Download or read book Proceedings of the Annual Meeting written by American Drug Manufacturers Association and published by . This book was released on 1921 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Study of Clay Shale Slopes Along the Panama Canal written by R. J. Lutton and published by . This book was released on 1970 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.

Download or read book Methods of Foundation Engineering written by Z. Bažant and published by Elsevier. This book was released on 2014-08-28 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of Foundation Engineering covers the theory, analysis, and practice of foundation engineering, as well as its soil mechanics and structural design aspects and principles. The book is divided into five parts encompassing 21 chapters. Part A is of an introductory character and presents a brief review of the various types of foundation structures used in civil engineering and their historical development. Part B provides the theoretical fundamentals of soil and rock mechanics, which are of importance for foundation design. Part C deals with the design of the footing area of spread footings and discusses the shallow foundation methods. Part D describes the methods of deep foundations, while Part E is devoted to special foundation methods. Each chapter in Parts C to E starts with an introduction containing a synopsis of the matter being discussed and giving suggestions as to the choice of a suitable method of foundation. This is followed by a description of the methods generally used in practice. Simple analyses of structures, presented at the conclusion of each chapter, can be carried out by a pocket calculator. This book will prove useful to practicing civil and design engineers.

Download or read book USA CRREL Technical Publications written by Cold Regions Research and Engineering Laboratory (U.S.) and published by . This book was released on 1972 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cold Formed Steel Design written by Wei-Wen Yu and published by John Wiley & Sons. This book was released on 2019-10-29 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the latest AISI North American specifications for cold-formed steel design Hailed by professionals around the world as the definitive text on the design of cold-formed steel, this book provides descriptions of the construction and structural behavior of cold-formed steel members and connections from both theoretical and experimental points of view. Updated to reflect the 2016 AISI North American specification and 2015 North American framing standards, this all-new fifth edition offers readers a better understanding of the analysis and design of the thin-walled, cold-formed steel structures that have been widely used in building construction and other areas in recent years. Cold-Formed Steel Design, 5th Edition has been revised and reorganized to incorporate the Direct Strength Method. It discusses the reasons and justification for the various design provisions of the North American specification and framing design standards. It provides chapter coverage of: the types of steels and their most important mechanical properties; the fundamentals of buckling modes; commonly used terms; the design of flexural members, compression members and closed cylindrical tubes, and of beam–columns using ASD, LRFD, and LSD methods; shear diaphragms and shell roof structures; standard corrugated sheets; and more. Updated to the 2016 North American (AISI S100) design specification and 2015 North American (AISI S240) design standard Offers thorough coverage of ASD, LRFD, LSD, and DSM design methods Integrates DSM in the main body of design provisions Features a new section on Power-Actuated Fastener (PAF) Connections Provides new examples and explanations of design provisions Cold-Formed Steel Design, 5th Edition is not only instructive for students, but can serve as a major source of reference for structural engineers, researchers, architects, and construction managers.

Download or read book History of Progress written by W. Allen Marr and published by ASCE Publications. This book was released on 2003-01-01 with total page 2392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Geo-Institute of ASCE This collection of 78 historical papers provides a wide view of the rich body of literature that documents the development of fundamental concepts geotechnical engineering and their application to practical problems. From the highly theoretical to the elegantly practical, the papers in this one-of-a-kind collection are significant for their contributions to the geotechnical engineering literature. Among the writings of more than 60 geotechnical engineering pioneers are several by Karl Terzaghi, widely known as the father of soil mechanics, R.R. Proctor, Arthur Casagrande, and Ralph Peck. Many of these papers contain information as useful today as when they were first written. Others provide great insight into the origins and development of the field and the thought processes of its leaders.

Download or read book Seafloor Processes and Geotechnology written by Ronald Chaney and published by CRC Press. This book was released on 2015-11-04 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ideal resource for civil engineers working with offshore structures, pipelines, dredging, and coastal erosion, Seafloor Processes and Geotechnology bridges the gap between the standard soil mechanics curriculum of civil engineering and published material on marine geotechnology. Utilizing organized information on sediments and foundations for ma

Download or read book Guidelines for Open Pit Slope Design in Weak Rocks written by Derek Martin and published by CSIRO PUBLISHING. This book was released on 2018-01-10 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Weak rocks encountered in open pit mines cover a wide variety of materials, with properties ranging between soil and rock. As such, they can provide a significant challenge for the slope designer. For these materials, the mass strength can be the primary control in the design of the pit slopes, although structures can also play an important role. Because of the typically weak nature of the materials, groundwater and surface water can also have a controlling influence on stability. Guidelines for Open Pit Slope Design in Weak Rocks is a companion to Guidelines for Open Pit Slope Design, which was published in 2009 and dealt primarily with strong rocks. Both books were commissioned under the Large Open Pit (LOP) project, which is sponsored by major mining companies. These books provide summaries of the current state of practice for the design, implementation and assessment of slopes in open pits, with a view to meeting the requirements of safety, as well as the recovery of anticipated ore reserves. This book, which follows the general cycle of the slope design process for open pits, contains 12 chapters. These chapters were compiled and written by industry experts and contain a large number of case histories. The initial chapters address field data collection, the critical aspects of determining the strength of weak rocks, the role of groundwater in weak rock slope stability and slope design considerations, which can differ somewhat from those applied to strong rock. The subsequent chapters address the principal weak rock types that are encountered in open pit mines, including cemented colluvial sediments, weak sedimentary mudstone rocks, soft coals and chalk, weak limestone, saprolite, soft iron ores and other leached rocks, and hydrothermally altered rocks. A final chapter deals with design implementation aspects, including mine planning, monitoring, surface water control and closure of weak rock slopes. As with the other books in this series, Guidelines for Open Pit Slope Design in Weak Rocks provides guidance to practitioners involved in the design and implementation of open pit slopes, particularly geotechnical engineers, mining engineers, geologists and other personnel working at operating mines.

Download or read book Terzaghi Lectures written by Karl Terzaghi and published by ASCE Publications. This book was released on 1986-01-01 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Executive Committee of the Geotechnical Engineering Division of ASCE. This Geotechnical Special Publication contains eight lectures given between 1974 and 1983 in honor of Karl Terzaghi and repressenting diverse aspects of geotechnical engineering and engineering geology. Topics include: the relationship of geology and geotechnical engineering and how a study of the geology of engineering sites is an important starting point for all geotechnical site studies; effects of dynamic soil properties on soil-structure interaction; bearing capacity and settlement of pile foundations; design and construction of drilled shafts; evaluating calculated risk in geotechnical engineering; proposal forØthe establishment of a national center for investigating civil engineering failures, with several case studies; pre-Columbian earth construction in the Americas and technological developments between 2,500 and 500 years ago; and recent progress in the design and construction of concrete-face rockfill dams. The 1978 lecture by the late N.M. Newmark is not included.

Download or read book Geotechnical Properties Behavior and Performance of Calcareous Soils written by K. R. Demars and published by ASTM International. This book was released on 1982 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Earthquake Engineering written by Steven L. Kramer and published by CRC Press. This book was released on 2024-11-29 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated second edition provides an introduction to geotechnical earthquake engineering for first-year graduate students in geotechnical or earthquake engineering graduate programs with a level of detail that will also be useful for more advanced students as well as researchers and practitioners. It begins with an introduction to seismology and earthquake ground motions, then presents seismic hazard analysis and performance-based earthquake engineering (PBEE) principles. Dynamic soil properties pertinent to earthquake engineering applications are examined, both to facilitate understanding of soil response to seismic loads and to describe their practical measurement as part of site characterization. These topics are followed by site response and its analysis and soil–structure interaction. Ground failure in the form of soil liquefaction, cyclic softening, surface fault rupture, and seismically induced landslides are also addressed, and the book closes with a chapter on soil improvement and hazard mitigation. The first edition has been widely used around the world by geotechnical engineers as well as many seismologists and structural engineers. The main text of this book and the four appendices: • Cover fundamental concepts in applied seismology, geotechnical engineering, and structural dynamics. • Contain numerous references for further reading, allowing for detailed exploration of background or more advanced material. • Present worked example problems that illustrate the application of key concepts emphasized in the text. • Include chapter summaries that emphasize the most important points. • Present concepts of performance-based earthquake engineering with an emphasis on uncertainty and the types of probabilistic analyses needed to implement PBEE in practice. • Present a broad, interdisciplinary narrative, drawing from the fields of seismology, geotechnical engineering, and structural engineering to facilitate holistic understanding of how geotechnical earthquake engineering is applied in seismic hazard and risk analyses and in seismic design.

Download or read book Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on 1979 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: First multi-year cumulation covers six years: 1965-70.

Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book Resources in Education written by and published by . This book was released on 1985 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book National Library of Medicine Current Catalog written by National Library of Medicine (U.S.) and published by . This book was released on with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: