Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2019 written by Gheorghe Ion Gheorghe and published by Springer. This book was released on 2019-07-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather contributions presented at the 3rd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 5th–6th, 2019. Reflecting the expansion mechatronics, it discusses topics in the newer trans-disciplinary fields, such as adaptronics, integronics, and cyber-mixmechatronics. With a rich scientific tradition and attracting specialists from around the globe – including North America, South America, and Asia – ICOMECYME focuses on presenting the latest research. It is mainly directed at academics and advanced students, but also appeals to R&D experts, offering a platform for scientific exchange. These proceedings are a valuable resource for entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2019 written by Gheorghe I. Gheorghe and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather contributions presented at the 3rd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 5th-6th, 2019. Reflecting the expansion mechatronics, it discusses topics in the newer trans-disciplinary fields, such as adaptronics, integronics, and cyber-mixmechatronics. With a rich scientific tradition and attracting specialists from around the globe - including North America, South America, and Asia - ICOMECYME focuses on presenting the latest research. It is mainly directed at academics and advanced students, but also appeals to R&D experts, offering a platform for scientific exchange. These proceedings are a valuable resource for entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2018 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2018-07-17 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book gathers contributions presented at the 2nd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 6th–7th, 2018. Further, it reflect the expansion of the field of Mechatronics, which has yielded newer trans-disciplinary fields including Adaptronics, Integronics, and Cyber-Mix-Mechatronics. These are also the topics addressed by the respective book chapters. The conference has a rich scientific tradition and attracts specialists from all over the world – including North America, South America, and Asia. ICOMECYME is focused on presenting research results and is mainly directed at academics and advanced students, but also offers a venue for interacting with R&D experts. These proceedings will especially benefit entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2020 written by Gheorghe Ion Gheorghe and published by Springer Nature. This book was released on 2020-07-17 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research in the field of mechatronics and cyber-mixmechatronics, gathering papers from almost all continents. Featuring contributions by research scholars in both government-financed institutions and in the business environment, it offers a clear picture of the innovations emerging in the field. The book is not limited to mechatronics, but also covers all the smart technical sciences, and discusses promising medical applications based on nanotechnologies. As such, it is a valuable resource for students wanting to learn from leading scholars, as well as for researchers in all areas of engineering.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2017 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2017-08-07 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.
Download or read book Deep Learning Model Optimization Deployment and Improvement Techniques for Edge native Applications written by Pethuru Raj and published by Cambridge Scholars Publishing. This book was released on 2024-08-22 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The edge AI implementation technologies are fast maturing and stabilizing. Edge AI digitally transforms retail, manufacturing, healthcare, financial services, transportation, telecommunication, and energy. The transformative potential of Edge AI, a pivotal force in driving the evolution from Industry 4.0’s smart manufacturing and automation to Industry 5.0’s human-centric, sustainable innovation. The exploration of the cutting-edge technologies, tools, and applications that enable real-time data processing and intelligent decision-making at the network’s edge, addressing the increasing demand for efficiency, resilience, and personalization in industrial systems. Our book aims to provide readers with a comprehensive understanding of how Edge AI integrates with existing infrastructures, enhances operational capabilities, and fosters a symbiotic relationship between human expertise and machine intelligence. Through detailed case studies, technical insights, and practical guidelines, this book serves as an essential resource for professionals, researchers, and enthusiasts poised to harness the full potential of Edge AI in the rapidly advancing industrial landscape.
Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Download or read book Modelling and Optimization of Wave Energy Converters written by Dezhi Ning and published by CRC Press. This book was released on 2022-07-28 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave energy offers a promising renewable energy source, however, technologies converting wave energy into useful electricity face many design challenges. This guide presents numerical modelling and optimization methods for the development of wave energy converter technologies, from principles to applications. It covers the development status and perspectives of wave energy converter systems; the fundamental theories on wave power absorption; the modern wave energy converter concepts including oscillating bodies in single and multiple degree of freedom and oscillating water column technologies; and the relatively hitherto unexplored topic of wave energy harvesting farms. It can be used as a specialist student textbook as well as a reference book for the design of wave energy harvesting systems, across a broad range of disciplines, including renewable energy, marine engineering, infrastructure engineering, hydrodynamics, ocean science, and mechatronics engineering. The Open Access version of this book, available at www.routledge.com has been made available under a Creative Commons Attribution-Non Commercial-No Derivatives 4.0 license.
Download or read book Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020 written by Khalid Isa and published by Springer Nature. This book was released on 2021-09-24 with total page 1155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 12th National Technical Symposium on Unmanned System Technology 2020 (NUSYS’20) held on October 27–28, 2020. It covers a number of topics, including intelligent robotics, novel sensor technology, control algorithms, acoustics signal processing, imaging techniques, biomimetic robots, green energy sources, and underwater communication backbones and protocols, and it appeals to researchers developing marine technology solutions and policy-makers interested in technologies to facilitate the exploration of coastal and oceanic regions.
Download or read book New Technologies Development and Application IV written by Isak Karabegović and published by Springer Nature. This book was released on 2021-05-11 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development, and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on June 24–26, 2021. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems; smart grids; nonlinear systems; power, social and economic systems; education; and IoT. The book New Technologies, Development and Application III is oriented toward Fourth Industrial Revolution “Industry 4.0, ”implementation which improves many aspects of human life in all segments and leads to changes in business paradigms and production models. Further, new business methods are emerging and transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book International Conference on Reliable Systems Engineering ICoRSE 2024 written by Daniela Doina Cioboată and published by Springer Nature. This book was released on with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Advances in Computational Mechanics and Simulations written by Sandip Kumar Saha and published by Springer Nature. This book was released on 2020-11-13 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from the 7th International Congress on Computational Mechanics and Simulation held at IIT Mandi, India. The papers discuss the development of mathematical models representing physical phenomena and applying modern computing methods and simulations to analyse them. The studies cover recent advances in the fields of nano mechanics and biomechanics, simulations of multiscale and multiphysics problems, developments in solid mechanics and finite element method, advancements in computational fluid dynamics and transport phenomena, and applications of computational mechanics and techniques in emerging areas. The volume will be of interest to researchers and academics from civil engineering, mechanical engineering, aerospace engineering, materials engineering/science, physics, mathematics and other disciplines.
Download or read book Product Lifecycle Management Green and Blue Technologies to Support Smart and Sustainable Organizations written by Osiris Canciglieri Junior and published by Springer Nature. This book was released on 2022-02-08 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 639 and 640 constitutes the refereed post-conference proceedings of the 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, held in Curitiba, Brazil, during July 11-14, 2021. The conference was held virtually due to the COVID-19 crisis. The 107 revised full papers presented in these proceedings were carefully reviewed and selected from 133 submissions. The papers are organized in the following topical sections: Volume I: Sustainability, sustainable development and circular economy; sustainability and information technologies and services; green and blue technologies; AI and blockchain integration with enterprise applications; PLM maturity, PLM implementation and adoption within industry 4.0; and industry 4.0 and emerging technologies: Volume II: Design, education and management; lean, design and innovation technologies; information technology models and design; and models, manufacturing and information technologies and services.
Download or read book ICMRE 2019 written by and published by . This book was released on 2019 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Future Mechatronics and Automation written by Guohui Yang and published by CRC Press. This book was released on 2015-02-28 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains selected papers presented at the 2014 International Conference on Future Mechatronics and Automation, held in Beijing, China. Contributions cover the latest developments and advances in the field of Mechatronics and Automation.
Download or read book Proceedings of the 2019 International Conference on Mechatronics Robotics and Systems Engineering MoRSE written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Seventh Asia International Symposium on Mechatronics written by Baoyan Duan and published by Springer Nature. This book was released on 2019-08-30 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents high-quality papers from the Seventh Asia International Symposium on Mechatronics (AISM 2019). It discusses the latest technological trends and advances in electromechanical coupling and environmental adaptability design for electronic equipment, sensing and measurement, mechatronics in manufacturing and automation, micro-mechatronics, energy harvesting & storage, robotics, automation and control systems. It includes papers based on original theoretical, practical and experimental simulations, development, applications, measurements, and testing. The applications and solutions discussed here provide excellent reference material for future product developments.