Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
Download or read book Process Heat Transfer written by R. W. Serth and published by Academic Press. This book was released on 2007 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robert Serth investigates the design and implementation of industrial heat exchangers. He provides the background needed to understand and master the commercial software packages used by professional engineers for design and analysis of heat exchangers.
Download or read book Process Heat Transfer written by R. W. Serth and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kern s Process Heat Transfer written by Ann Marie Flynn and published by John Wiley & Sons. This book was released on 2019-05-16 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book insures the legacy of the original 1950 classic, Process Heat Transfer, by Donald Q. Kern. This second edition book is divided into three parts: Fundamental Principles; Heat Exchangers; and Other Heat Transfer Equipment/ Considerations. - Part I provides a series of chapters concerned with introductory topics that are required when solving heat transfer problems. This part of the book deals with topics such as steady-state heat conduction, unsteady-state conduction, forced convection, free convection, and radiation. - Part II is considered by the authors to be the “meat” of the book – addressing heat transfer equipment design procedures and applications. In addition to providing a more meaningful treatment of the various types of heat exchangers, this part also examines the impact of entropy calculations on exchanger design. - Part III of the book examines other related topics of interest, including boiling and condensation, refrigeration and cryogenics, boilers, cooling towers and quenchers, batch and unsteady-state processes, health & safety and the accompanying topic of risk. An Appendix is also included. What is new in the 2nd edition Changes that are addressed in the 2nd edition so that Kern’s original work continues to remain relevant in 21st century process engineering include: - Updated Heat Exchanger Design - Increased Number of Illustrative Examples - Energy Conservation/ Entropy Considerations - Environmental Considerations - Health & Safety - Risk Assessment - Refrigeration and Cryogenics - Inclusion of SI Units
Download or read book Heat Transfer in Process Engineering written by Eduardo Cao and published by McGraw Hill Professional. This book was released on 2009-08-12 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge heat transfer principles and design applications Apply advanced heat transfer concepts to your chemical, petrochemical, and refining equipment designs using the detailed information contained in this comprehensive volume. Filled with valuable graphs, tables, and charts, Heat Transfer in Process Engineering covers the latest analytical and empirical methods for use with current industry software. Select heat transfer equipment, make better use of design software, calculate heat transfer coefficients, troubleshoot your heat transfer process, and comply with design and construction standards. Heat Transfer in Process Engineering allows you to: Review heat transfer principles with a direct focus on process equipment design Design, rate, and specify shell and tube, plate, and hairpin heat exchangers Design, rate, and specify air coolers with plain or finned tubes Design, rate, and specify different types of condensers with tube or shellside condensation for pure fluids or multicomponent mixtures Understand the principles and correlations of boiling heat transfer, with their limits on and applications to different types of reboiler design Apply correlations for fired heater ratings, for radiant and convective zones, and calculate fuel efficiency Obtain a set of useful Excel worksheets for process heat transfer calculations
Download or read book Process Heat Transfer written by Sarit K. Das and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present text is aimed at giving the students a substantial feel of the fundamentals of heat transfer applied to process industry. Though the introduction of the material is made at the undergraduate level for a first course in Process Heat Transfer', it includes enough advanced material for postgraduate courses on Process Heat Transfer' or Heat Exchangers'. The text starts with summary of single phase heat transfer. Subsequently classification, selection and basic theory of heat transfer equipment are explained. Based on this, traditional heat exchangers as well as stirred tanks are treated in detail. Special emphasis has been laid on plate type heat exchangers. The second part introduces two-phase heat transfer followed by apparatus dealing with phase change such as condensers, evaporators, reboilers and cooling towers. Finally, recent advances in process optimization through pinch technology and energy analysis along with transient response of heat exchangers are introduced. The textbook stresses on design approach.
Download or read book Heat Transfer Principles and Applications written by Charles H. Forsberg and published by Academic Press. This book was released on 2020-03 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Principles and Applications is a welcome change from more encyclopedic volumes exploring heat transfer. This shorter text fully explains the fundamentals of heat transfer, including heat conduction, convection, radiation and heat exchangers. The fundamentals are then applied to a variety of engineering examples, including topics of special and current interest like solar collectors, cooling of electronic equipment, and energy conservation in buildings. The text covers both analytical and numerical solutions to heat transfer problems and makes considerable use of Excel and MATLAB(R) in the solutions. Each chapter has several example problems and a large, but not overwhelming, number of end-of-chapter problems.
Download or read book Numerical Methods with Chemical Engineering Applications written by Kevin D. Dorfman and published by Cambridge University Press. This book was released on 2017-01-11 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This undergraduate textbook integrates the teaching of numerical methods and programming with problems from core chemical engineering subjects.
Download or read book Process Heat Transfer written by Donald Quentin Kern and published by . This book was released on 1959 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Processing of Food Products by Steam and Hot Water written by Seid Mahdi Jafari and published by Woodhead Publishing. This book was released on 2022-11-10 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Processing of Food Products by Steam and Hot Water, a volume in the Unit Operations and Processing Equipment in the Food Industry series, explains the processing operations and equipment necessary for the thermal processing of different food products by applying steam and hot water. Sections cover an overview of thermal food processing, heat exchangers in the food processing industry, different thermal processing operations in the food industry, and applications of heat exchanges. All sections emphasize basic texts relating to experimental, theoretical, computational and/or the applications of food engineering principles and relevant processing equipment. Written by experts in the field of food engineering, in a simple and dynamic way, this book targets industrial engineers working in the field of food processing and within food factories to make them more familiar with the particular food processing operations and equipment. Thoroughly explores novel applications of thermal unit operations in the food industry Evaluates different alternatives for thermal processing operations Covers the application of heat exchangers in the food industry
Download or read book HEAT TRANSFER SECOND EDITION written by DUTTA, BINAY K. and published by PHI Learning Pvt. Ltd.. This book was released on 2023-07-01 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for courses in heat transfer for undergraduates, not only in chemical engineering and related disciplines of biochemical engineering, and chemical technology, but also in mechanical engineering and production engineering. The author provides the reader with a thorough account of the fundamental principles and their applications to engineering practice, including a survey of the recent developments in heat transfer equipment. A whole chapter has been devoted to explain the concept of the heat transfer coefficient to give a feel of its importance in tackling problems of convective heat transfer. The use of the important heat transfer correlations has been illustrated with carefully selected examples. In addition to an overview of the construction, operation and selection of equipment for heating, cooling, and phase change (boiling, condensation and evaporation), the revised second edition provides glimpses of the present trends and practice relating to heat transfer equipment in process industries and illustrative photographs of the state-of-the-art equipment. The design procedures of more common heat exchangers such as shell-and-tube, air-cooled, plate-and-frame, spiral plate, and spiral tube have been illustrated with realistic examples. Several new examples and problems have been included. Comparison with ASPEN simulation results has been given for a shell-and-tube exchanger. Cost calculation of a heat exchanger from the first principles is included. Recent topics such as heat transfer in microchannels and nano-fluids, and bio-heat transfer have been introduced. WHAT IS NEW TO THIS EDITION? • Thoroughly recast chapters providing glimpses of the recent developments in theory and application areas of the subject. • A new chapter (Chapter 12) on Microchannel, Nano-and Bio-heat Transfer added to introduce the readers to the newer areas of research and application. • Chapter 8 on Heat Exchangers has been thoroughly revised in consideration of the practical and direct use of the theoretical principles. • Topics such as the Bell Method of heat exchanger design, sizing of air-cooled heat exchangers, plate heat exchanger, spiral plate and spiral tube heat exchangers are some of the fresh additions • Results of a few ASPEN simulations are given in Appendix B. Cost estimation of a S&T heat exchanger from first principles is described in Appendix C. Target Audience • B.Tech. (chemical engineering and related disciplines of biochemical engineering and chemical technology). • Also for courses on heat transfer in mechanical and production engineering.
Download or read book Cooling Applications Processes Technologies and Practical Implementations written by Charles Nehme and published by Charles Nehme. This book was released on with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to "Cooling Applications: Processes, Technologies, and Practical Implementations." This book explores the fascinating world of process cooling, delving into its fundamental principles, diverse applications, and innovative technologies. As industries continue to evolve and demand increasingly sophisticated cooling solutions, understanding the intricacies of process cooling becomes paramount. In this preface, I want to express my gratitude for embarking on this journey with me. Whether you are a student, engineer, researcher, or industry professional, this book aims to provide valuable insights and practical knowledge to enhance your understanding of process cooling. The journey begins with an exploration of the importance of process cooling and its fundamental principles of heat transfer. From there, we dive into various industrial applications, ranging from manufacturing and food processing to pharmaceuticals and biotechnology. Each chapter delves into specific cooling technologies, from traditional refrigeration systems to cutting-edge techniques like cryogenic cooling and renewable energy integration. Throughout the book, you'll find a balance of theoretical concepts and real-world examples, illustrating how these principles are applied in practice. Case studies highlight successful implementations and lessons learned, while discussions on system design and optimization offer practical guidance for engineers and decision-makers. As we navigate through the chapters, we'll also peer into the future of process cooling, exploring emerging trends and innovations that promise to shape the industry in the years to come. From sustainable solutions to advancements in renewable energy integration, the possibilities are as exciting as they are limitless. I hope this book serves as a valuable resource, sparking curiosity, inspiring innovation, and fostering a deeper appreciation for the vital role of process cooling in our modern world. Thank you for joining me on this exploration of cooling applications, and may your journey be as enlightening as it is rewarding.
Download or read book Heat Transfer Applications in Process Engineering written by David Azbel and published by William Andrew. This book was released on 1984 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Thermal Engineering written by Raj P. Chhabra and published by CRC Press. This book was released on 2017-11-08 with total page 1649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CRC Handbook of Thermal Engineering, Second Edition, is a fully updated version of this respected reference work, with chapters written by leading experts. Its first part covers basic concepts, equations and principles of thermodynamics, heat transfer, and fluid dynamics. Following that is detailed coverage of major application areas, such as bioengineering, energy-efficient building systems, traditional and renewable energy sources, food processing, and aerospace heat transfer topics. The latest numerical and computational tools, microscale and nanoscale engineering, and new complex-structured materials are also presented. Designed for easy reference, this new edition is a must-have volume for engineers and researchers around the globe.
Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Butterworth-Heinemann. This book was released on 2013-10-25 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers with minichannel and microchannel flow passages are becoming increasingly popular due to their ability to remove large heat fluxes under single-phase and two-phase applications. Heat Transfer and Fluid Flow in Minichannels and Microchannels methodically covers gas, liquid, and electrokinetic flows, as well as flow boiling and condensation, in minichannel and microchannel applications. Examining biomedical applications as well, the book is an ideal reference for anyone involved in the design processes of microchannel flow passages in a heat exchanger. Each chapter is accompanied by a real-life case study New edition of the first book that solely deals with heat and fluid flow in minichannels and microchannels Presents findings that are directly useful to designers; researchers can use the information in developing new models or identifying research needs
Download or read book INTRODUCTION TO HEAT TRANSFER written by S. K. SOM and published by PHI Learning Pvt. Ltd.. This book was released on 2008-10-24 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive treatment of the essential fundamentals of the topics that should be taught as the first-level course in Heat Transfer to the students of engineering disciplines. The book is designed to stimulate student learning through clear, concise language. The theoretical content is well balanced with the problem-solving methodology necessary for developing an orderly approach to solving a variety of engineering problems. The book provides adequate mathematical rigour to help students achieve a sound understanding of the physical processes involved. Key Features : A well-balanced coverage between analytical treatments, physical concepts and practical demonstrations. Analytical descriptions of theories pertaining to different modes of heat transfer by the application of conservation equations to control volume and also by the application of conservation equations in differential form like continuity equation, Navier–Stokes equations and energy equation. A short description of convective heat transfer based on physical understanding and practical applications without going into mathematical analyses (Chapter 5). A comprehensive description of the principles of convective heat transfer based on mathematical foundation of fluid mechanics with generalized analytical treatments (Chapters 6, 7 and 8). A separate chapter describing the basic mechanisms and principles of mass transfer showing the development of mathematical formulations and finding the solution of simple mass transfer problems. A summary at the end of each chapter to highlight key terminologies and concepts and important formulae developed in that chapter. A number of worked-out examples throughout the text, review questions, and exercise problems (with answers) at the end of each chapter. This book is appropriate for a one-semester course in Heat Transfer for undergraduate engineering students pursuing careers in mechanical, metallurgical, aerospace and chemical disciplines.
Download or read book Fundamentals and Practical Aspects of Gas Injection written by Reza Azin and published by Springer Nature. This book was released on 2021-07-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers different aspects of gas injection, from the classic pressure maintenance operation to enhanced oil recovery (EOR), underground gas storage (UGS), and carbon capture and storage (CCS). The authors detail the unique characteristics and specific criteria of each application, including: material balance equations phase behaviour reservoir engineering well design operating aspects surface facilities environmental issues Examples, data, and simulation codes are provided to enable the reader to gain an in-depth understanding of these applications. Fundamentals and Practical Aspects of Gas Injection will be of use to practising engineers in the fields of reservoir engineering, and enhanced oil recovery. It will also be of interest to researchers, academics, and graduate students working in the field of petroleum engineering.
