Download or read book Proceedings of the Eighth International Conference on Civil and Structural Engineering Computing written by B. H. V. Topping and published by Civil Comp Press. This book was released on 2001 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the extended abstracts of the contributed papers that were presented at the Eighth International Conference on Civil & Structural Engineering Computing, which was held in Eisenstadt, Vienna, Austria, from 19-21 September 2001. The full length papers are available in electronic format on the accompanying CD-ROM.

Download or read book Proceedings of the Eighth International Conference on Management Science and Engineering Management written by Jiuping Xu and published by Springer. This book was released on 2014-05-06 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Proceedings of the Eighth International Conference on Management Science and Engineering Management (ICMSEM) held from July 25 to 27, 2014 at Universidade Nova de Lisboa, Lisbon, Portugal and organized by International Society of Management Science and Engineering Management (ISMSEM), Sichuan University (Chengdu, China) and Universidade Nova de Lisboa (Lisbon, Portugal). The goals of the conference are to foster international research collaborations in Management Science and Engineering Management as well as to provide a forum to present current findings. A total number of 138 papers from 14 countries are selected for the proceedings by the conference scientific committee through rigorous referee review. The selected papers in the first volume are focused on Intelligent System and Management Science covering areas of Intelligent Systems, Decision Support Systems, Manufacturing and Supply Chain Management.

Download or read book Proceedings of the 8th International Conference on Computational Science and Technology written by Rayner Alfred and published by Springer Nature. This book was released on 2022-03-25 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the Seventh International Conference on Computational Science and Technology (ICCST 2021), held in Labuan, Malaysia, on 28–29 August 2021. The respective contributions offer practitioners and researchers a range of new computational techniques and solutions, identify emerging issues, and outline future research directions, while also showing them how to apply the latest large-scale, high-performance computational methods.

Download or read book Proceedings of the 8th International Conference on Advanced Intelligent Systems and Informatics 2022 written by Aboul Ella Hassanien and published by Springer Nature. This book was released on 2022-11-17 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book constitutes the refereed proceedings of the 8th International Conference on Advanced Intelligent Systems and Informatics (AISI 2021), which took place in Cairo, Egypt, during November 20–22, 2022, and is an international interdisciplinary conference that presents a spectrum of scientific research on all aspects of informatics and intelligent systems, technologies, and applications.

Download or read book Computing Methods in Applied Sciences and Engineering written by R. Glowinski and published by SIAM. This book was released on 1990-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of the Ninth International Conference on Computing Methods in Applied Sciences and Engineering, Paris, France, January 29-February 2, 1990"--T.p. verso.

Download or read book Computing Methods in Applied Sciences and Engineering 1977 Third International Symposium December 5 9 1977 IRIA LABORIA Institut de Recherche d Informatique et d Automatique written by R. Glowinski and published by Springer. This book was released on 2006-11-15 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Third International Conference on Computational Intelligence and Informatics written by K. Srujan Raju and published by Springer Nature. This book was released on 2020-03-17 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features high-quality papers presented at the International Conference on Computational Intelligence and Informatics (ICCII 2018), which was held on 28–29 December 2018 at the Department of Computer Science and Engineering, JNTUH College of Engineering, Hyderabad, India. The papers focus on topics such as data mining, wireless sensor networks, parallel computing, image processing, network security, MANETS, natural language processing and Internet of things.

Download or read book Proceedings of International Conference on ICT for Sustainable Development written by Suresh Chandra Satapathy and published by Springer. This book was released on 2016-02-25 with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes of this book collect high-quality peer-reviewed research papers presented in the International Conference on ICT for Sustainable Development (ICT4SD 2015) held at Ahmedabad, India during 3 – 4 July 2015. The book discusses all areas of Information and Communication Technologies and its applications in field for engineering and management. The main focus of the volumes are on applications of ICT for Infrastructure, e-Governance, and contemporary technologies advancements on Data Mining, Security, Computer Graphics, etc. The objective of this International Conference is to provide an opportunity for the researchers, academicians, industry persons and students to interact and exchange ideas, experience and expertise in the current trend and strategies for Information and Communication Technologies.

Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scienti?c discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems – such as biology, envir- mental and geo-sciences, physics, and chemistry – and synthetic systems such as electronics and ?nancial and economic systems. The discipline is a bridge b- ween ‘classical’ computer science – logic, complexity, architecture, algorithms – mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this ?eld. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): ‘There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential ofcomputational science’. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous s- mulus from the various international programs on advanced computing, e.g.

Download or read book Numerical Approximation of Hyperbolic Systems of Conservation Laws written by Edwige Godlewski and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is devoted to the theory and approximation of nonlinear hyper bolic systems of conservation laws in one or two space variables. It follows directly a previous publication on hyperbolic systems of conservation laws by the same authors, and we shall make frequent references to Godlewski and Raviart (1991) (hereafter noted G. R. ), though the present volume can be read independently. This earlier publication, apart from a first chap ter, especially covered the scalar case. Thus, we shall detail here neither the mathematical theory of multidimensional scalar conservation laws nor their approximation in the one-dimensional case by finite-difference con servative schemes, both of which were treated in G. R. , but we shall mostly consider systems. The theory for systems is in fact much more difficult and not at all completed. This explains why we shall mainly concentrate on some theoretical aspects that are needed in the applications, such as the solution of the Riemann problem, with occasional insights into more sophisticated problems. The present book is divided into six chapters, including an introductory chapter. For the reader's convenience, we shall resume in this Introduction the notions that are necessary for a self-sufficient understanding of this book -the main definitions of hyperbolicity, weak solutions, and entropy present the practical examples that will be thoroughly developed in the following chapters, and recall the main results concerning the scalar case.

Download or read book Proceedings of the 1993 International Conference on Parallel Processing written by Salim Hariri and published by CRC Press. This book was released on 1993-08-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume work presents a compendium of current and seminal papers on parallel/distributed processing offered at the 22nd International Conference on Parallel Processing, held August 16-20, 1993 in Chicago, Illinois. Topics include processor architectures; mapping algorithms to parallel systems, performance evaluations; fault diagnosis, recovery, and tolerance; cube networks; portable software; synchronization; compilers; hypercube computing; and image processing and graphics. Computer professionals in parallel processing, distributed systems, and software engineering will find this book essential to complete their computer reference library.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuzzy Engineering and Operations Research written by Bing-Yuan Cao and published by Springer Science & Business Media. This book was released on 2012-06-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Fuzzy Engineering and Operations Research” is the edited outcome of the 5th International Conference on Fuzzy Information and Engineering (ICFIE2011) held during Oct. 15-17, 2011 in Chengdu, China and by the 1st academic conference in establishment of Guangdong Province Operations Research Society (GDORSC) held on Oct. 20, 2011 in Guangzhou, China. The 5th ICFIE2011, built on the success of previous conferences, and the GDORC, first held, are major Symposiums, respectively, for scientists, engineers practitioners and Operation Research (OR) researchers presenting their updated results, developments and applications in all areas of fuzzy information and engineering and OR. It aims to strengthen relations between industry research laboratories and universities, and to create a primary symposium for world scientists in Fuzziology and OR fields. The book contains 62 papers and is divided into five main parts: “Fuzzy Optimization, Logic and Information”, “The mathematical Theory of Fuzzy Systems”, “Fuzzy Engineering Applications and Soft Computing Methods”, “OR and Fuzziology” and “Guess and Review”.

Download or read book Advances in Data and Information Sciences written by Mohan L. Kolhe and published by Springer Nature. This book was released on 2020-01-02 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a collection of high-quality peer-reviewed research papers presented at the 2nd International Conference on Data and Information Sciences (ICDIS 2019), held at Raja Balwant Singh Engineering Technical Campus, Agra, India, on March 29–30, 2019. In chapters written by leading researchers, developers, and practitioner from academia and industry, it covers virtually all aspects of computational sciences and information security, including central topics like artificial intelligence, cloud computing, and big data. Highlighting the latest developments and technical solutions, it will show readers from the computer industry how to capitalize on key advances in next-generation computer and communication technology.

Download or read book Intelligent Computing in Optimal Design written by Tadeusz Burczyński and published by Springer Nature. This book was released on 2020-01-01 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to intelligent design of structures as a novel kind of designing based on computational intelligence. The proposed methodology based on computational intelligence has some heuristic and learning attributes typical for natural intelligence. Computer models of the structures are built on the base of the finite element method (FEM), the boundary element method (BEM) or coupling of FEM and BEM. The short description of possible discrete models of structures using these methods is included in the Chapter 2. Various kinds of intelligent approaches using sequential, parallel, distributed, fuzzy and hybrid evolutionary, immune and particle swarm algorithms and neural computing are presented in Chapter 3. Different kinds of optimization such as shape, topology, size and material optimization for structures under static and dynamical mechanical and thermo-mechanical loadings, structures with cracks and composite structures are considered in Chapter 4. Multi-objective optimization for coupled problems is also taken into account. Several numerical examples illustrating these kinds of optimization are presented for 2-D (plane-stress or plane-strain, plates, shells) as well as 3-D structures. Chapter 5 is devoted to special problems related to solving inverse problems in which boundary conditions, defects such as voids or cracks and material characteristics, are unknown. Closing comments summarizing the book are presented in Chapter 6.

Download or read book Parallel Computing is Everywhere written by S. Bassini and published by IOS Press. This book was released on 2018-03-07 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most powerful computers work by harnessing the combined computational power of millions of processors, and exploiting the full potential of such large-scale systems is something which becomes more difficult with each succeeding generation of parallel computers. Alternative architectures and computer paradigms are increasingly being investigated in an attempt to address these difficulties. Added to this, the pervasive presence of heterogeneous and parallel devices in consumer products such as mobile phones, tablets, personal computers and servers also demands efficient programming environments and applications aimed at small-scale parallel systems as opposed to large-scale supercomputers. This book presents a selection of papers presented at the conference: Parallel Computing (ParCo2017), held in Bologna, Italy, on 12 to 15 September 2017. The conference included contributions about alternative approaches to achieving High Performance Computing (HPC) to potentially surpass exa- and zetascale performances, as well as papers on the application of quantum computers and FPGA processors. These developments are aimed at making available systems better capable of solving intensive computational scientific/engineering problems such as climate models, security applications and classic NP-problems, some of which cannot currently be managed by even the most powerful supercomputers available. New areas of application, such as robotics, AI and learning systems, data science, the Internet of Things (IoT), and in-car systems and autonomous vehicles were also covered. As always, ParCo2017 attracted a large number of notable contributions covering present and future developments in parallel computing, and the book will be of interest to all those working in the field.

Download or read book Proceedings of International Conference on Communication and Networks written by Nilesh Modi and published by Springer. This book was released on 2017-04-07 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume contains 75 papers presented at International Conference on Communication and Networks (COMNET 2015) held during February 19–20, 2016 at Ahmedabad Management Association (AMA), Ahmedabad, India and organized by Computer Society of India (CSI), Ahmedabad Chapter, Division IV and Association of Computing Machinery (ACM), Ahmedabad Chapter. The book aims to provide a forum to researchers to propose theory and technology on the networks and services, share their experience in IT and telecommunications industries and to discuss future management solutions for communication systems, networks and services. It comprises of original contributions from researchers describing their original, unpublished, research contribution. The papers are mainly from 4 areas – Security, Management and Control, Protocol and Deployment, and Applications. The topics covered in the book are newly emerging algorithms, communication systems, network standards, services, and applications.