers, waste heat boilers, air preheaters, and heat pumps Comprehensive explorations of low temperature applications, below 100°C, including advantages and drawbacks, as well as illustrative case studies Practical discussions of medium temperature applications, between 100°C and 400°C, including case studies In-depth examination of high temperature applications, above 400°C, including several case studies Perfect for chemical, mechanical, process, and power engineers, Waste Heat Recovery in Process Industries is also an ideal resource for professionals working in the chemical, metal processing, pharmaceutical, and food industries.
Download or read book Chemical Process Ind Org Chem V2 written by W. SMITH and published by . This book was released on 2016-03-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dust Explosions in the Process Industries written by Rolf K. Eckhoff and published by Elsevier. This book was released on 2003-07-18 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfortunately, dust explosions are common and costly in a wide array of industries such as petrochemical, food, paper and pharmaceutical. It is imperative that practical and theoretical knowledge of the origin, development, prevention and mitigation of dust explosions is imparted to the responsible safety manager. The material in this book offers an up to date evaluation of prevalent activities, testing methods, design measures and safe operating techniques. Also provided is a detailed and comprehensive critique of all the significant phases relating to the hazard and control of a dust explosion. An invaluable reference work for industry, safety consultants and students. - A completely new chapter on design of electrical equipment to be used in areas containing combustible/explosible dust - A substantially extended and re-organized final review chapter, containing nearly 400 new literature references from the years 1997-2002 - Extensive cross-referencing from the original chapters 1-7 to the corresponding sections of the expanded review chapter
Download or read book Chemical Process Industries written by Randolph Norris Shreve and published by . This book was released on 1967 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste Minimization and Cost Reduction for the Process Industries written by Paul N. Cheremisinoff and published by Elsevier. This book was released on 1995-12-31 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide a base of information and analysis to assist in implementation of the policy of reducing and/or minimizing hazardous waste generation in manufacturing and more specifically in the process industries. What is the significance of reducing the generation of all process wastes? This book examines the technical nature of waste reduction and the extent to which waste reduction can likely be implemented. Also explored is the extent to which technology itself, as well as information and resources, is a barrier to waste reduction. In what ways are waste reduction decisions dependent on specific circumstances? Can the amount of feasible waste reduction be estimated? Auditing of manufacturing and unit operations and processes are particularly significant and useful in the chemical process industries (food, pharmaceuticals, chemicals, fertilizer, petrochemicals, etc.) since it is estimated that these industries account for more than half of the hazardous wastes generated. This book presents a compilation of complete information on potential sources of waste loss or generation through technical inspection. Also presented are calculation methods for determining air-waste-solid wastes material balances, informational requirements and waste reduction analysis.The reader should find the book useful in the areas of auditing and waste minimization. It is replete with useful information as well as specific case histories, which should make it a practical tool for the user.
Download or read book Designing Controls for the Process Industries written by Wayne Seames and published by CRC Press. This book was released on 2017-09-05 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a modern, process-oriented approach emphasizing process control scheme development instead of extended coverage of LaPlace space descriptions of process dynamics, this text focuses on aspects that are most important for process engineering in the 21st century. Instead of starting with the controller, the book starts with the process and moves on to how basic regulatory control schemes can be designed to achieve the process’ objectives while maintaining stable operations. In addition to continuous control concepts, process and control system dynamics are embedded into the text with each new concept presented. The book also includes sections on batch and semi-batch processes and safety automation within each concept area. It discusses the four most common process control loops—feedback, feedforward, ratio, and cascade—and discusses application of these techniques for process control schemes for the most common types of unit operations. It also discusses more advanced and less commonly used regulatory control options such as override, allocation, and split range controllers, includes an introduction to higher level automation functions, and provides guidance for ways to increase the overall safety, stability, and efficiency for many process applications. It introduces the theory behind the most common types of controllers used in the process industries and also provides various additional plant automation-related subjects.
