Download or read book 3D Stacked Chips written by Ibrahim (Abe) M. Elfadel and published by Springer. This book was released on 2016-05-11 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains for readers how 3D chip stacks promise to increase the level of on-chip integration, and to design new heterogeneous semiconductor devices that combine chips of different integration technologies (incl. sensors) in a single package of the smallest possible size. The authors focus on heterogeneous 3D integration, addressing some of the most important challenges in this emerging technology, including contactless, optics-based, and carbon-nanotube-based 3D integration, as well as signal-integrity and thermal management issues in copper-based 3D integration. Coverage also includes the 3D heterogeneous integration of power sources, photonic devices, and non-volatile memories based on new materials systems.

Download or read book Process for 3D Chip Stacking written by and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A manufacturable process for fabricating electrical interconnects which extend from a top surface of an integrated circuit chip to a sidewall of the chip using laser pantography to pattern three dimensional interconnects. The electrical interconnects may be of an L-connect or L-shaped type. The process implements three dimensional (3D) stacking by moving the conventional bond or interface pads on a chip to the sidewall of the chip. Implementation of the process includes: 1) holding individual chips for batch processing, 2) depositing a dielectric passivation layer on the top and sidewalls of the chips, 3) opening vias in the dielectric, 4) forming the interconnects by laser pantography, and 5) removing the chips from the holding means. The process enables low cost manufacturing of chips with bond pads on the sidewalls, which enables stacking for increased performance, reduced space, and higher functional per unit volume.

Download or read book 3D IC Stacking Technology written by Banqiu Wu and published by McGraw Hill Professional. This book was released on 2011-10-14 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest advances in three-dimensional integrated circuit stacking technology With a focus on industrial applications, 3D IC Stacking Technology offers comprehensive coverage of design, test, and fabrication processing methods for three-dimensional device integration. Each chapter in this authoritative guide is written by industry experts and details a separate fabrication step. Future industry applications and cutting-edge design potential are also discussed. This is an essential resource for semiconductor engineers and portable device designers. 3D IC Stacking Technology covers: High density through silicon stacking (TSS) technology Practical design ecosystem for heterogeneous 3D IC products Design automation and TCAD tool solutions for through silicon via (TSV)-based 3D IC stack Process integration for TSV manufacturing High-aspect-ratio silicon etch for TSV Dielectric deposition for TSV Barrier and seed deposition Copper electrodeposition for TSV Chemical mechanical polishing for TSV applications Temporary and permanent bonding Assembly and test aspects of TSV technology

Download or read book Three Dimensional System Integration written by Antonis Papanikolaou and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional (3D) integrated circuit (IC) stacking is the next big step in electronic system integration. It enables packing more functionality, as well as integration of heterogeneous materials, devices, and signals, in the same space (volume). This results in consumer electronics (e.g., mobile, handheld devices) which can run more powerful applications, such as full-length movies and 3D games, with longer battery life. This technology is so promising that it is expected to be a mainstream technology a few years from now, less than 10-15 years from its original conception. To achieve this type of end product, changes in the entire manufacturing and design process of electronic systems are taking place. This book provides readers with an accessible tutorial on a broad range of topics essential to the non-expert in 3D System Integration. It is an invaluable resource for anybody in need of an overview of the 3D manufacturing and design chain.

Download or read book Handbook of 3D Integration Volume 1 written by Philip Garrou and published by John Wiley & Sons. This book was released on 2011-09-22 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first encompassing treatise of this new, but very important field puts the known physical limitations for classic 2D electronics into perspective with the requirements for further electronics developments and market necessities. This two-volume handbook presents 3D solutions to the feature density problem, addressing all important issues, such as wafer processing, die bonding, packaging technology, and thermal aspects. It begins with an introductory part, which defines necessary goals, existing issues and relates 3D integration to the semiconductor roadmap of the industry. Before going on to cover processing technology and 3D structure fabrication strategies in detail. This is followed by fields of application and a look at the future of 3D integration. The contributions come from key players in the field, from both academia and industry, including such companies as Lincoln Labs, Fraunhofer, RPI, ASET, IMEC, CEA-LETI, IBM, and Renesas.

Download or read book Die stacking Architecture written by Yuan Xie and published by Springer Nature. This book was released on 2022-05-31 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emerging three-dimensional (3D) chip architectures, with their intrinsic capability of reducing the wire length, promise attractive solutions to reduce the delay of interconnects in future microprocessors. 3D memory stacking enables much higher memory bandwidth for future chip-multiprocessor design, mitigating the "memory wall" problem. In addition, heterogenous integration enabled by 3D technology can also result in innovative designs for future microprocessors. This book first provides a brief introduction to this emerging technology, and then presents a variety of approaches to designing future 3D microprocessor systems, by leveraging the benefits of low latency, high bandwidth, and heterogeneous integration capability which are offered by 3D technology.

Download or read book Wireless Interface Technologies for 3D IC and Module Integration written by Tadahiro Kuroda and published by Cambridge University Press. This book was released on 2021-09-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesising fifteen years of research, this authoritative text provides a comprehensive treatment of two major technologies for wireless chip and module interface design, covering technology fundamentals, design considerations and tradeoffs, practical implementation considerations, and discussion of practical applications in neural network, reconfigurable processors, and stacked SRAM. It explains the design principles and applications of two near-field wireless interface technologies for 2.5-3D IC and module integration respectively, and describes system-level performance benefits, making this an essential resource for researchers, professional engineers and graduate students performing research in next-generation wireless chip and module interface design.

Download or read book Handbook of 3D Integration Volume 4 written by Paul D. Franzon and published by John Wiley & Sons. This book was released on 2019-01-25 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fourth volume of the landmark handbook focuses on the design, testing, and thermal management of 3D-integrated circuits, both from a technological and materials science perspective. Edited and authored by key contributors from top research institutions and high-tech companies, the first part of the book provides an overview of the latest developments in 3D chip design, including challenges and opportunities. The second part focuses on the test methods used to assess the quality and reliability of the 3D-integrated circuits, while the third and final part deals with thermal management and advanced cooling technologies and their integration.

Download or read book Handbook of 3D Integration Volumes 1 and 2 written by Philip Garrou and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first encompassing treatise of this new and very important field puts the known physical limitations for classic 2D microelectronics into perspective with the requirements for further microelectronics developments and market necessities. This two-volume handbook presents 3D solutions to the feature density problem, addressing all important issues, such as wafer processing, die bonding, packaging technology, and thermal aspects. It begins with an introductory part, which defines necessary goals, existing issues and relates 3D integration to the semiconductor roadmap of the industry. Before going on to cover processing technology and 3D structure fabrication strategies in detail. This is followed by fields of application and a look at the future of 3D integration. The editors have assembled contributions from key academic and industrial players in the field, including Intel, Micron, IBM, Infineon, Qimonda, NXP, Philips, Toshiba, Semitool, EVG, Tezzaron, Lincoln Labs, Fraunhofer, RPI, IMEC, CEA-LETI and many others.

Download or read book Wafer Level 3 D ICs Process Technology written by Chuan Seng Tan and published by Springer Science & Business Media. This book was released on 2009-06-29 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on foundry-based process technology that enables the fabrication of 3-D ICs. The core of the book discusses the technology platform for pre-packaging wafer lever 3-D ICs. However, this book does not include a detailed discussion of 3-D ICs design and 3-D packaging. This is an edited book based on chapters contributed by various experts in the field of wafer-level 3-D ICs process technology. They are from academia, research labs and industry.

Download or read book Design of 3D Integrated Circuits and Systems written by Rohit Sharma and published by CRC Press. This book was released on 2018-09-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional (3D) integration of microsystems and subsystems has become essential to the future of semiconductor technology development. 3D integration requires a greater understanding of several interconnected systems stacked over each other. While this vertical growth profoundly increases the system functionality, it also exponentially increases the design complexity. Design of 3D Integrated Circuits and Systems tackles all aspects of 3D integration, including 3D circuit and system design, new processes and simulation techniques, alternative communication schemes for 3D circuits and systems, application of novel materials for 3D systems, and the thermal challenges to restrict power dissipation and improve performance of 3D systems. Containing contributions from experts in industry as well as academia, this authoritative text: Illustrates different 3D integration approaches, such as die-to-die, die-to-wafer, and wafer-to-wafer Discusses the use of interposer technology and the role of Through-Silicon Vias (TSVs) Presents the latest improvements in three major fields of thermal management for multiprocessor systems-on-chip (MPSoCs) Explores ThruChip Interface (TCI), NAND flash memory stacking, and emerging applications Describes large-scale integration testing and state-of-the-art low-power testing solutions Complete with experimental results of chip-level 3D integration schemes tested at IBM and case studies on advanced complementary metal–oxide–semiconductor (CMOS) integration for 3D integrated circuits (ICs), Design of 3D Integrated Circuits and Systems is a practical reference that not only covers a wealth of design issues encountered in 3D integration but also demonstrates their impact on the efficiency of 3D systems.

Download or read book A Yield Improving Routing Concept for a New 3D Chip Stacking Technology written by Ahmed Faisal and published by . This book was released on 2005 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 3D IC Integration and Packaging written by John H. Lau and published by McGraw Hill Professional. This book was released on 2015-07-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to 3D IC integration and packaging technology3D IC Integration and Packaging fully explains the latest microelectronics techniques for increasing chip density and maximizing performance while reducing power consumption. Based on a course developed by its author, this practical guide offers real-world problem-solving methods and teaches the trade-offs inherent in making system-level decisions. Explore key enabling technologies such as TSV, thin-wafer strength measurement and handling, microsolder bumping, redistribution layers, interposers, wafer-to-wafer bonding, chip-to-wafer bonding, 3D IC and MEMS, LED, and complementary metal-oxide semiconductor image sensors integration. Assembly, thermal management, and reliability are covered in complete detail.3D IC Integration and Packaging covers:• 3D integration for semiconductor IC packaging• Through-silicon vias modeling and testing• Stress sensors for thin-wafer handling and strength measurement• Package substrate technologies• Microbump fabrication, assembly, and reliability• 3D Si integration• 2.5D/3D IC integration• 3D IC integration with passive interposer• Thermal management of 2.5D/3D IC integration• Embedded 3D hybrid integration• 3D LED and IC integration• 3D MEMS and IC integration• 3D CMOS image sensors and IC integration• PoP, chip-to-chip interconnects, and embedded fan-out WLP

Download or read book 3D Integration for NoC based SoC Architectures written by Abbas Sheibanyrad and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research challenges that are due to the introduction of the 3rd dimension in chips for researchers and covers the whole architectural design approach for 3D-SoCs. Nowadays the 3D-Integration technologies, 3D-Design techniques, and 3D-Architectures are emerging as interesting, truly hot, broad topics. The present book gathers the recent advances in the whole domain by renowned experts in the field to build a comprehensive and consistent book around the hot topics of three-dimensional architectures and micro-architectures. This book includes contributions from high level international teams working in this field.

Download or read book Encyclopedia of Packaging Materials Processes and Mechanics written by Avram Bar-Cohen and published by World Scientific. This book was released on 2019 with total page 1079 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Packaging materials, assembly processes, and the detailed understanding of multilayer mechanics have enabled much of the progress in miniaturization, reliability, and functional density achieved by modern electronic, microelectronic, and nanoelectronic products. The design and manufacture of miniaturized packages, providing low-loss electrical and/or optical communication, while protecting the semiconductor chips from environmental stresses and internal power cycling, require a carefully balanced selection of packaging materials and processes. Due to the relative fragility of these semiconductor chips, as well as the underlying laminated substrates and the bridging interconnect, selection of the packaging materials and processes is inextricably bound with the mechanical behavior of the intimately packaged multilayer structures, in all phases of development for traditional, as well as emerging, electronic product categories. The Encyclopedia of Packaging Materials, Processes, and Mechanics, compiled in 8, multi-volume sets, provides comprehensive coverage of the configurations and techniques, assembly materials and processes, modeling and simulation tools, and experimental characterization and validation techniques for electronic packaging. Each of the volumes presents the accumulated wisdom and shared perspectives of leading researchers and practitioners in the packaging of electronic components. The Encyclopedia of Packaging Materials, Processes, and Mechanics will provide the novice and student with a complete reference for a quick ascent on the packaging "learning curve," the practitioner with a validated set of techniques and tools to face every challenge in packaging design and development, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in the assembly and mechanical behavior of electronic and photonic components and systems. It will be most beneficial to undergraduate and graduate students studying materials, mechanical, electrical, and electronic engineering, with a strong interest in electronic packaging applications"--Publisher's website

Download or read book Vertical 3D Memory Technologies written by Betty Prince and published by John Wiley & Sons. This book was released on 2014-08-13 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The large scale integration and planar scaling of individual system chips is reaching an expensive limit. If individual chips now, and later terrabyte memory blocks, memory macros, and processing cores, can be tightly linked in optimally designed and processed small footprint vertical stacks, then performance can be increased, power reduced and cost contained. This book reviews for the electronics industry engineer, professional and student the critical areas of development for 3D vertical memory chips including: gate-all-around and junction-less nanowire memories, stacked thin film and double gate memories, terrabit vertical channel and vertical gate stacked NAND flash, large scale stacking of Resistance RAM cross-point arrays, and 2.5D/3D stacking of memory and processor chips with through-silicon-via connections now and remote links later. Key features: Presents a review of the status and trends in 3-dimensional vertical memory chip technologies. Extensively reviews advanced vertical memory chip technology and development Explores technology process routes and 3D chip integration in a single reference

Download or read book Three Dimensional Integration of Semiconductors written by Kazuo Kondo and published by Springer. This book was released on 2015-12-09 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with background concerning three-dimensional integration - including their low energy consumption and high speed image processing - and then proceeds to how to construct them and which materials to use in particular situations. The book covers numerous applications, including next generation smart phones, driving assistance systems, capsule endoscopes, homing missiles, and many others. The book concludes with recent progress and developments in three dimensional packaging, as well as future prospects.