Download or read book Process Control in Speed Frame written by R. Senthilkumar and published by Createspace Independent Publishing Platform. This book was released on 2016-05-19 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Speed frame is also called as simplex or roving frame. The speed frame process minimizes the sliver weight to a suitable size for spinning into yarn and inserting twist, which maintains the integrity of the draft strands. It is impossible to feed the sliver to ring frame for yarn production due to limitation in draft in ring frame.

Download or read book Process Control and Yarn Quality in Spinning written by G. Thilagavathi and published by CRC Press. This book was released on 2016-01-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book outlines the concepts of raw material selection, control of various process parameters in the preparatory processes like blow room, carding, combing preparatory and comber to optimize the process conditions, and analysis and interpretation of various types of test reports to find out the source of fault.

Download or read book Process Control in Drawing written by R. Senthilkumar and published by Createspace Independent Publishing Platform. This book was released on 2016-05-19 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the spinning process, the unevenness of the product increases from stage to stage after the draw frame due to the steady decrease in number of fibres in the section. Uniform arrangement of fibres becomes more difficult because of their smaller number. Drawing is the important process where the card slivers are doubled and drafted in order to level the unevenness present in each sliver. Doubling is the combining of several slivers and drafting is attenuation. Drawing therefore involves the processes of drafting and doubling, with good fibre control being of the essence throughout.

Download or read book Process Control in Textile Manufacturing written by Abhijit Majumdar and published by Elsevier. This book was released on 2012-11-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex raw materials and manufacturing processes mean the textile industry is particularly dependent on good process control to produce high and consistent product quality. Monitoring and controlling process variables during the textile manufacturing process also minimises waste, costs and environmental impact. Process control in textile manufacturing provides an important overview of the fundamentals and applications of process control methods.Part one introduces key issues associated with process control and principles of control systems in textile manufacturing. Testing and statistical quality control are also discussed before part two goes on to consider control in fibre production and yarn manufacture. Chapters review process and quality control in natural and synthetic textile fibre cultivation, blowroom, carding, drawing and combing. Process control in ring and rotor spinning and maintenance of yarn spinning machines are also discussed. Finally part three explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a final discussion of process control in apparel manufacturing.With its distinguished editors and international team of expert contributors, Process control in textile manufacturing is an essential guide for textile engineers and manufacturers involved in the processing of textiles, as well as academic researchers in this field. - Provides an important overview of the fundamentals and applications of process control methods - Discusses key issues associated with process control and principles of control systems in textile manufacturing, before addressing testing and statistical quality control - Explores process control in the manufacture of knitted, woven, nonwoven textiles and colouration and finishing, with a discussion on process control in apparel manufacturing

Download or read book Process Management in Spinning written by R. Senthil Kumar and published by CRC Press. This book was released on 2014-09-23 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Straightforward Text Summarizing All Aspects of Process Control Textile manufacturing is one of the largest industries in the world, second only to agriculture. Spinning covers a prominent segment in textile manufacturing, and this budding industry continues to thrive and grow. Process Management in Spinning considers aspect of process management, and offers insight into the process control procedures and methods of spinning. Focusing on the technology as well as the management of the process, it examines both the economic and technological advancements currently taking place in the spinning industry. This text takes a close look at the advancing technology in manufacturing and process, and product quality control. It provides a basic overview of the subject, and also presents applications of this technology for practicing engineers. Incorporates Industry-Based, Real-World Examples The book contains 15 chapters that specifically address the stages of process control, energy management methods, humidification and ventilation systems basics, pollution management, process management tools, productivity, waste control, material handling, and other aspects of spinning mills. It also includes real-time case studies involving typical problems that arise in spinning processes and strategies used to contain them. The author provides a broad outlook on various topics including mixing, winding, raw material and optimizing raw material properties, bale management, yarn engineering systems, processing, and process management systems. He also details the defects associated with each and every process with causes, effects, and control measures. The book addresses process management as it relates to productivity, quality, and costs, as well as process control as it relates to man, machine, and material. Provides the scientific method for optimization/optimizing the properties of the fibers Familiarizes the reader with remedial measures to enhance the quality of the product Addresses productivity measurement and its role in controlling the cost of the manufacturing process Contains detailed examples, as well as linear programming and optimization techniques, and statistical applications Covers the areas of process control methods in spinning, defect analysis and rectification, improving productivity and quality, and using statistical tools Process Management in Spinning establishes the various process management measures required to help improve the process efficiency in spinning mills and the textile industry overall. Aimed at professionals in the textile industry, this text is a perfect resource for textile engineers/technologists/manufacturers, spin quality control engineers, spin quality assurance personnel, and other industry professionals.

Download or read book Research Design for Combed Yarn Quality written by Dr. Sukhvir Singh and published by LWRN Studio. This book was released on 2023-05-22 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this study is to investigate the effects of finisher drawframe storage variables such as can-spring stiffness, sliver deposition rate and sliver coils position on the quality characteristics of the combed ring-spun yarn. The research design also includes the effect of sliver storage time on the quality of stored sliver and subsequently on roving and yarn produced on speedframe and ringframe respectively. The critical role of storage can-spring parameters on combed sliver, roving and yarn quality has been frequently discussed in spinning preparatory literature. However, a clear understanding of the nature of relationships, as mentioned above, is not yet well established by the previous works. So, there is a need to study the underlying factors at a deeper level that may provide further insight into ways to control ring yarn quality. Therefore, the present investigations were carried out to observe the effects of uncommon process parameters namely can-spring stiffness, delivery rate and sliver coils position at post comber drawing stage on sliver, roving and yarn quality when slivers were allowed to feed without any storage time and after 8 hours storage time. The research plan was developed by implementing a three factor three level Box-Behnken design of experiment. The effects of aforementioned variables were studied on combed yarn unevenness properties (U%, CVm % and Imperfections), tensile properties (yarn tenacity and breaking elongation) and S3 hairiness. The results showed that the effects of can-spring stiffness and sliver coils position are significant on yarn evenness, CVm%, imperfections, tenacity and S3 hairiness. However, the combed yarn quality parameters did not show any significant relationships with the post combing drawing delivery rate. It was observed that the combed yarn produced from bottom position sliver coils using older can-spring showed less even yarn with improved imperfection, having less strength and more hairiness. The combed yarn quality further deteriorates on allowing 8 hours of sliver storage time. It was found that the bottom sliver coils experience the highest compressive forces compared to other sliver coils position and adjacent sliver coils stickiness was observed which result in sliver stretching and failure at the time of processing on speedframe. Also, older can- spring of reduced spring stiffness result in buckling which leads to stored sliver contact with rough sidewalls caused weak & hairy sliver. The combed yarn samples produced from such storage cans leads to uneven yarn with more imperfections, weaker and hairy yarn structure. The contribution of sliver coils position was found highest followed by can-spring stiffness in deciding combed yarn quality parameters in the current study. However, the effect of finisher drawframe delivery speed on yarn quality parameters was found minimal. Apart from this, an attempt has been made to understand the effect of dynamics of the can-spring mechanism on combed sliver handling at the time of sliver deposition at drawframe through bond graph modeling approach. The behaviour of the can-spring used for combed sliver storage was found linear as expected. It was observed that bond graph modeling of can-spring mechanism provides us information on more states in a systematic and algorithmic manner compared to any other technique. Linear momentum, linear displacement of top plate, force experienced by the combed sliver and load versus displacement response of the mechanism was also studied. However, the more rigorous study is required to study the accurate dynamics of such precise systems because the force and the stresses experienced by the combed sliver are too low due to very low inter-fiber cohesion.

Download or read book Advances in Manufacturing Production Management and Process Control written by Beata Mrugalska and published by Springer Nature. This book was released on 2020-06-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advances in the broadly defined field of advanced manufacturing and process control. It reports on cutting-edge strategies for sustainable production and product life cycle management, and on a variety of people-centered issues in the design, operation and management of manufacturing systems and processes. Further, it presents digital modeling systems and additive manufacturing technologies, including advanced applications for different purposes, and discusses in detail the implementation of and challenges imposed by 3D printing technologies. Based on three AHFE 2020 Conferences (the AHFE 2020 Virtual Conference on Human Aspects of Advanced Manufacturing, the AHFE 2020 Virtual Conference on Advanced Production Management and Process Control and the AHFE 2020 Virtual Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, the book merges ergonomics research, design applications, and up-to-date analyses of various engineering processes. It brings together experimental studies, theoretical methods and best practices, highlights future trends and suggests directions for further technological developments and the improved integration of technologies and humans in the manufacturing industry.

Download or read book A Practical Guide on Quality Management in Spinning written by B. Purushothama and published by CRC Press. This book was released on 2024-08-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a hands-on guide that discusses quality management in spinning. It details the techniques, insights and best practices that weave excellence into every fiber. The subject matter of this book discusses the concepts of product objectives and the impact of product features at customer’s end with examples. Print edition not for sale in South Asia (India, Sri Lanka, Nepal, Bangladesh, Pakistan and Bhutan)

Download or read book Data Acquisition and Process Control Using Personal Computers written by Ozkul and published by Routledge. This book was released on 2017-11-22 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: ""Covers all areas of computer-based data acquisition--from basic concepts to the most recent technical developments--without the burden of long theoretical derivations and proofs. Offers practical, solution-oriented design examples and real-life case studies in each chapter and furnishes valuable selection guides for specific types of hardware.

Download or read book International Advanced Researches Engineering Congress 2017 Proceeding Book written by Recep HALICIOGLU and published by Dr. R. HALICIOGLU. This book was released on 2017-12-29 with total page 2770 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTERNATIONAL WORKSHOPS (at IAREC'17) (This book inclueds English (main) and Turkish languages) International Workshop on Mechanical Engineering International Workshop on Mechatronics Engineering International Workshop on Energy Systems Engineering International Workshop on Automotive Engineering and Aerospace Engineering International Workshop on Material Engineering International Workshop on Manufacturing Engineering International Workshop on Physics Engineering International Workshop on Electrical and Electronics Engineering International Workshop on Computer Engineering and Software Engineering International Workshop on Chemical Engineering International Workshop on Textile Engineering International Workshop on Architecture International Workshop on Civil Engineering International Workshop on Geomatics Engineering International Workshop on Industrial Engineering International Workshop on Food Engineering International Workshop on Aquaculture Engineering International Workshop on Agriculture Engineering International Workshop on Mathematics Engineering International Workshop on Bioengineering Engineering International Workshop on Biomedical Engineering International Workshop on Genetic Engineering International Workshop on Environmental Engineering International Workshop on Other Engineering Science

Download or read book Process Management in Spinning written by R. Senthil Kumar and published by CRC Press. This book was released on 2014-09-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Straightforward Text Summarizing All Aspects of Process ControlTextile manufacturing is one of the largest industries in the world, second only to agriculture. Spinning covers a prominent segment in textile manufacturing, and this budding industry continues to thrive and grow. Process Management in Spinning considers aspect of process management,

Download or read book Automation in Textile Machinery written by L. Ashok Kumar and published by CRC Press. This book was released on 2018-03-20 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation is the use of various control systems for operating equipment such as machinery and processes. In line, this book deals with comprehensive analysis of the trends and technologies in automation and control systems used in textile engineering. The control systems descript in all chapters is to dissect the important components of an integrated control system in spinning, weaving, knitting, chemical processing and garment industries, and then to determine if and how the components are converging to provide manageable and reliable systems throughout the chain from fiber to the ultimate customer. Key Features: • Describes the design features of machinery for operating various textile machineries in product manufacturing • Covers the fundamentals of the instrumentation and control engineering used in textile machineries • Illustrates sensors and basic elements for textile automation • Highlights the need of robotics in textile engineering • Reviews the overall idea and scope of research in designing textile machineries

Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2010-07-27 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of its capacity for continuous development and flexibility of use, the laser has become a mainstream manufacturing tool in many industrial sectors. This timely book relays the state-of-the-art in laser materials processing technology and applications and likely advances to be made from current research taking place around the world. The book also promotes appreciation for laser applications in a variety of industrial sectors.After two introductory chapters, the book reviews the main areas of laser processing. Starting with laser cutting and machining, the book discusses laser welding, annealing and hardening. It then considers surface treatment, coating and materials deposition as well as other engineering techniques such as peening and net-shape engineering, before discussing laser micro and nano-fabrication techniques. The book concludes by looking at modelling and process control.With its distinguished editorial team and contributions from renowned researchers working in every corner of the globe, Advances in laser materials processing provides a comprehensive yet detailed coverage of the many topics that comprise the field of laser materials processing. It provides a reference source for the scientists and engineers in such areas as metals processing and microelectronics, as well those conducting laser materials processing research in either academia or industry. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores the challenges, potential and future directions through the continuous development of new, application-specific lasers in materials processing - Discusses coatings and material deposition with lasers with including the production of coatings by laser-assisted processes, laser direct metal deposition and laser induced forward transfer (LIFT)

Download or read book Cotton written by and published by . This book was released on 1927 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Industrial Control Technology written by Peng Zhang and published by William Andrew. This book was released on 2010-08-26 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques

Download or read book 2013 International Conference on Electrical Control and Automation Engineering ECAE2013 written by Dr. S. Momani and published by DEStech Publications, Inc. This book was released on 2014-01-07 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2013 International Conference on Electrical, Control and Automation Engineering(ECAE2013) aims to provide a forum for accessing to the most up-to-date and authoritative knowledge from both Electrical, Control and Automation Engineering. ECAE2013 features unique mixed topics of Electrical Engineering, Automation, Control Engineering and so on. The goal of this conference is to bring researchers, engineers, and students to the areas of Electrical, Control and Automation Engineering to share experiences and original research contributions on those topics. Researchers and practitioners are invited to submit their contributions to ECAE2013

Download or read book Canadian Textile Journal written by and published by . This book was released on 1927 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: