Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems in Conjunction with the Ninth National Seminar on Aerospace Structures 7 10 July 1999 J N Tata Auditorium Indian Institute of Science Bangalore 560012 India written by International Conference on Smart Materials Structures and Systems and published by . This book was released on 1999 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems written by and published by Allied Publishers. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Aerospace Vehicles and Propulsion Systems written by S. Kishore Kumar and published by Springer Nature. This book was released on 2021-03-18 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers presented in the Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD 2018), which was jointly organized by Aeronautical Development Agency (the nodal agency for the design and development of combat aircraft in India), Gas-Turbine Research Establishment (responsible for design and development of gas turbine engines for military applications), and CSIR-National Aerospace Laboratories (involved in major aerospace programs in the country such as SARAS program, LCA, Space Launch Vehicles, Missiles and UAVs). It brings together experiences of aerodynamicists in India as well as abroad in Aerospace Vehicle Design, Gas Turbine Engines, Missiles and related areas. It is a useful volume for researchers, professionals and students interested in diversified areas of aerospace engineering.
Download or read book Planning Support Systems for Sustainable Urban Development written by Stan Geertman and published by Springer Science & Business Media. This book was released on 2013-06-20 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects a selection of the best articles presented at the CUPUM (Computers in Urban Planning and Urban Management) conference, held in the second week of July 2013 in Utrecht, the Netherlands. The articles included were selected by external reviewers using a double blind process.
Download or read book The Mind of an Engineer Volume 2 written by Purnendu Ghosh and published by Springer Nature. This book was released on 2019-11-18 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of chapters reflecting the experiences and achievements of some of the Fellows of the Indian National Academy of Engineering (INAE). The book comprises essays that look at reminiscences, eureka moments, inspirations, challenges and opportunities in the journey of an engineering professional. The chapters look at the paths successful engineering professionals take towards self-realisation, the milestones they crossed, and the goals they reached. The book contains 38 chapters on diverse topics that truly reflect the way the meaningful mind of an engineer works.
Download or read book Driving the Economy through Innovation and Entrepreneurship written by Department of Management Studies, and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technologies are central to creation of wealth through business expansion leading to economic development. This is visible in the fast-paced technology-induced economic growth experienced by most countries, especially by rapidly growing economies such as India, China, Brazil, South Korea, among others. Increasing individual scientific contribution, nurturing entrepreneurial talent, promoting innovative competence, strategically prioritizing and investing in technologies and enhancing national economic wealth are some of the important Technology Management goals. Technology Management has emerged as a strategic and knowledge domain of interest to academicians, practitioners, and policy makers across the globe. Technology Management has also evolved into an inter-disciplinary concern which requires national and international collaborations and exchange of insights. Keeping this objective in mind the International Conference on Technology Management is organized by the Department of Management Studies, Indian Institute of Science, Bangalore, a leader in research and education in Technology Management for the last several decades. This conference aims at integrating experiences of academicians, industry leaders, Technology Managers and Innovators towards effective knowledge creation and economic development. The contributions of the present volume are presented at the International Conference on Technology Management-2012 during 18-20 July 2012.
Download or read book The Mind of an Engineer written by Purnendu Ghosh and published by Springer. This book was released on 2015-11-27 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Indian National Academy of Engineering (INAE) promotes the endeavour of the practitioners of engineering and technology and related sciences to solve the problems of national importance. The book is an initiative of the INAE and a reflection of the experiences of some of the Fellows of the INAE in the fields of science, technology and engineering. The book is about the reminiscences, eureka moments, inspirations, challenges and opportunities in the journey the professionals took toward self-realisation and the goals they achieved. The book contains 58 articles on diverse topics that truly reflects the way the meaningful mind of an engineer works.
Download or read book Cryogenic Heat Transfer written by Randall F. Barron and published by Taylor & Francis. This book was released on 1999-05-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied heat transfer principles in the range of extremely low temperatures. The specific features of heat transfer at cryogenic temperatures, such as variable properties, near critical convection, and Kapitza resistance, are described. This book includes many example problems, in each section, that help to illustrate the applications of t
Download or read book Game Theory And Mechanism Design written by Y Narahari and published by World Scientific. This book was released on 2014-03-13 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a self-sufficient treatment of a key tool, game theory and mechanism design, to model, analyze, and solve centralized as well as decentralized design problems involving multiple autonomous agents that interact strategically in a rational and intelligent way. The contents of the book provide a sound foundation of game theory and mechanism design theory which clearly represent the “science” behind traditional as well as emerging economic applications for the society.The importance of the discipline of game theory has been recognized through numerous Nobel prizes in economic sciences being awarded to game theorists, including the 2005, 2007, and 2012 prizes. The book distills the marvelous contributions of these and other celebrated game theorists and presents it in a way that can be easily understood even by senior undergraduate students.A unique feature of the book is its detailed coverage of mechanism design which is the art of designing a game among strategic agents so that a social goal is realized in an equilibrium of the induced game. Another feature is a large number of illustrative examples that are representative of both classical and modern applications of game theory and mechanism design. The book also includes informative biographical sketches of game theory legends, and is specially customized to a general engineering audience.After a thorough reading of this book, readers would be able to apply game theory and mechanism design in a principled and mature way to solve relevant problems in computer science (esp, artificial intelligence/machine learning), computer engineering, operations research, industrial engineering and microeconomics.
Download or read book Antennas for Information Super Skyways written by Perambur S. Neelakanta and published by Research Studies Press Limited. This book was released on 2003 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of this text is to present the salient aspects of antenna technology and relate these to working applications. It contains a mix of topics; covering the analytical aspects of indoor and outdoor antennas and their relevance to wireless/mobile communications, along with descriptions of the underlying principles and the associated antenna design considerations. The scope of the book covers industry-oriented research, design and development of wireless antennas and is suitable as a course text for students at postgraduate and undergraduate level.
Download or read book Bursty Human Dynamics written by Márton Karsai and published by Springer. This book was released on 2017-12-05 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview on emergent bursty patterns in the dynamics of human behaviour. It presents common and alternative understanding of the investigated phenomena, and points out open questions worthy of further investigations. The book is structured as follows. In the introduction the authors discuss the motivation of the field, describe bursty phenomena in case of human behaviour, and relate it to other disciplines. The second chapter addresses the measures commonly used to characterise heterogeneous signals, bursty human dynamics, temporal paths, and correlated behaviour. These definitions are first introduced to set the basis for the discussion of the third chapter about the observations of bursty human patterns in the dynamics of individuals, dyadic interactions, and collective behaviour. The subsequent fourth chapter discusses the models of bursty human dynamics. Various mechanisms have been proposed about the source of the heterogeneities in human dynamics, which leads to the introduction of conceptually different modelling approaches. The authors address all of these perspectives objectively, highlight their strengths and shortcomings, and mention possible extensions to them. The fifth chapter addresses the effect of individual heterogeneous behaviour on collective dynamics. This question in particular has been investigated in various systems including spreading phenomena, random walks, and opinion formation dynamics. Here the main issues are whether burstiness speeds up or slows down the co-evolving processes, and how burstiness modifies time-dependent paths in the system that determine the spreading patterns of any kind of information or influence. Finally in the sixth chapter the authors end the review with a discussion and future perspectives. It is an ideal book for researchers and students who wish to enter the field of bursty human dynamics or want to expand their knowledge on such phenomena.
Download or read book Projectile Impact written by S. Syngellakis and published by WIT Press. This book was released on 2014-03-04 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: High energy impact phenomena have been investigated by engineers of various backgrounds and disciplines. Structures often need to be designed against impact or potential attack and on the other hand the removal of decommissioned structures may be achieved by shaped charge impact, alternatively known as explosive cutting. The topic of ballistic impact is wide-ranging and encompasses various levels of kinetic energy input as well as a multitude of projectile-target materials and geometries. It has thus become the object of many experimental and analytical investigations resulting in numerous sparsely-spread articles in periodicals and conference proceedings as well as monographs narrowly focusing on specific types and ranges of impact scenarios. This volume describes a broad spectrum of analytical and experimental work in this area, thus providing considerable insight into the complexity and diversity of impact phenomena. By addressing a significant number of important issues it combines, rather uniquely, subject breadth and density with in-depth study of impact events of great engineering interest.
Download or read book Plant Metal Interactions written by Sudhakar Srivastava and published by Springer. This book was released on 2019-07-26 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal toxicity and deficiency are both common abiotic problems faced by plants. While metal contamination around the world is a critical issue, the bioavailability of some essential metals like zinc (Zn) and selenium (Se) can be seriously low in other locations. The list of metals spread in high concentrations in soil, water and air includes several toxic as well as essential elements, such as arsenic (As), cadmium (Cd), chromium (Cr), aluminum (Al), and selenium (Se). The problems for some metals are geographically confined, while for others, they are widespread. For instance, arsenic is an important toxic metalloid whose contamination in Southeast Asia and other parts of world is well documented. Its threats to human health via food consumption have generated immense interest in understanding plants’ responses to arsenic stress. Metals constitute crucial components of key enzymes and proteins in plants. They are important for the proper growth and development of plants. In turn, plants serve as sources of essential elements for humans and animals. Studies of their physiological effects on plants metabolism have led to the identification of crucial genes and proteins controlling metal uptake and transport, as well as the sensing and signaling of metal stresses. Plant-Metal Interactions sheds light on the latest development and research in analytical biology with respect to plant physiology. More importantly, it showcases the positive and negative impacts of metals on crop plants growth and productivity.
Download or read book Demystifying the Brain written by V. Srinivasa Chakravarthy and published by Springer. This book was released on 2018-12-07 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an emerging new vision of the brain, which is essentially expressed in computational terms, for non-experts. As such, it presents the fundamental concepts of neuroscience in simple language, without overwhelming non-biologists with excessive biological jargon. In addition, the book presents a novel computational perspective on the brain for biologists, without resorting to complex mathematical equations. It addresses a comprehensive range of topics, starting with the history of neuroscience, the function of the individual neuron, the various kinds of neural network models that can explain diverse neural phenomena, sensory-motor function, language, emotions, and concluding with the latest theories on consciousness. The book offers readers a panoramic introduction to the “new brain” and a valuable resource for interdisciplinary researchers looking to gatecrash the world of neuroscience.
Download or read book Technology Developments the Role of Mechanism and Machine Science and IFToMM written by Marco Ceccarelli and published by Springer Science & Business Media. This book was released on 2011-05-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of a series that will focus on MMS (Mechanism and Machine Science). This book also presents IFToMM, the International Federation on the Promotion of MMS and its activity. This volume contains contributions by IFToMM officers who are Chairs of member organizations (MOs), permanent commissions (PCs), and technical committees (TCs), who have reported their experiences and views toward the future of IFToMM and MMS. The book is composed of three parts: the first with general considerations by high-standing IFToMM persons, the second chapter with views by the chairs of PCs and TCs as dealing with specific subject areas, and the third one with reports by the chairs of MOs as presenting experiences and challenges in national and territory communities. This book will be of interest to a wide public who wish to know the status and trends in MMS both at international level through IFToMM and in national/local frames through the leading actors of activities. In addition, the book can be considered also a fruitful source to find out “who’s who” in MMS, historical backgrounds and trends in MMS developments, as well as for challenges and problems in future activity by IFToMM community and in MMS at large.
Download or read book Aquananotechnology written by David E. Reisner and published by CRC Press. This book was released on 2014-09-24 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's fresh water supplies are dwindling rapidly-even wastewater is now considered an asset. By 2025, most of the world's population will be facing serious water stresses and shortages. Aquananotechnology: Global Prospects breaks new ground with its informative and innovative introduction of the application of nanotechnology to the remediatio
Download or read book ICoRD 13 written by Amaresh Chakrabarti and published by Springer Science & Business Media. This book was released on 2013-01-12 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases over 100 cutting-edge research papers from the 4th International Conference on Research into Design (ICoRD’13) – the largest in India in this area – written by eminent researchers from over 20 countries, on the design process, methods and tools, for supporting global product development (GPD). The special features of the book are the variety of insights into the GPD process, and the host of methods and tools at the cutting edge of all major areas of design research for its support. The main benefit of this book for researchers in engineering design and GPD are access to the latest quality research in this area; for practitioners and educators, it is exposure to an empirically validated suite of methods and tools that can be taught and practiced.
