Download or read book Proceedings of the IEEE 1987 Custom Integrated Circuits Conference written by and published by . This book was released on 1987 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Custom Integrated Circuits Conference written by and published by . This book was released on 1987 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
Download or read book Computer Aided Design and Design Automation written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-03-12 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of The Circuits and Filters Handbook, Third Edition focuses on computer aided design and design automation. In the first part of the book, international contributors address topics such as the modeling of circuit performances, symbolic analysis methods, numerical analysis methods, design by optimization, statistical design optimization, and physical design automation. In the second half of the text, they turn their attention to RF CAD, high performance simulation, formal verification, RTK behavioral synthesis, system-level design, an Internet-based micro-electronic design automation framework, performance modeling, and embedded computing systems design.
Download or read book Defect and Fault Tolerance in VLSI Systems written by C.H. Stapper and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Higher circuit densities, increasingly more complex application ohjectives, and advanced packaging technologies have suhstantially increased the need to incorporate defect-tolerance and fault-tolerance in the design of VLSI and WSI systems. The goals of defect-tolerance and fault-tolerance are yield enhancement and improved reliahility. The emphasis on this area has resulted in a new field of interdisciplinary scientific research. I n fact, advanced methods of defect/fault control and tolerance are resulting in enhanced manufacturahility and productivity of integrated circuit chips, VI.SI systems, and wafer scale integrated circuits. In 1987, Dr. W. Moore organized an "International Workshop on Designing for Yield" at Oxford University. Edited papers of that workshop were published in reference [II. The participants in that workshop agreed that meetings of this type should he con tinued. preferahly on a yearly hasis. It was Dr. I. Koren who organized the "IEEE Inter national Workshop on Defect and Fault Tolerance in VLSI Systems" in Springfield Massachusetts the next year. Selected papers from that workshop were puhlished as the first volume of this series [21.
Download or read book Circuits at the Nanoscale written by Krzysztof Iniewski and published by CRC Press. This book was released on 2018-10-08 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuits for Emerging Technologies Beyond CMOS New exciting opportunities are abounding in the field of body area networks, wireless communications, data networking, and optical imaging. In response to these developments, top-notch international experts in industry and academia present Circuits at the Nanoscale: Communications, Imaging, and Sensing. This volume, unique in both its scope and its focus, addresses the state-of-the-art in integrated circuit design in the context of emerging systems. A must for anyone serious about circuit design for future technologies, this book discusses emerging materials that can take system performance beyond standard CMOS. These include Silicon on Insulator (SOI), Silicon Germanium (SiGe), and Indium Phosphide (InP). Three-dimensional CMOS integration and co-integration with Microelectromechanical (MEMS) technology and radiation sensors are described as well. Topics in the book are divided into comprehensive sections on emerging design techniques, mixed-signal CMOS circuits, circuits for communications, and circuits for imaging and sensing. Dr. Krzysztof Iniewski is a director at CMOS Emerging Technologies, Inc., a consulting company in Vancouver, British Columbia. His current research interests are in VLSI ciruits for medical applications. He has published over 100 research papers in international journals and conferences, and he holds 18 international patents granted in the United States, Canada, France, Germany, and Japan. In this volume, he has assembled the contributions of over 60 world-reknown experts who are at the top of their field in the world of circuit design, advancing the bank of knowledge for all who work in this exciting and burgeoning area.
Download or read book Low Power VLSI Design written by Angsuman Sarkar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2016-08-08 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches basic and advanced concepts, new methodologies and recent developments in VLSI technology with a focus on low power design. It provides insight on how to use Tanner Spice, Cadence tools, Xilinx tools, VHDL programming and Synopsis to design simple and complex circuits using latest state-of-the art technologies. Emphasis is placed on fundamental transistor circuit-level design concepts.
Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book Field Programmable Gate Array Technology written by Stephen M. Trimberger and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many different kinds of FPGAs exist, with different programming technologies, different architectures and different software. Field-Programmable Gate Array Technology describes the major FPGA architectures available today, covering the three programming technologies that are in use and the major architectures built on those programming technologies. The reader is introduced to concepts relevant to the entire field of FPGAs using popular devices as examples. Field-Programmable Gate Array Technology includes discussions of FPGA integrated circuit manufacturing, circuit design and logic design. It describes the way logic and interconnect are implemented in various kinds of FPGAs. It covers particular problems with design for FPGAs and future possibilities for new architectures and software. This book compares CAD for FPGAs with CAD for traditional gate arrays. It describes algorithms for placement, routing and optimization of FPGAs. Field-Programmable Gate Array Technology describes all aspects of FPGA design and development. For this reason, it covers a significant amount of material. Each section is clearly explained to readers who are assumed to have general technical expertise in digital design and design tools. Potential developers of FPGAs will benefit primarily from the FPGA architecture and software discussion. Electronics systems designers and ASIC users will find a background to different types of FPGAs and applications of their use.
Download or read book Low power HF Microelectronics written by Gerson A. S. Machado and published by IET. This book was released on 1996 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together innovative modelling, simulation and design techniques in CMOS, SOI, GaAs and BJT to achieve successful high-yield manufacture for low-power, high-speed and reliable-by-design analogue and mixed-mode integrated systems.
Download or read book A Computer Aided Design and Synthesis Environment for Analog Integrated Circuits written by Geert Van der Plas and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text addresses the design methodologies and CAD tools available for the systematic design and design automation of analogue integrated circuits. Two complementary approaches discussed increase analogue design productivity, demonstrated throughout using design times of the different design experiments undertaken.
Download or read book VLSI Analog Filters written by P.V. Ananda Mohan and published by Springer Science & Business Media. This book was released on 2012-09-27 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers active R filters, OTA-C filters, and switched-capacitor filters, including topics such as differential output opamps, sensitivity analysis for passive components, multiple-feedback techniques, double-sampling, and N-path filters.
Download or read book UWB written by Ian Oppermann and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past 20 years UWB has been used for radar, sensing, military communications and niche applications. However, since the FCC ruling in 2002, which allowed the commercial operation of UWB for data communications, UWB has changed dramatically. Implementation oriented, this volume explores the fundamentals of UWB technology with particular emphasis on impulse radio (IR) techniques. It explains the key physical layer aspects of UWB technology, especially in communications and in control applications, and examines the multiple access (MAC) issues which are emerging as a hot area for practical UWB systems. Offers practical information about implementation Addresses issues of modulation possibilities, appropriate circuits for UWB, an example circuit design, MAC protocol issues and use of UWB for positioning applications Includes a literature survey examining books, articles and conference papers presenting the basic features of UWB technology and current systems Features a patent database search providing a historical perspective to the state-of-the-art technology UWB Theory and Applications will be indispensable to researchers interested in the practical issues of UWB technology and realistic assumptions of UWB, as well as engineers interested in implementing UWB devices.
Download or read book Digital Circuit Testing written by Francis C. Wong and published by Elsevier. This book was released on 2012-12-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent technological advances have created a testing crisis in the electronics industry--smaller, more highly integrated electronic circuits and new packaging techniques make it increasingly difficult to physically access test nodes. New testing methods are needed for the next generation of electronic equipment and a great deal of emphasis is being placed on the development of these methods. Some of the techniques now becoming popular include design for testability (DFT), built-in self-test (BIST), and automatic test vector generation (ATVG). This book will provide a practical introduction to these and other testing techniques. For each technique introduced, the author provides real-world examples so the reader can achieve a working knowledge of how to choose and apply these increasingly important testing methods.
Download or read book Closing the Gap Between ASIC Custom written by David Chinnery and published by Springer Science & Business Media. This book was released on 2002-06-30 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book carefully details design tools and techniques for high-performance ASIC design. Using these techniques, the performance of ASIC designs can be improved by two to three times. Important topics include: Improving performance through microarchitecture; Timing-driven floorplanning; Controlling and exploiting clock skew; High performance latch-based design in an ASIC methodology; Automatically identifying and synthesizing complex logic gates; Automated cell sizing to increase performance and reduce power; Controlling process variation.These techniques are illustrated by designs running two to three times the speed of typical ASICs in the same process generation.
Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: - Manufacturing techniques for 3-D ICs with TSVs - Electrical modeling and closed-form expressions of through silicon vias - Substrate noise coupling in heterogeneous 3-D ICs - Design of 3-D ICs with inductive links - Synchronization in 3-D ICs - Variation effects on 3-D ICs - Correlation of WID variations for intra-tier buffers and wires - Offers practical guidance on designing 3-D heterogeneous systems - Provides power delivery of 3-D ICs - Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more - Provides experimental case studies in power delivery, synchronization, and thermal characterization
Download or read book Low Power High Resolution Analog to Digital Converters written by Amir Zjajo and published by Springer Science & Business Media. This book was released on 2010-10-29 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. This has recently generated a great demand for low-power, low-voltage A/D converters that can be realized in a mainstream deep-submicron CMOS technology. However, the discrepancies between lithography wavelengths and circuit feature sizes are increasing. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. The inherent randomness of materials used in fabrication at nanoscopic scales means that performance will be increasingly variable, not only from die-to-die but also within each individual die. Parametric variability will be compounded by degradation in nanoscale integrated circuits resulting in instability of parameters over time, eventually leading to the development of faults. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. In an attempt to address these issues, Low-Power High-Resolution Analog-to-Digital Converters specifically focus on: i) improving the power efficiency for the high-speed, and low spurious spectral A/D conversion performance by exploring the potential of low-voltage analog design and calibration techniques, respectively, and ii) development of circuit techniques and algorithms to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover errors continuously. The feasibility of the described methods has been verified by measurements from the silicon prototypes fabricated in standard 180nm, 90nm and 65nm CMOS technology.
