Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems written by and published by Allied Publishers. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials written by Ivan A. Parinov and published by Springer Nature. This book was released on 2020-06-16 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer-reviewed contributions from the 2019 International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 (Hanoi, Vietnam, 7–10 November, 2019), divided into four scientific themes: processing techniques, physics, mechanics, and applications of advanced materials. The book describes a broad spectrum of promising nanostructures, crystals, materials and composites with special properties. It presents nanotechnology approaches, modern environmentally friendly techniques and physical-chemical and mechanical studies of the structural-sensitive and physical–mechanical properties of materials. The obtained results are based on new achievements in material sciences and computational approaches, methods and algorithms (in particular, finite-element and finite-difference modeling) applied to the solution of different technological, mechanical and physical problems. The obtained results have a significant interest for theory, modeling and test of advanced materials. Other results are devoted to promising devices demonstrating high accuracy, longevity and new opportunities to work effectively under critical temperatures and high pressures, in aggressive media, etc. These devices demonstrate improved comparative characteristics, caused by developed materials and composites, allowing investigation of physio-mechanical processes and phenomena based on scientific and technological progress.
Download or read book Advances in Engineering Materials Structures and Systems Innovations Mechanics and Applications written by Alphose Zingoni and published by CRC Press. This book was released on 2019-08-21 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications comprises 411 papers that were presented at SEMC 2019, the Seventh International Conference on Structural Engineering, Mechanics and Computation, held in Cape Town, South Africa, from 2 to 4 September 2019. The subject matter reflects the broad scope of SEMC conferences, and covers a wide variety of engineering materials (both traditional and innovative) and many types of structures. The many topics featured in these Proceedings can be classified into six broad categories that deal with: (i) the mechanics of materials and fluids (elasticity, plasticity, flow through porous media, fluid dynamics, fracture, fatigue, damage, delamination, corrosion, bond, creep, shrinkage, etc); (ii) the mechanics of structures and systems (structural dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) the numerical modelling and experimental testing of materials and structures (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) innovations and special structures (nanostructures, adaptive structures, smart structures, composite structures, bio-inspired structures, shell structures, membranes, space structures, lightweight structures, long-span structures, tall buildings, wind turbines, etc); (v) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber, glass); (vi) the process of structural engineering (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, testing, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). The SEMC 2019 Proceedings will be of interest to civil, structural, mechanical, marine and aerospace engineers. Researchers, developers, practitioners and academics in these disciplines will find them useful. Two versions of the papers are available. Short versions, intended to be concise but self-contained summaries of the full papers, are in this printed book. The full versions of the papers are in the e-book.
Download or read book Construction Materials and Structures written by S.O. Ekolu and published by IOS Press. This book was released on 2014-12-05 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of these Proceedings contain about 200 conference papers and 10 keynote papers presented at the First International Conference on Construction Materials and Structures, held in Johannesburg, South Africa from 24 to 26 November 2014. It includes sections on Materials and characterization; Durability of construction materials; Structural implications, performance, service life; Sustainability, waste utilization, the environment; and Building science and construction.
Download or read book Advanced Materials Structures and Mechanical Engineering written by Mosbeh Kaloop and published by CRC Press. This book was released on 2016-04-14 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Advanced Materials, Structures and Mechanical Engineering 2015 (ICAMSME 2015) was held on May 29-31, Incheon, South-Korea. The conference was attended by scientists, scholars, engineers and students from universities, research institutes and industries all around the world to present ongoing research activities. This
Download or read book Adaptronics and Smart Structures written by Hartmut Janocha and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptronics is the term encompassing technical fields that have become known internationally under the names "smart materials", "intelligent structures", and "smart structures". Adaptronics contributes to the optimisation of systems and products. It bridges the gap between material and system or product, and incorporates the search for multi-functional materials and elements and their integration in systems or structures. The authors of this book have taken on the task of displaying the current state of the art in this fascinating field. The system components, actuators, sensors and controllers, technical fundamentals, materials, design rules and practical solutions are all described. Selected sample applications are also presented and current development trends are demonstrated.
Download or read book Fracture Mechanics of Concrete Structures written by Z.P. Bazant and published by CRC Press. This book was released on 2003-10-04 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference is the first in a series of conferences dedicated to Fracture Mechanics of Concrete Structures. Due to the recent explosion of interest in research on fracture in concrete, the conference has brought together the world's leading researchers in fracture of concrete and this book contains the proceedings.
Download or read book Composite Materials and Joining Technologies for Composites Volume 7 written by Eann Patterson and published by Springer Science & Business Media. This book was released on 2012-09-18 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials and the First International Symposium on Joining Technologies for Composites, Volume 7: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, Mechanics of Biological Systems and Materials and, MEMS and Nanotechnology.
Download or read book Mechanical Catalog written by and published by . This book was released on 1917 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1989 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensed Catalogues of Mechanical Equipment written by and published by . This book was released on 1919 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Structures and Materials XXIV written by Hong Hao and published by CRC Press. This book was released on 2019-08-08 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including: • Structural mechanics • Computational mechanics • Reinforced and prestressed concrete structures • Steel structures • Composite structures • Civil engineering materials • Fire engineering • Coastal and offshore structures • Dynamic analysis of structures • Structural health monitoring and damage identification • Structural reliability analysis and design • Structural optimization • Fracture and damage mechanics • Soil mechanics and foundation engineering • Pavement materials and technology • Shock and impact loading • Earthquake loading • Traffic and other man-made loadings • Wave and wind loading • Thermal effects • Design codes Mechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1993 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCS20 20th International Conference on Composite Structures written by Nicholas Fantuzzi and published by Società Editrice Esculapio. This book was released on 2017-07-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials have aroused a great interest over the last few decades, as proven by the huge number of scientific papers and industrial progress. The increase in the use of composite structures in different engineering practices justify the present international meeting where researches from every part of the globe can share and discuss the recent advancements regarding the use of structural components within advanced applications such as buckling, vibrations, repair, reinforcements, concrete, composite laminated materials and more recent metamaterials. Studies about composite structures are truly multidisciplinary and the given contributions can help other researches and professional engineers in their own field. This Conference is suitable as a reference for engineers and scientists working in the professional field, in the industry and the academia and it gives the possibility to share recent advancements in different engineering practices to the outside world. This book aims to collect selected plenary and key-note lectures of this International Conference. For this reason, the establishment of this 20th edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have filled many sessions during this conference. As a proof of this event, which has taken place in Paris (France), selected plenary and key-note lectures have been collected in the present book.
Download or read book Transactions of the American Society of Mechanical Engineers written by American Society of Mechanical Engineers and published by . This book was released on 1924 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. 2, 4-11, 62-68 include the Society's Membership list; v. 55-80 include the Journal of applied mechanics (also issued separately) as contributions from the Society's Applied Mechanics Division.
Download or read book Flight vehicle Materials Structures and Dynamics assessment and Future Directions Tribological materials and NDE written by and published by . This book was released on 1992 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
