Download or read book Proceedings of the International Conference of Numerical Analysis and Applied Mathematics 2014 ICNAAM 2014 written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2014 ICNAAM 2014 written by Theodore E. Simos and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Analysis and Applied Mathematics written by Theodore E. Simos and published by American Institute of Physics. This book was released on 2007-09-14 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed papers presented at the International Conference on Numerical Analysis and Applied Mathematics 2007, ICNAAM-2007. This conference brought together leading scientists of the international Numerical and Applied Mathematics community. More than 350 papers were submitted to be considered for presentation at ICNAAM-2007. From these submissions, 189 papers were selected after an international peer review by at least two independent reviewers.

Download or read book Computational Science and Its Applications ICCSA 2016 written by Osvaldo Gervasi and published by Springer. This book was released on 2016-07-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 9786-9790 constitutes the refereed proceedingsof the 16th International Conference on Computational Science and ItsApplications, ICCSA 2016, held in Beijing, China, in July 2016. The 239 revised full papers and 14 short papers presented at 33 workshops were carefully reviewed and selected from 849 submissions. They are organized in five thematical tracks: computational methods, algorithms and scientific applications; high performance computing and networks; geometric modeling, graphics and visualization; advanced and emerging applications; and information systems and technologies.

Download or read book Higher Education and Innovation written by Vincenzo Sapienza and published by MDPI. This book was released on 2021-02-18 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the design of an educational module for an innovative intensive program. The theme is very relevant in the contemporary approach to teaching activities. In fact, thanks to the didactic design, it is possible to obtain a strong relationship between teachers and learners, as required by the Bologna Process. It also allows a stronger definition of learning outcomes. After a general excursus on the subject, the manuscript refers to a recent experience carried out in the Aeolian Island for the Erasmus + Programme, called VVITA. In it, an international group of students and teachers spent a period in the Aeolian Islands, to focus on the features of local vernacular architecture. The attention has been addressed to the Aeolian House, which is a wonderful example of ante litteram sustainable architecture. On the island of Filicudi, one of the most beautiful of the archipelago, it has preserved its characteristics intact. The book is completed by teachers’ lectures and students’ final reports.

Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2017 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2017-08-07 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.

Download or read book Shell Structures Theory and Applications Volume 4 written by Wojciech Pietraszkiewicz and published by CRC Press. This book was released on 2017-10-30 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells are basic structural elements of modern technology and everyday life. Examples of shell structures in technology include automobile bodies, water and oil tanks, pipelines, silos, wind turbine towers, and nanotubes. Nature is full of living shells such as leaves of trees, blooming flowers, seashells, cell membranes or wings of insects. In the human body arteries, the eye shell, the diaphragm, the skin and the pericardium are all shells as well. Shell Structures: Theory and Applications, Volume 4 contains 132 contributions presented at the 11th Conference on Shell Structures: Theory and Applications (Gdansk, Poland, 11-13 October 2017). The papers reflect a wide spectrum of scientific and engineering problems from theoretical modelling through strength, stability and dynamic behaviour, numerical analyses, biomechanic applications up to engineering design of shell structures. Shell Structures: Theory and Applications, Volume 4 will be of interest to academics, researchers, designers and engineers dealing with modelling and analyses of shell structures. It may also provide supplementary reading to graduate students in Civil, Mechanical, Naval and Aerospace Engineering.

Download or read book Advanced Problem in Mechanics III written by D. A. Indeitsev and published by Springer Nature. This book was released on 2023-08-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on original theories and approaches in the field of mechanics. It reports on both theoretical and applied researches, with a special emphasis on problems and solutions at the interfaces of mechanics and other research areas. The respective chapters highlight cutting-edge works fostering development in fields such as micro- and nanomechanics, material science, physics of solid states, molecular physics, astrophysics, and many others. Special attention has been given to outstanding research conducted by young scientists from all over the world. This book is based on the 49th edition of the international conference “Advanced Problems in Mechanics”, which was held on June 21-25, 2021, in St. Petersburg, Russia, and co-organized by The Peter the Great St. Petersburg Polytechnic University and the Institute for Problems in Mechanical Engineering of the Russian Academy of Sciences, under the patronage of the Russian Academy of Sciences. It provides researchers and graduate students with an extensive overview of the latest research and a source of inspiration for future developments and collaborations in mechanics and related fields.

Download or read book Robot Operating System ROS written by Anis Koubaa and published by Springer. This book was released on 2017-05-25 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume is a continuation of the successful first volume of this Springer book, and as well as addressing broader topics it puts a particular focus on unmanned aerial vehicles (UAVs) with Robot Operating System (ROS). Consisting of three types of chapters: tutorials, cases studies, and research papers, it provides comprehensive additional material on ROS and the aspects of developing robotics systems, algorithms, frameworks, and applications with ROS. ROS is being increasingly integrated in almost all kinds of robots and is becoming the de-facto standard for developing applications and systems for robotics. Although the research community is actively developing applications with ROS and extending its features, amount of literature references is not representative of the huge amount of work being done. The book includes 19 chapters organized into six parts: Part 1 presents the control of UAVs with ROS, while in Part 2, three chapters deal with control of mobile robots. Part 3 provides recent work toward integrating ROS with Internet, cloud and distributed systems. Part 4 offers five case studies of service robots and field experiments. Part 5 presents signal-processing tools for perception and sensing, and lastly, Part 6 introduces advanced simulation frameworks. The diversity of topics in the book makes it a unique and valuable reference resource for ROS users, researchers, learners and developers.

Download or read book Simulation of Manufacturing Sequences of Functionally Graded Structures written by Gleim, Tobias and published by kassel university press GmbH. This book was released on 2017-02-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current paper establishes an axisymmetric model for an inductive heating process. Therein, the fully coupled MAXWELL equations, assuming a temperature dependent permeability, are combined with the non-linear heat conduction equation to yield a monolithic solution strategy. The latter is based on a consistent linearization together with a higher order finite element discretization using GALERKIN'S method in space. For the temporal discretization, the generalized Newmark-? methods, higher order RUNGE-KUTTA methods, and discontinuous and continuous GALERKIN methods are used. Furthermore, the residual error is introduced to open an alternative way to obtain a numerically efficient estimation of the time integration accuracy. Simulation results of the electric, magnetic and thermal fields are provided, together with parameter studies concerning spatial discretization, frequency dependence and penetration depth of the heating zone. Another topic analyzed is the residual error and its estimation quality regarding polynomial degree and time step size. A further aspect of this work is the investigation of the thermal fluid-structure interaction with respect to functionally graded materials. Different coupling strategies for the acceleration of the fixed-point iteration in each time step is in the foreground. Relaxation methods as well as extrapolation methods make it possible to significantly reduce the number of fixed point iterations. At the same time, an adaptive strategy with higher order RUNGE-KUTTA methods can provide a further advantage in combination with acceleration methods.

Download or read book Mechatronics and Robotics Engineering for Advanced and Intelligent Manufacturing written by Dan Zhang and published by Springer. This book was released on 2016-08-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring selected contributions from the 2nd International Conference on Mechatronics and Robotics Engineering, held in Nice, France, February 18–19, 2016, this book introduces recent advances and state-of-the-art technologies in the field of advanced intelligent manufacturing. This systematic and carefully detailed collection provides a valuable reference source for mechanical engineering researchers who want to learn about the latest developments in advanced manufacturing and automation, readers from industry seeking potential solutions for their own applications, and those involved in the robotics and mechatronics industry.

Download or read book Archeologia e Calcolatori 30 2019 written by Marco Arizza and published by All’Insegna del Giglio. This book was released on 2019-11-28 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Il volume 30 di «Archeologia e Calcolatori» si apre con un inserto speciale, dedicato al trentennale della rivista. Alle introduzioni di F. Djindjian e di P. Moscati, che delineano un quadro dell’informatica archeologica nel suo divenire, seguono gli articoli dei membri del Comitato di Redazione, a testimoniare l’attività di ricerca e di sperimentazione che ha caratterizzato il cammino editoriale della rivista, e il contributo di una giovane laureata dell’Università Bocconi, che ha lavorato a stretto contatto con il team di «Archeologia e Calcolatori». Nella parte centrale sono pubblicati gli articoli proposti annualmente dagli autori. Ne emerge un quadro che rappresenta gli aspetti applicativi più qualificanti dell’informatica archeologica (le banche dati, i GIS, le analisi statistiche, i sistemi multimediali), ma che guarda oggi con sempre maggiore interesse agli strumenti di visualizzazione scientifica e di comunicazione delle conoscenze. Il volume si chiude con gli Atti del XII Workshop ArcheoFOSS (Free, Libre and Open Source Software e Open Format nei processi di ricerca archeologica), un’iniziativa lodevole, nata nel 2006, cui si è più volte dato spazio nelle pagine della rivista.

Download or read book Unconventional Computation and Natural Computation written by Cristian S. Calude and published by Springer. This book was released on 2015-08-07 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th International Conference on Unconventional Computation and Natural Computation, UCNC 2015, held in Auckland, New Zealand, in August/September 2015. The 16 revised full papers were carefully reviewed and selected from 38 submissions. The papers cover a wide range of topics including among others molecular (DNA) computing; quantum computing; optical computing; chaos computing; physarum computing; computation in hyperbolic spaces; collision-based computing; cellular automata; neural computation; evolutionary computation; swarm intelligence; nature-inspired algorithms; artificial immune systems; artificial life; membrane computing; amorphous computing; computational systems biology; genetic networks; protein-protein networks; transport networks; synthetic biology; cellular (in vivo) computing; and computations beyond the Turing model and philosophical aspects of computing.

Download or read book Software Engineering and Formal Methods written by Carlos Canal and published by Springer. This book was released on 2015-01-31 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the workshops collocated with the SEFM 2014 conference on Software Engineering and Formal Methods, held in Grenoble, France, in September 2014. The 26 papers included in this volume were carefully reviewed and selected from 49 submissions. They are from the following workshops: the 1st Workshop on Human-Oriented Formal Methods - From Readability to Automation, HOFM 2014, the 3rd International Symposium on Modelling and Knowledge Management Applications - Systems and Domains, MoKMaSD 2014, the 8th International Workshop on Foundations and Techniques for Open Source Software Certification, Open Cert 2014, the 1st Workshop on Safety and Formal Methods, SaFoMe 2014 and the 4th Workshop on Formal Methods in the Development of Software, WS-FMDS 2014.

Download or read book Information Technologies in Medicine written by Ewa Piętka and published by Springer. This book was released on 2016-05-27 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: ITiB’2016 is the 5th Conference on Information Technologies in Biomedicine organized by the Department of Informatics & Medical Equipment of Silesian University of Technology every other year. The Conference is under the auspices of the Committee on Biocybernetics and Biomedical Engineering of the Polish Academy of Sciences. The meeting has become a recognized event that helps to bridge the gap between methodological achievements in engineering and clinical requirements in medical diagnosis, therapy, and rehabilitation. Mathematical information analysis, computer applications together with medical equipment and instruments have become standard tools underpinning the current rapid progress with developing Computational Intelligence. Members of academic societies of technical and medical background present their research results and clinical implementations. This proceedings (divided in 2 volumes) include the following sections: ؠ Image Processing ؠ Signal Processing ؠ Medical Information System & Database ؠ Ambient Assisted Living ؠ Bioinformatics ؠ Modeling & Simulation ؠ Biomechatronics ؠ Biomaterials

Download or read book Biotic Stress Management of Crop Plants using Nanomaterials written by Krishna Kant Mishra and published by CRC Press. This book was released on 2023-05-18 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes nanotechnology-based agricultural research for crop productivity and the management of various plant pathogens. It deals with the application of nano-molecules for quick, cost-effective, and precise plant disease diagnostic procedures, plant pests and disease management, nano-pesticides, and nano-diagnostics. Further, it explains nanomaterials for biotic stress management, with an insight into the synthesis and modification of nanomaterials and their potential applications in different domains for disease management. Features include: Compilation of current research on the Nanomaterials as well as their versatile applications in plant biotic stress management Description of the role of nanomaterials as enzyme-mimicking nanoparticles, nano-pesticides, nano-fertilizers, and nanomaterials Review of day-to-day problems related to crop plants, their diagnostics, and stress management Exploration of trends in nanomaterial utility in diagnostics, enzyme-mimicking, and crop protection, and their possible role in plant disease management Study of pertinent nanomaterials including synthetic strategies, properties, chemistry, and applications This book is aimed at researchers and graduate students in plant pathology, genetic engineering, environmental science, botany, bioengineering, and nanotechnology.

Download or read book Security and Privacy Management Techniques and Protocols written by Maleh, Yassine and published by IGI Global. This book was released on 2018-04-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The security of information and communication technology is a high priority for any organization. By examining the current problems and challenges this domain is facing, more efficient strategies can be established to safeguard personal information against invasive pressures. Security and Privacy Management, Techniques, and Protocols is a critical scholarly resource that examines emerging protocols and methods for effective management of information security at organizations. Featuring coverage on a broad range of topics such as cryptography, secure routing protocols, and wireless security, this book is geared towards academicians, engineers, IT specialists, researchers, and students seeking current research on security and privacy management.