Download or read book Proceedings of the U S National Congress of Applied Mechanics written by and published by . This book was released on 1987 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photoelasticity written by M. M. Leven and published by Elsevier. This book was released on 2013-10-22 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelasticity presents the development of photoelasticity. This book discusses the principle of optical equivalence of stressed isotropic bodies. Organized into 29 chapters, this book begins with an overview of the progress in three-dimensional photoelasticity. This text then summarizes the approximate theoretical analysis by the strain-energy technique and derives the basic equations for the evaluation of P and Q by graphical integration. Other chapters consider the importance of stress concentrations in the domain of strength of materials, particularly where fatigue is present. This book discusses a well the various instructive fractures and indicates that the strength of bakelite is determined by the maximum tensile stresses as computed by advanced methods of stress analysis. The final chapter deals with the two fundamental problems in three-dimensional photoplasticity and explains the general stress-optic law under plastic flow without unloading. This book is a valuable resource for designers as well as mechanical and civil engineers.
Download or read book Rock Mechanics and Engineering Volume 1 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-03-16 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles is the first volume of the five-volume set Rock Mechanics and Engineering and contains twenty-four chapters from key experts in the following fields: - Discontinuities; - Anisotropy; - Rock Stress; - Geophysics; - Strength Criteria; - Modeling Rock Deformation and Failure. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book NASA Technical Note written by United States. National Aeronautics and Space Administration and published by . This book was released on 1959 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Rehabilitation Research and Development written by and published by . This book was released on 1993 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Rehabilitation R D written by and published by . This book was released on 1993 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin
Download or read book A Survey of the Literature on the Size Effect on Material Strength written by H. Leon Harter and published by . This book was released on 1977 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly 500 years ago, Leonardo da Vinci observed that long wires are weaker than short wires of the same diameter. The statistical theory of extreme values (weakest-link theory) plays a very important role in studies of the size effect; competing theories include the energy theory and the technological theory. Summaries are given of relevant publications identified in the course of a literature survey on the size effect. Since this survey was motivated by concern about the reliability of large composite aircraft structures, which are now coming into use, special attention is given to the size effect on composite materials and structures. An attempt is made to summarize the present state of knowledge and to identify unsolved problems requiring further research.
Download or read book Plasticity written by Ronaldo I. Borja and published by Springer Science & Business Media. This book was released on 2013-06-14 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many excellent books written on the subject of plastic deformation in solids, but rarely can one find a textbook on this subject. “Plasticity Modeling & Computation” is a textbook written specifically for students who want to learn the theoretical, mathematical, and computational aspects of inelastic deformation in solids. It adopts a simple narrative style that is not mathematically overbearing, and has been written to emulate a professor giving a lecture on this subject inside a classroom. Each section is written to provide a balance between the relevant equations and the explanations behind them. Where relevant, sections end with one or more exercises designed to reinforce the understanding of the “lecture.” Color figures enhance the presentation and make the book very pleasant to read. For professors planning to use this textbook for their classes, the contents are sufficient for Parts A and B that can be taught in sequence over a period of two semesters or quarters.
Download or read book Proceedings of the 1966 Army Science Conference United States Military Academy West Point N Y 14 17 June 1966 written by and published by . This book was released on 1966 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Viscoelasticity written by Pouria Hajikarimi and published by Elsevier. This book was released on 2021-04-27 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Viscoelasticity: Bituminous Materials Characterization and Modeling starts with an introduction to the theory of viscoelasticity, emphasizing its importance to various applications in material characterization and modeling. It next looks at constitutive viscoelastic functions, outlines basic equations for different loading conditions, and introduces the Boltzmann superposition principle, relaxation modulus, and creep compliance. Mechanical models, including integer-order and fractional-order are studied next, featuring real experimentation data alongside the benefits and drawbacks of using each model in various real-world scenarios. The book then covers the correspondence principle, followed by time–temperature superposition, featuring a simple procedure to construct a real master curve and challenges that might be encountered. The concluding chapters cover the Hopkins and Hamming, Park and Kim, and General Power law methods for interconversion of constitutive viscoelastic functions, applications of viscoelasticity for experimental tests, and incremental form of viscoelastic relations for numerical modeling. The book also includes supplementary codes that users can duplicate and use in their own work. - Takes an applied approach to material viscoelasticity, explaining complicated viscoelastic equations and principles - Presents examples of those equations and principles being applied to common problems in realworld settings - Covers constitutive viscoelastic functions, including relaxation modulus and creep compliance - Outlines the construction of a master curve of viscoelastic material considering time–temperature superposition - Couples the correspondence principle with common viscoelastic experiments, such as threepoint bending beam, axial and torsional bar, and dynamic shear rheometer - Provides supplementary codes
Download or read book Problems of mixed mode crack propagation written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is not just another book on fracture mechanics. In recent years, there have been many books published on this subject in an attempt to assess the state of the art and its applications. The majority of the work dealt with energy release rate or critical stress intensity factor and is applicable only to fracture toughness testing. The main reason for this restriction is that the energy release concept cannot easily be extended to mixed mode fracture that occurs in practice as the rule rather than the exception. Cracks will normally curve or turn because the direction of loading can change as a function of time. Their directions of growth cannot be assumed as an a priori and must be determined from a pre-assumed criterion. Analysts are still perplexed with selecting an appropriate fracture criterion because it requires much discernment and judgement. Criteria which often appeared valid for idealized situations are quickly dis credited when encountering more complex physical phenomena. Moreover, the claim of generality cannot be justified on the basis of agreement between theory and experiment for a few simple examples.
Download or read book Plane Strain Slip Line Fields for Metal Deformation Processes written by W. Johnson and published by Elsevier. This book was released on 2013-09-03 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plane-Strain Slip-Line Fields for Metal-Deformation Processes: A Source Book and Bibliography provides information pertinent to the theory and application of plain-train slip fields to metal-working problems. This book discusses the industrial importance of axial symmetry. Organized into seven chapters, this book begins with an overview of the oldest processes of metal forming, including forging, coining, hammering, drifting, cutting, or parting. This text then examines the basic aspects of the basic theory of classical plasticity. Other chapters consider the governing equations of the plane plastic flow of a rigid-perfectly plastic solid. This book discusses as well the methods for the solution of problems of plane plastic flow of a rigid-perfectly plastic solid. The final chapter deals with the application of the theory of plasticity to the quasi-static plane-strain deformation of an isotropic rigid-perfectly plastic, rate insensitive material. This book is a valuable resource for mechanical engineers, materials scientists, teachers, and research workers.
Download or read book Vibrations of Elastic Plates written by Yi-Yuan Yu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on my experiences as a teacher and as a researcher for more than four decades. When I started teaching in the early 1950s, I became interested in the vibrations of plates and shells. Soon after I joined the Polytechnic Institute of Brooklyn as a professor, I began working busily on my research in vibrations of sandwich and layered plates and shells, and then teaching a graduate course on the same subject. Although I tried to put together my lecture notes into a book, I never finished it. Many years later, I came to the New Jersey Institute of Technology as the dean of engineering. When I went back to teaching and looked for some research areas to work on, I came upon laminated composites and piezoelectric layers, which appeared to be natural extensions of sandwiches. Working on these for the last several years has brought me a great deal of joy, since I still am able to find my work relevant. At least I can claim that I still am pursuing life-long learning as it is advocated by educators all over the country. This book is based on the research results I accumulated during these two periods of my work, the first on vibrations and dynamical model ing of sandwiches, and the second on laminated composites and piezoelec tric layers.
Download or read book Handbook of Experimental Structural Dynamics written by Randall Allemang and published by Springer Nature. This book was released on 2022-06-30 with total page 1426 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SEM Handbook of Experimental Structural Dynamics stands as a comprehensive overview and reference for its subject, applicable to workers in research, product design and manufacture, and practice. The Handbook is devoted primarily to the areas of structural mechanics served by the Society for Experimental Mechanics IMAC community, such as modal analysis, rotating machinery, structural health monitoring, shock and vibration, sensors and instrumentation, aeroelasticity, ground testing, finite element techniques, model updating, sensitivity analysis, verification and validation, experimental dynamics sub-structuring, quantification of margin and uncertainty, and testing of civil infrastructure. Chapters offer comprehensive, detailed coverage of decades of scientific and technologic advance and all demonstrate an experimental perspective. Several sections specifically discuss the various types of experimental testing and common practices utilized in the automotive, aerospace, and civil structures industries. · History of Experimental Structural Mechanics · DIC Methods - Dynamic Photogrammetry · LDV Methods · Applied Digital Signal Processing · Introduction to Spectral - Basic Measurements · Structural Measurements - FRF · Random and Shock Testing · Rotating System Analysis Methods · Sensors Signal Conditioning Instrumentation · Design of Modal Tests · Experimental Modal Methods · Experimental Modal Parameter Evaluation · Operating Modal Analysis Methods · Analytical Numerical Substructuring · Finite Element Model Correlation · Model Updating · Damping of Materials and Structures · Model Calibration and Validation in Structures · Uncertainty Quantification: UQ, QMU and Statistics · Nonlinear System Analysis Methods (Experimental) · Structural Health Monitoring and Damage Detection · Experimental Substructure Modeling · Modal Modeling · Response (Impedance) Modeling · Nonlinear Normal Mode Analysis Techniques (Analytical) · Modal Modeling with Nonlinear Connection Elements (Analytical) · Acoustics of Structural Systems (VibroAcoustics) · Automotive Structural Testing · Civil Structural Testing · Aerospace Perspective for Modeling and Validation · Sports Equipment Testing · Applied Math for Experimental Structural Mechanics Contributions present important theory behind relevant experimental methods as well as application and technology. Topical authors emphasize and dissect proven methods and offer detail beyond a simple review of the literature. Additionally, chapters cover practical needs of scientists and engineers who are new to the field. In most cases, neither the pertinent theory nor, in particular, the practical issues have been presented formally in current academic textbooks. Each chapter in the Handbook represents a ’must read’ for someone new to the subject or for someone returning to the field after an absence. Reference lists in each chapter consist of the seminal papers in the literature. This Handbook stands in parallel to the SEM Handbook of Experimental Solid Mechanics, where this Handbook focuses on experimental dynamics of structures at a macro-scale often involving multiple components and materials where the SEM Handbook of Experimental Solid Mechanics focuses on experimental mechanics of materials at a nano-scale and/or micro-scale.
Download or read book The Shock and Vibration Bulletin written by and published by . This book was released on 1968 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
