Download or read book Proceedings of the International Conference on Aerospace System Science and Engineering 2021 written by Zhongliang Jing and published by Springer Nature. This book was released on 2022-07-08 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book collects selected papers presented at the 5th International Conference on Aerospace System Science and Engineering (ICASSE 2021), organized by Shanghai Jiao Tong University, China, hosted by Moscow Aviation Institute, Russia. It provides a forum for experts in aeronautics and astronautics to share new ideas and findings. ICASSE conference has been organized annually since 2017 and host in Shanghai, Moscow, and Toronto in turn, where the three regional editors of journal Aerospace Systems are located. This book presents high-quality contributions in the subject area of Aerospace System Science and Engineering, including topics such as: Trans-space vehicle systems design and integration, Air vehicle systems, Space vehicle systems, Near-space vehicle systems, Opto-electronic system, Aerospace robotics and unmanned system, Aerospace robotics and unmanned system, Communication, navigation and surveillance, Dynamics and control, Intelligent sensing and Information fusion, Aerodynamics and aircraft design, Aerospace propulsion, Avionics system, Air traffic management, Earth observation, Deep space exploration, Bionic micro-aircraft/spacecraft.
Download or read book Proceedings of the International Conference on Aerospace System Science and Engineering 2020 written by Zhongliang Jing and published by Springer Nature. This book was released on 2021-06-01 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality contributions in the subject area of Aerospace System Science and Engineering, including topics such as: Trans-space vehicle systems design and integration, Air vehicle systems, Space vehicle systems, Near-space vehicle systems, Opto-electronic system, Aerospace robotics and unmanned system, Aerospace robotics and unmanned system, Communication, navigation, and surveillance, Dynamics and control, Intelligent sensing and information fusion, Aerodynamics and aircraft design, Aerospace propulsion, Avionics system, Air traffic management, Earth observation, Deep space exploration, and Bionic micro-aircraft/spacecraft. The book collects selected papers presented at the 4th International Conference on Aerospace System Science and Engineering (ICASSE 2020), organized by Shanghai Jiao Tong University, China, held on 14–16 July 2020 as virtual event due to COVID-19. It provides a forum for experts in aeronautics and astronautics to share new ideas and findings. ICASSE conferences have been organized annually since 2017 and hosted in Shanghai, Moscow, and Toronto in turn, where the three regional editors of the journal Aerospace Systems are located.
Download or read book Proceedings of the International Conference on Aerospace System Science and Engineering 2022 written by Zhongliang Jing and published by Springer Nature. This book was released on 2023-02-25 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book collects selected papers presented at the 6th International Conference on Aerospace System Science and Engineering (ICASSE 2022), organized by Shanghai Jiao Tong University, China, and hosted by University of Toronto, Canada in July 2022. It provides a forum for experts in aeronautics and astronautics to share new ideas and findings. ICASSE conference has been organized annually since 2017 and host in Shanghai, Moscow, and Toronto in turn, where the three regional editors of journal Aerospace Systems are located. This book presents high-quality contributions in the subject area of Aerospace System Science and Engineering, including topics such as: Trans-space vehicle systems design and integration, Air vehicle systems, Space vehicle systems, Near-space vehicle systems, Opto-electronic system, Aerospace robotics and unmanned system, Aerospace robotics and unmanned system, Communication, navigation and surveillance, Dynamics and control, Intelligent sensing and Information fusion, Aerodynamics and aircraft design, Aerospace propulsion, Avionics system, Air traffic management, Earth observation, Deep space exploration, Bionic micro-aircraft/spacecraft.
Download or read book Circular Economy in Engineering Design and Production written by Samira Keivanpour and published by Springer Nature. This book was released on 2023-12-10 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise text provides the concepts, methods, and application examples for integrating sustainability into engineering design and production. It discusses the role of sustainability in the value creation processes of various enterprises and different tools and methods for systematic incorporation of social and environmental aspects into the product's life cycle. The following topics are covered: sustainable development in engineering systems and the life cycle concept, norms and standards in the sustainable development and integration of socio-economic assessment into technical valuation, production systems, management of the production systems based on circular economy principles, ecodesign practices, and value creation and innovative design in the circular economy. Provides a concise guide for engineering students for applying circular economy practices Presents examples and short case studies for understanding the methods and tools Facilitates understanding and application of the life cycle perspective in product manufacturing and green engineering
Download or read book Deterministic and Stochastic Approaches in Computer Modeling and Simulation written by Romansky, Radi Petrov and published by IGI Global. This book was released on 2023-10-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of computer modeling and simulation, academic scholars face a pressing challenge—how to navigate the complex landscape of both deterministic and stochastic approaches to modeling. This multifaceted arena demands a unified organizational framework, a comprehensive guide that can seamlessly bridge the gap between theory and practical application. Without such a resource, scholars may struggle to harness the full potential of computer modeling, leaving critical questions unanswered and innovative solutions undiscovered. Deterministic and Stochastic Approaches in Computer Modeling and Simulation serves as the definitive solution to the complex problem scholars encounter. By presenting a comprehensive and unified organizational approach, this book empowers academics to conquer the challenges of computer modeling with confidence. It not only provides a classification of modeling methods but also offers a formalized, step-by-step approach to conducting model investigations, starting from defining objectives to analyzing experimental results. For academic scholars seeking a holistic understanding of computer modeling, this book is the ultimate solution. It caters to the diverse needs of scholars by addressing both deterministic and stochastic approaches. Through its structured chapters, it guides readers from the very basics of computer systems investigation to advanced topics like stochastic analytical modeling and statistical modeling.
Download or read book Intelligent Sustainable Systems written by Atulya K. Nagar and published by Springer Nature. This book was released on with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Proceedings of the 2024 Conference on Systems Engineering Research written by Alejandro Salado and published by Springer Nature. This book was released on with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyber Physical Systems Intelligent Models and Algorithms written by Alla G. Kravets and published by Springer Nature. This book was released on 2022-03-29 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to intelligent models and algorithms as the core components of cyber-physical systems. The complexity of cyber-physical systems developing and deploying requires new approaches to its modelling and design. Presents results in the field of modelling technologies that leverage the exploitation of artificial intelligence, including artificial general intelligence (AGI) and weak artificial intelligence. Provides scientific, practical, and methodological approaches based on bio-inspired methods, fuzzy models and algorithms, predictive modelling, computer vision and image processing. The target audience of the book are practitioners, enterprises representatives, scientists, PhD and Master students who perform scientific research or applications of intelligent models and algorithms in cyber-physical systems for various domains.
Download or read book Recent Advancements in Multi View Data Analytics written by Witold Pedrycz and published by Springer Nature. This book was released on 2022-05-20 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides timely studies on multi-view facets of data analytics by covering recent trends in processing and reasoning about data originating from an array of local sources. A multi-view nature of data analytics is encountered when working with a variety of real-world scenarios including clustering, consensus building in decision processes, computer vision, knowledge representation, big data, data streaming, among others. The chapters demonstrate recent pursuits in the methodology, theory, advanced algorithms, and applications of multi-view data analytics and bring new perspectives of data interpretation. The timely book will appeal to a broad readership including both researchers and practitioners interested in gaining exposure to the rapidly growing trend of multi-view data analytics and intelligent systems.
Download or read book Artificial Intelligence Approaches to Sustainable Accounting written by Tavares, Maria C. and published by IGI Global. This book was released on 2024-04-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an age defined by unparalleled technological advancements, globalization, and the looming specter of environmental and societal crises, the need for a holistic and sustainable approach to accounting practices has never been more pressing. Academic scholars stand witness to the challenges posed by the new era, characterized by transformative shifts across industry, education, community, and society at large. These shifts, driven by rapid advancements in Artificial Intelligence (AI), present a double-edged sword. While AI offers unprecedented opportunities for innovation, it also amplifies the urgency of addressing sustainability concerns. Today's society grapples with the immense responsibility of achieving the Sustainable Development Goals (SDGs) outlined in Agenda 2030. It is imperative to not only understand but harness the power of AI to drive sustainability, enhance the quality of life, and ensure sustainable growth on both local and global scales. Artificial Intelligence Approaches to Sustainable Accounting serves as a beacon of knowledge, providing a comprehensive exploration of the intersection between AI, accounting, and sustainability. This book represents a vital solution to the challenges faced by academic scholars and practitioners alike. Within its pages lies a transdisciplinary approach that bridges the gap between these critical fields. Discover how AI can elevate accounting to new heights, extending the spectrum of information in organizational decision-making, promoting responsible reporting practices, and bolstering sustainable practices worldwide. This book not only reviews governance and management processes but also offers practical methodologies that empower organizations to embrace sustainability wholeheartedly.
Download or read book Advances in Maritime Technology and Engineering written by Carlos Guedes Soares and published by CRC Press. This book was released on 2024-05-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Maritime Technology and Engineering comprises a collection of the papers presented at the 7th International Conference on Maritime Technology and Engineering (MARTECH 2024) held in Lisbon, Portugal, on 14-16 May 2024. This Conference has evolved from the series of biannual national conferences in Portugal, which have become an international event, reflecting the internationalization of the maritime sector and its activities. MARTECH 2024 is the seventh of this new series of biannual conferences. This book comprises 142 contributions that were reviewed by an International Scientific Committee. Advances in Maritime Technology and Engineering is dedicated to maritime transportation, ports as well as maritime safety and reliability. It further comprises sections dedicated to ship design, cruise ship design, and to the structural aspects of ship design, such as ultimate strength and composites, subsea structures as pipelines, and to ship building and ship repair. The Proceedings in Marine Technology and Ocean Engineering series is dedicated to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of “Marine Technology and Ocean Engineering”. The series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The “Marine Technology and Ocean Engineering” series is also open to new conferences that cover topics on the sustainable exploration of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and is resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.
Download or read book Computer Vision ACCV 2020 written by Hiroshi Ishikawa and published by Springer Nature. This book was released on 2021-02-25 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six volume set of LNCS 12622-12627 constitutes the proceedings of the 15th Asian Conference on Computer Vision, ACCV 2020, held in Kyoto, Japan, in November/ December 2020.* The total of 254 contributions was carefully reviewed and selected from 768 submissions during two rounds of reviewing and improvement. The papers focus on the following topics: Part I: 3D computer vision; segmentation and grouping Part II: low-level vision, image processing; motion and tracking Part III: recognition and detection; optimization, statistical methods, and learning; robot vision Part IV: deep learning for computer vision, generative models for computer vision Part V: face, pose, action, and gesture; video analysis and event recognition; biomedical image analysis Part VI: applications of computer vision; vision for X; datasets and performance analysis *The conference was held virtually.
Download or read book Proceedings of 2nd International Conference on Mathematical Modeling and Computational Science written by Sheng-Lung Peng and published by Springer Nature. This book was released on 2022-06-28 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference proceeding of ICMMCS 2021 presents most recent scientific and technological advances in the fields of engineering mathematics and computational science to strengthen the links in the scientific community. It is a collection of high-quality, peer-reviewed research papers presented at the Second International Conference on Mathematical Modeling and Computational Science (ICMMCS 2021), held online during October 29–30, 2021. The topics covered in the book are mathematical logic and foundations, numerical analysis, neural networks, fuzzy set theory, coding theory, higher algebra, number theory, graph theory and combinatory, computation in complex networks, calculus, differential educations and integration, application of soft computing, knowledge engineering, machine learning, artificial intelligence, big data and data analytics, high-performance computing, network and device security, Internet of Things (IoT).
Download or read book Reshaping Intelligent Business and Industry written by Surjeet Dalal and published by John Wiley & Sons. This book was released on 2024-09-06 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The convergence of Artif icial Intelligence (AI) and Internet of Things (IoT) is reshaping the way industries, businesses, and economies function; the 34 chapters in this collection show how the full potential of these technologies is being enabled to create intelligent machines that simulate smart behavior and support decision-making with little or no human interference, thereby providing startling organizational efficiencies. Readers will discover that in Reshaping Intelligent Business and Industry: The book unpacks the two superpowers of innovation, AI and IoT, and explains how they connect to better communicate and exchange information about online activities; How the center and the network's edge generate predictive analytics or anomaly alerts; The meaning of AI at the edge and IoT networks. How bandwidth is reduced and privacy and security are enhanced; How AI applications increase operating efficiency, spawn new products and services, and enhance risk management; How AI and IoT create 'intelligent' devices and how new AI technology enables IoT to reach its full potential; Analyzes AIOT platforms and the handling of personal information for shared frameworks that remain sensitive to customers’ privacy while effectively utilizing data. Audience This book will appeal to all business and organization leaders, entrepreneurs, policymakers, and economists, as well as scientists, engineers, and students working in artificial intelligence, software engineering, and information technology.
Download or read book Hybrid Information Systems written by Ramakant Bhardwaj and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-07-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides comprehensive and cognitive approach to building and deploying sophisticated information systems. The book utilizes non-linear optimization techniques, fuzzy logic, and rough sets to model various real-world use cases for the digital era. The hybrid information system modeling handles both qualitative and quantitative data and can effectively handle uncertainty and imprecision in the data. The combination of non-linear optimization mechanisms, fuzzy logic, and rough sets provides a robust foundation for next-generation information systems that can fulfill the demands of adaptive, aware, and adroit software applications for the knowledge era. The book emphasizes the importance of the hybrid approach, which combines the strengths of both mathematical and AI techniques, to achieve a more comprehensive and effective modeling process. Hybrid information system modeling techniques combine different approaches, such as fuzzy logic, rough sets, and neural networks, to create models that can handle the complexity and uncertainty of real-world problems. These techniques provide a powerful tool for modeling and analyzing complex systems, and the applications of hybrid information system modeling demonstrate their potential for solving real-world problems in various fields.
Download or read book Real Time Systems written by Hermann Kopetz and published by Springer Nature. This book was released on 2022-09-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is a comprehensive text for the design of safety critical, hard real-time embedded systems. It offers a splendid example for the balanced, integrated treatment of systems and software engineering, helping readers tackle the hardest problems of advanced real-time system design, such as determinism, compositionality, timing and fault management. This book is an essential reading for advanced undergraduates and graduate students in a wide range of disciplines impacted by embedded computing and software. Its conceptual clarity, the style of explanations and the examples make the abstract concepts accessible for a wide audience." Janos Sztipanovits, Director E. Bronson Ingram Distinguished Professor of Engineering Institute for Software Integrated Systems Vanderbilt University Real-Time Systems focuses on hard real-time systems, which are computing systems that must meet their temporal specification in all anticipated load and fault scenarios. The book stresses the system aspects of distributed real-time applications, treating the issues of real-time, distribution and fault-tolerance from an integral point of view. A unique cross-fertilization of ideas and concepts between the academic and industrial worlds has led to the inclusion of many insightful examples from industry to explain the fundamental scientific concepts in a real-world setting. Compared to the Second Edition, new developments in communication standards for time-sensitive networks, such as TSN and Time-Triggered Ethernet are addressed. Furthermore, this edition includes a new chapter on real-time aspects in cloud and fog computing. The book is written as a standard textbook for a high-level undergraduate or graduate course on real-time embedded systems or cyber-physical systems. Its practical approach to solving real-time problems, along with numerous summary exercises, makes it an excellent choice for researchers and practitioners alike.
Download or read book Spatial Grasp as a Model for Space based Control and Management Systems written by Peter Simon Sapaty and published by CRC Press. This book was released on 2022-06-23 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Governmental agencies and private companies of different countries are actively moving into space around Earth with the aim to provide smart communication and industry, security, and defense solutions. This often involves massive launches of small, cheap satellites in low earth orbits, which is also contributing to the growth of space debris. The book offers a high-level holistic system philosophy, model, and technology that can effectively organize distributed space-based systems, starting with their planning, creation, and growth. The Spatial Grasp Technology described in the book, based on parallel navigation and pattern-matching of distributed environments with high-level recursive mobile code, can effectively provide any networking protocols and important system applications, by integrating and tasking available terrestrial and celestial equipment. This book contains practical examples of technology-based solutions for tracing hypersonic gliders, continuing observation of certain objects and infrastructures on Earth from space, space-based command and control of large distributed systems, as well as collective removal of increasing amounts of space junk. Earlier versions of this technology were prototyped and used in different countries, with the current version capable of being quickly implemented in traditional industrial or even university environments. This book is oriented toward system scientists, application programmers, industry managers, and university students interested in advanced MSc and PhD projects related to space conquest and distributed system management. Dr Peter Simon Sapaty, Chief Research Scientist, Ukrainian Academy of Sciences, has worked with networked systems for five decades. Outside of Ukraine, he has worked in the former Czechoslovakia (now Czech Republic and Slovakia), Germany, the UK, Canada, and Japan as a group leader, Alexander von Humboldt researcher, and invited and visiting professor. He launched and chaired the Special Interest Group (SIG) on Mobile Cooperative Technologies in Distributed Interactive Simulation project in the United States, and invented a distributed control technology that resulted in a European patent and books with Wiley, Springer, and Emerald. He has published more than 250 papers on distributed systems and has been included in the Marquis Who’s Who in the World and Cambridge Outstanding Intellectuals of the 21st Century. Peter also works with several international scientific journals.
