Download or read book Proceedings of the International Conference Held at the University of Dundee Scotland UK on 8 9 July 2008 Role for concrete in global development written by Moray Newlands and published by Building Research Establishment. This book was released on 2008 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: 90 papers on innovation, research and case studies in cement and concrete materials, systems, design and construction, under four themes: Cements and admixtures; Energy and resources; Architecture and engineering; Developing world.
Download or read book Concrete Durability written by Thomas Dyer and published by CRC Press. This book was released on 2014-05-01 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written specifically for the young professional and addressing a growing need for a long service life with minimal maintenance, Concrete Durability takes a whole new look at the whole-life performance of structures. This text examines physical and chemical issues that can threaten the durability of concrete. It explores available options for achiev
Download or read book Recycled Aggregates written by Ravindra K Dhir and published by ICE Publishing. This book was released on 2019-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an ideal source of information on the subject and would be a suitable addition to any library as a resource for researchers seeking to develop an overview of the research on this topic.
Download or read book Recycled Aggregate Concrete Structures written by Jianzhuang Xiao and published by Springer. This book was released on 2017-11-13 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how, given the global challenge of a shortage of natural resources in the 21st century, the recycling of waste concrete is one of the most important means of implementing sustainable construction development strategies. Firstly, the book presents key findings on the micro- and meso-structure of recycled aggregate concrete (RAC), while the second part focuses on the mechanical properties of RAC: the strength, elastic modulus, Poisson’s ratio, stress-strain curve, etc. The third part of the book explores research on the durability of RAC: carbonization, chloride penetration, shrinkage and creep. It then presents key information on the mechanical behavior and seismic performance of RAC elements and structures: beams, columns, slabs, beam-column joints, and frames. Lastly, the book puts forward design guidelines for recycled aggregate concrete structures. Taken as a whole, the research results – based on a series of investigations the author has condu cted on the mechanical properties, durability and structural performance of recycled aggregate concrete (RAC) over the past 10 years – demonstrate that, with proper design and construction, it is safe and feasible to utilize RAC structures in civil engineering applications. The book will greatly benefit researchers, postgraduates, and engineers in civil engineering with an interest in this field.
Download or read book Fabric Formwork written by Alan Chandler and published by . This book was released on 2007 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabric-cast concrete involves casting concrete in forms made with flexible formwork. This provides the potential to produce forms that are both structurally efficient and architecturally exciting in a relatively inexpensive and practical manner. By careful shaping of the fabric it is possible to produce complex shapes that would otherwise be difficult and expensive to produce using conventional formwork systems. This book contains six essays that describe the collaboration between the Universities of Edinburgh and East London, together with the Centre for Architectural and Structural Technology (CAST) at the University of Manitoba, in their detailed and practical research into concrete casting and formwork. Richly illustrated with photographs and diagrams and containing new and innovative research this book offers the architect, engineer and student inspiration and technical guidance in this re-emerging material.
Download or read book Oil Gas and Mining written by Peter D. Cameron and published by World Bank Publications. This book was released on 2017-06-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil, Gas, and Mining: A Sourcebook for Understanding the Extractive Industries provides developing countries with a technical understanding and practical options around oil, gas, and mining sector development issues. A central premise of the Sourcebook is that good technical knowledge can better inform political, economic, and social choices with respect to sector development and the related risks and opportunities. The guidance provided by the Sourcebook assumes a broad set of overarching principles, all centered on good governance and directed at achieving positive and broadly based sustainable development outcomes. This Sourcebook is rich in presenting options to challenges, on the understanding that contexts and needs vary, and that there is much to be gained from appreciating the lessons learned from a broad set of experiences.
Download or read book Global Perspectives on Recognising Non formal and Informal Learning written by Madhu Singh and published by Springer. This book was released on 2015-06-05 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the relevance of recognition and validation of non-formal and informal learning education and training, the workplace and society. In an increasing number of countries, it is at the top of the policy and research agenda ranking among the possible ways to redress the glaring lack of relevant academic and vocational qualifications and to promote the development of competences and certification procedures which recognise different types of learning, including formal, non-formal and informal learning. The aim of the book is therefore to present and share experience, expertise and lessons in such a way that enables its effective and immediate use across the full spectrum of country contexts, whether in the developing or developed world. It examines the importance of meeting institutional and political requirements that give genuine value to the recognition of non-formal and informal learning; it shows why recognition is important and clarifies its usefulness and the role it serves in education, working life and voluntary work; it emphasises the importance of the coordination, interests, motivations, trust and acceptance by all stakeholders. The volume is also premised on an understanding of a learning society, in which all social and cultural groups, irrespective of gender, race, social class, ethnicity, mental health difficulties are entitled to quality learning throughout their lives. Overall the thrust is to see the importance of recognising non-formal and informal learning as part of the larger movement for re-directing education and training for change. This change is one that builds on an equitable society and economy and on sustainable development principles and values such as respect for others, respect for difference and diversity, exploration and dialogue.
Download or read book Concrete Progress written by G. M. Idorn and published by Thomas Telford. This book was released on 1997 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete progress deals with the technology that made concrete the most widely used building material in the world in the course of the past hundred years, and the most indispensable for the global socio-economic development in the new millennium. It offers an insight into many people's dedicated, exploratory concrete research, and into strategic planning and management of research and its transfer to engineering practice. This book is introduced by retrospectively highlighting the international history of concrete technology and uses.
Download or read book Guidelines for Protected Areas Legislation written by Barbara J. Lausche and published by IUCN. This book was released on 2011 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central aim of this publication is to consider the key elements of a modern, comprehensive, and effective legal framework for successful management of protected areas. They provide practical guidance for all those involved in developing, improving, or reviewing national legislation on protected areas, be they legal drafters and practitioners, protected area managers, interested NGOs, or scholars. These guidelines include fifteen case studies, eight dealing with the protected area legislation of individual countries and six cases dealing with specific sites providing fundamental solutions that stand the test of time.
Download or read book Performance Based Specifications and Control of Concrete Durability written by Hans Beushausen and published by Springer. This book was released on 2015-09-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.
Download or read book Screw Piles Installation and Design in Stiff Clay written by A.E. Holeyman and published by CRC Press. This book was released on 2020-08-12 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a snapshot of the current thinking and development perspectives on the installation and design of screw piles within the framework of Eurocode 7. The material included provides background on the various aspects of screw piles, with particular reference to stiff clays: 1. Exptensive description of a multi-million Euros research program on the loading behaviour of screw piles; 2. Geological and geotechnical characterization of Boom clay, and overview of screw pile testing over the last 30 years; 3. Results of the various load tests recently performed on 30 piles: static, dynamic, statnamic, and integrity and outcome of an international prediction event; 4. Tentative translation of the current body of knowledge in terms of potential application rules to be soon ascenrtained at the national level, as required by Eurocode 7. The remarkable aspects of the soil displacement piles covered in this book is an exceptionally low variability of geotechnical parameters,installation performance, and pile capacity calculations.
Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off
Download or read book Design Activism written by Alastair Fuad-Luke and published by Routledge. This book was released on 2013-06-17 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design academics and practitioners are facing a multiplicity of challenges in a dynamic, complex, world moving faster than the current design paradigm which is largely tied to the values and imperatives of commercial enterprise. Current education and practice need to evolve to ensure that the discipline of design meets sustainability drivers and equips students, teachers and professionals for the near-future. New approaches, methods and tools are urgently required as sustainability expands the context for design and what it means to be a 'designer'. Design activists, who comprise a diverse range of designers, teachers and other actors, are setting new ambitions for design. They seek to fundamentally challenge how, where and when design can catalyse positive impacts to address sustainability. They are also challenging who can utilise the power of the design process. To date, examination of contemporary and emergent design activism is poorly represented in the literature. This book will provide a rigorous exploration of design activism that will re-vitalise the design debate and provide a solid platform for students, teachers, design professionals and other disciplines interested in transformative (design) activism. Design Activism provides a comprehensive study of contemporary and emergent design activism. This activism has a dual aim - to make positive impacts towards more sustainable ways of living and working; and to challenge and reinvigorate design praxis,. It will collate, synthesise and analyse design activist approaches, processes, methods, tools and inspirational examples/outcomes from disparate sources and, in doing so, will create a specific canon of work to illuminate contemporary design discourse. Design Activism reveals the power of design for positive social and environmental change, design with a central activist role in the sustainability challenge. Inspired by past design activists and set against the context of global-local tensions, expressions of design activism are mapped. The nature of contemporary design activism is explored, from individual/collective action to the infrastructure that supports it generating powerful participatory design approaches, a diverse toolbox and inspirational outcomes. This is design as a political and social act, design to enable adaptive societal capacity for co-futuring.
Download or read book The SCERTS Model Assessment written by Barry M. Prizant and published by Paul H Brookes Publishing Company. This book was released on 2006 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set provides a multidisciplinary approach to enhancing communication and socioemotional abilities of young children with Autism Spectrum Disorder (ASD) and related disorders. The approach is a practical model that is systematic and semi-structured but is flexible to respond to the individual differences of children and families.
Download or read book Open Space People Space written by Catharine Ward Thompson and published by Taylor & Francis. This book was released on 2007-09-07 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Responds to current need for guidance on inclusive design in outdoor environments Deals with all situations, urban and rural Highly visual presentation Includes contributions from leading names in landscape, architecture and design
Download or read book Compressive Strength of Concrete written by Pavel Krivenko and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete made using mineral cements, the raw materials which on earth are practically endless, is known as one of the oldest building materials and during the last decades of the twentieth century has become a dominant building material for general use. At the same time, the requirements of the quality of concrete and its performance properties, in particular compressive strength, durability, economical efficiency, and low negative impact of its manufacture on the environment have not yet been completely met. Bearing these requirements in mind, researchers and engineers worldwide are working on how to satisfy these requirements. This book has been written by researchers and experts in the field and provides the state of the art on recent progress achieved on the properties of concrete, including concrete in which industrial by-products are utilized. The book is dedicated to graduate students, researchers, and practicing engineers in related fields.
Download or read book Cement Replacement Materials written by Ali Akbar Ramezanianpour and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the latest findings in the properties and application of Supplementary Cementing Materials and blended cements currently used in the world in concrete. Sustainability is an important issue all over the world. Carbon dioxide emission has been a serious problem in the world due to the greenhouse effect. Today many countries agreed to reduce the emission of CO2. Many phases of cement and concrete technology can affect sustainability. Cement and concrete industry is responsible for the production of 7% carbon dioxide of the total world CO2 emission. The use of supplementary cementing materials (SCM), design of concrete mixtures with optimum content of cement and enhancement of concrete durability are the main issues towards sustainability in concrete industry.
