Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2017 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2017-08-07 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics. The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th–8th, 2017 and attracted specialists from all over the world—including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2018 written by Gheorghe I. Gheorghe and published by Springer. This book was released on 2018-07-17 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book gathers contributions presented at the 2nd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 6th–7th, 2018. Further, it reflect the expansion of the field of Mechatronics, which has yielded newer trans-disciplinary fields including Adaptronics, Integronics, and Cyber-Mix-Mechatronics. These are also the topics addressed by the respective book chapters. The conference has a rich scientific tradition and attracts specialists from all over the world – including North America, South America, and Asia. ICOMECYME is focused on presenting research results and is mainly directed at academics and advanced students, but also offers a venue for interacting with R&D experts. These proceedings will especially benefit entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2019 written by Gheorghe Ion Gheorghe and published by Springer. This book was released on 2019-07-19 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather contributions presented at the 3rd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 5th–6th, 2019. Reflecting the expansion mechatronics, it discusses topics in the newer trans-disciplinary fields, such as adaptronics, integronics, and cyber-mixmechatronics. With a rich scientific tradition and attracting specialists from around the globe – including North America, South America, and Asia – ICOMECYME focuses on presenting the latest research. It is mainly directed at academics and advanced students, but also appeals to R&D experts, offering a platform for scientific exchange. These proceedings are a valuable resource for entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2020 written by Gheorghe Ion Gheorghe and published by Springer Nature. This book was released on 2020-07-17 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research in the field of mechatronics and cyber-mixmechatronics, gathering papers from almost all continents. Featuring contributions by research scholars in both government-financed institutions and in the business environment, it offers a clear picture of the innovations emerging in the field. The book is not limited to mechatronics, but also covers all the smart technical sciences, and discusses promising medical applications based on nanotechnologies. As such, it is a valuable resource for students wanting to learn from leading scholars, as well as for researchers in all areas of engineering.
Download or read book Proceedings of the International Conference of Mechatronics and Cyber MixMechatronics 2019 written by Gheorghe I. Gheorghe and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings gather contributions presented at the 3rd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 5th-6th, 2019. Reflecting the expansion mechatronics, it discusses topics in the newer trans-disciplinary fields, such as adaptronics, integronics, and cyber-mixmechatronics. With a rich scientific tradition and attracting specialists from around the globe - including North America, South America, and Asia - ICOMECYME focuses on presenting the latest research. It is mainly directed at academics and advanced students, but also appeals to R&D experts, offering a platform for scientific exchange. These proceedings are a valuable resource for entrepreneurs who want to invest in research and who are open for collaborations.
Download or read book Oil and Gas Pipeline Infrastructure Insecurity written by Abdul L. Abraham Jatto and published by Springer Nature. This book was released on with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 3rd International Conference on Mechatronics and Robotics Engineering written by Dan Zhang and published by . This book was released on 2017-02-08 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: 2017 3rd International Conference on Mechatronics and Robotics Engineering Feb 08, 2017-Feb 12, 2017 Paris, France. You can view more information about this proceeding and all of ACM�s other published conference proceedings from the ACM Digital Library: http://www.acm.org/dl.
Download or read book Advanced Manufacturing Processes written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2020-03-27 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely yet comprehensive snapshot of innovative research and developments in the area of manufacturing. It covers a wide range of manufacturing processes, such as cutting, coatings, and grinding, highlighting the advantages provided by the use of new materials and composites, as well as new methods and technologies. It discusses topics in energy generation and pollution prevention. It shows how computational methods and mathematical models have been applied to solve a number of issues in both theoretical and applied research. Based on selected papers presented at the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), held in Odessa, Ukraine on September 10-13, 2019, this book offers a timely overview and extensive information on trends and technologies in the area of manufacturing, mechanical and materials engineering. It is also intended to facilitate communication and collaboration between different groups working on similar topics, and to offer a bridge between academic and industrial researchers.
Download or read book Modelling and Optimization of Wave Energy Converters written by Dezhi Ning and published by CRC Press. This book was released on 2022-07-28 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave energy offers a promising renewable energy source, however, technologies converting wave energy into useful electricity face many design challenges. This guide presents numerical modelling and optimization methods for the development of wave energy converter technologies, from principles to applications. It covers the development status and perspectives of wave energy converter systems; the fundamental theories on wave power absorption; the modern wave energy converter concepts including oscillating bodies in single and multiple degree of freedom and oscillating water column technologies; and the relatively hitherto unexplored topic of wave energy harvesting farms. It can be used as a specialist student textbook as well as a reference book for the design of wave energy harvesting systems, across a broad range of disciplines, including renewable energy, marine engineering, infrastructure engineering, hydrodynamics, ocean science, and mechatronics engineering. The Open Access version of this book, available at www.routledge.com has been made available under a Creative Commons Attribution-Non Commercial-No Derivatives 4.0 license.
Download or read book Recent Developments in Mechatronics and Intelligent Robotics written by Feng Qiao and published by Springer. This book was released on 2017-11-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the Proceedings of the International Conference on Mechatronics and Intelligent Robotics (ICMIR2017), held in Kunming, China, on May 20–21, 2017. The book covers a total of 172 papers, which have been divided into seven different sections: Intelligent Systems, Intelligent Sensors & Actuators, Robotics, Mechatronics, Modeling & Simulation, Automation & Control, and Robot Vision. ICMIR2017 provided a vital forum for discussing the latest and most innovative ideas from both the industrial and academic worlds, and for sharing best practices in the fields of mechanical engineering, mechatronics, automatic control, electrical engineering, finite element analysis and computational engineering. The main focus of the conference was on promoting interaction between academia and industry, allowing the free exchange of ideas and challenges faced by these two key stakeholders and encouraging future collaboration between the members of these groups. The proceedings cover new findings in the following areas of research and will offer readers valuable insights: Mechatronics Intelligent mechatronics, robotics and biomimetics; Novel and unconventional mechatronic systems; Modeling and control of mechatronics systems; Elements, structures and mechanisms of micro and nano systems; Sensors, wireless sensor networks and multi-sensor data fusion; Biomedical and rehabilitation engineering, prosthetics and artificial organs; Artificial Intelligence (AI), neural networks and fuzzy logic in mechatronics and robotics; Industrial automation, process control and networked control systems; Telerobotics, Human–Computer Interaction; and Human–Robot Interaction. Robotics Artificial Intelligence; Bio-inspired robotics; Control algorithms and control systems; Design theories and principles; Evolutional robotics; Field robotics; Force sensors, accelerometers, and other measuring devices; Healthcare robotics; Human–Robot Interaction; Kinematics and dynamics analysis; Manufacturing robotics; Mathematical and computational methodologies in robotics; Medical robotics; Parallel robots and manipulators; Robotic cognition and emotion; Robotic perception and decisions; Sensor integration, fusion, and perception; and Social robotics.
Download or read book New Technologies Development and Application IV written by Isak Karabegović and published by Springer Nature. This book was released on 2021-05-11 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features papers focusing on the implementation of new and future technologies, which were presented at the International Conference on New Technologies, Development, and Application, held at the Academy of Science and Arts of Bosnia and Herzegovina in Sarajevo on June 24–26, 2021. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control, energy, renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems; smart grids; nonlinear systems; power, social and economic systems; education; and IoT. The book New Technologies, Development and Application III is oriented toward Fourth Industrial Revolution “Industry 4.0, ”implementation which improves many aspects of human life in all segments and leads to changes in business paradigms and production models. Further, new business methods are emerging and transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book Recent Advances in Computational Mechanics and Simulations written by Sandip Kumar Saha and published by Springer Nature. This book was released on 2020-11-13 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents selected papers from the 7th International Congress on Computational Mechanics and Simulation held at IIT Mandi, India. The papers discuss the development of mathematical models representing physical phenomena and applying modern computing methods and simulations to analyse them. The studies cover recent advances in the fields of nano mechanics and biomechanics, simulations of multiscale and multiphysics problems, developments in solid mechanics and finite element method, advancements in computational fluid dynamics and transport phenomena, and applications of computational mechanics and techniques in emerging areas. The volume will be of interest to researchers and academics from civil engineering, mechanical engineering, aerospace engineering, materials engineering/science, physics, mathematics and other disciplines.
Download or read book 2017 International Conference on Mechatronics Electronics and Automotive Engineering written by and published by . This book was released on 2017 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ICMEAE provides a forum to showcase and establish the current state of the art, new research results, perspectives of future developments, and innovative applications relevant to electronics, mechatronics, robotics, control, computer science, and related areas The Conference will bring together, on a common platform, researchers, academicians, application engineers, technicias, businessmen, researchers, students and anyone who might be interested in the conference title to take part of the event.
Download or read book 2018 International Conference on Advanced Mechatronic Systems ICAMechS written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Conference on Reliable Systems Engineering ICoRSE 2023 written by Daniela Doina Cioboată and published by Springer Nature. This book was released on 2023-09-04 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises state-of-the-art research results in the field of mechatronics and other closely related areas and that will be presented on occasion of the third “International Conference of Reliable Systems Engineering (ICoRSE 2023)” that will take place in Bucharest, Romania, between 07–08 September 2023. The first two ICoRSE editions brought together professors, Ph.D. students, and researchers in Europe, North America, and Asia, in countries such as: England, Albania, Austria, Bulgaria, Canada, Czech Republic, Germany, France, Italy, Portugal, Turkey, Ukraine, Uzbekistan, and Vietnam. In this year’s edition of the conference, we have benefitted from the inclusion in the scientific committee of the conference of professors in all of these countries, and we cover a wide variety of topics, such as: theoretical and applied mechanics; cyber-physical systems, robotics, smart bio-medical and bio-mechatronic systems, new and intelligent materials and structures, modelling and simulation in mechanics and mechatronics, smart mechatronic production and control system, optics, control systems, big data modelling, micro- and nanotechnology, automation, manufacturing optimization, and other. Since the book ́s chapters represent contributions of scholars who work in both state-funded institutions and in the business environment, they reflect a clear picture of the novelties attained in the leading-edge sciences that are in the scope of the conference. It is our belief that the book is useful to both students and researchers in all areas of engineering, who will each find at least one topic worthy of their interest in this work.
Download or read book Mechatronics and Automation Engineering written by Jianhua Zhang and published by . This book was released on 2017 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The 2016 International Conference on Mechatronics and Automation Engineering (ICMAE2016) have been successfully held in Xiamen, China, on April 22nd - 24th. The conference received well over more than 200 submissions, however, only 64 articles were selected and recommended to be included in this proceedings, which organized into 4 main areas, namely, Industrial Automation and Control System, Intelligent Mechatronics and Robotics, Mechanical Engineering and Electrical Engineering and Computer Science. The conference provides the opportunity to showcase state of art research and development in Mechatronics and Automation Engineering from researchers and developers from around the world under one roof to compare notes and establish collaborative relationships."--Publisher's website.
Download or read book Proceedings written by and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: