Download or read book Advances In Catalyst Design Proceedings Of The Workshop written by Mauro Graziani and published by World Scientific. This book was released on 1991-05-17 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume offer a review on Catalyst Design including recent advances and theories. It also includes assessments of the development of long-term research activities in catalysis at ICS. Topics covered include catalytic materials, organometallic chemistry, supports and support interactions and spectroscopic methods, and are presented by top-level international specialists such as J Brown (Oxford); W Keim (Aachen); R Prins (Zurich); C N R Rao (Bangalore); P Ratnasamy (Pune); R Sanchez-Delgado (Caracas); and R Ugo (Milan).

Download or read book Advances In Catalyst Design Vol 2 Proceedings Of The 2nd Workshop On Catalyst Design written by Mauro Graziani and published by World Scientific. This book was released on 1993-09-30 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: The workshop organized by the international centre for science and technology provided an occasion for researchers active both in homogeneous and heterogeneous catalysis to meet and look for common interpretations and a common language.

Download or read book Catalysis In Chemistry And Biology Proceedings Of The 24th International Solvay Conference On Chemistry written by Kurt Wuthrich and published by World Scientific. This book was released on 2018-06-27 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceedings of the 24th International Solvay Conference on Chemistry comprise contributed short personal statements and transcripts of in-depth discussions on 'Catalysis in Chemistry and Biology' from a by-invitation-only select group of 48 eminent scientists, including four Nobel Laureates, from all parts of the world. The theme of the conference was presented in six sessions, along which the Proceedings are organized. The first session on 'Homogeneous Catalysis,' chaired by Professor Robert Grubbs, is devoted to basic research on catalysis in homogeneous solutions and applications thereof. 'Heterogeneous Catalysis and Characterization of Catalyst Surfaces,' chaired by Professor Gerhard Ertl, includes extensive references to industrial applications of catalysis on solid supports, and discussions on the experimental techniques used in this field. 'Catalysis by Microporous Materials,' chaired by Professor Mark E. Davis, is devoted to a detailed characterization of this particular class of solid support catalysts, with special emphasis on model analysis of the processes catalyzed by these materials. 'Catalysis under Extreme Conditions: Studies at High Pressure and High Temperatures — Relations with Processes in Nature,' chaired by Professor Henk N W Lekkerkerker, broadens the scope of the two preceding sessions with exciting illustrations. The sessions on 'Catalysis by Protein Enzymes,' chaired by Prof. JoAnne Stubbe, and 'Catalysis by Ribozymes in Molecular Machines,' chaired by Prof. David Lilley, present at the same time an exciting extension of and a contrast to the initial four sessions. The combination of the six sessions provides an impressive overview, giving innovative insights into relationships between catalysis in chemical processes and in biological systems, and a unique outlook to anticipated developments in the coming years and the more distant future.

Download or read book Proceedings of the 8th International Conference on Foundations of Computer Aided Process Design written by and published by Elsevier. This book was released on 2014-07-14 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects together the presentations at the Eighth International Conference on Foundations of Computer-Aided Process Design, FOCAPD-2014, an event that brings together researchers, educators, and practitioners to identify new challenges and opportunities for process and product design. The chemical industry is currently entering a new phase of rapid evolution. The availability of low-cost feedstocks from natural gas is causing renewed investment in basic chemicals in the OECD, while societal pressures for sustainability and energy security continue to be key drivers in technology development and product selection. This dynamic environment creates opportunities to launch new products and processes and to demonstrate new methodologies for innovation, synthesis and design. FOCAPD-2014 fosters constructive interaction among thought leaders from academia, industry, and government and provides a showcase for the latest research in product and process design. - Focuses exclusively on the fundamentals and applications of computer-aided design for the process industries. - Provides a fully archival and indexed record of the FOCAPD14 conference - Aligns the FOCAPD series with the ESCAPE and PSE series

Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.

Download or read book Catalysis An Integrated Approach written by B.A. Averill and published by Elsevier. This book was released on 1999-09-07 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concentrates on industrially relevant reactions which are catalyzed by heterogeneous and homogeneous catalysts. Homogeneous catalysis by metal complexes is treated jointly with heterogeneous catalysis using metallic and non-metallic solids. In both areas the high degree of sophistication of spectroscopic techniques and theoretical modelling has led to an enormous increase in our understanding at the molecular level. This holds for the kinetics of the reactions and the reactivities of the catalysts, as well as for the syntheses of the catalytic materials. The development of catalysis science since the first edition of this book has necessitated a thorough revision, including special chapters on biocatalysis, catalyst characterization and adsorption methods. The multidisciplinary nature of catalysis is reflected in the choice of a novel combination of basic disciplines which will be refreshing and inspiring to readers.

Download or read book Catalysts in Petroleum Refining and Petrochemical Industries 1995 written by M. Absi-Halabi and published by Elsevier. This book was released on 1996-01-15 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis plays an increasingly critical role in modern petroleum refining and basic petrochemical industries as market demands for and specifications of petroleum and petrochemical products are continuously changing. As we enter the 21st century, new challenges for catalysis science and technology are anticipated in almost every field. Particularly, better utilization of petroleum resources and demands for cleaner transportation fuels are major items. It was against this background that the 2nd International Conference on Catalysts in Petroleum Refining and Petrochemical Industries was organized. The conference was attended by around 300 specialists in the catalysis field from both academia and industry from over 30 countries. It provided a forum for the exchange of ideas between scientists and engineers from the region with their counterparts from industrialized countries.The papers from the conference, which were carefully selected from around 100 submissions, were refereed in terms of scientific and technical content and format in accordance with internationally accepted standards. They comprise a mix of reviews providing an overview of selected areas, original fundamental research results, and industrial experiences.

Download or read book Catalysis and Automotive Pollution Control IV written by N. Kruse and published by Elsevier. This book was released on 1998-05-29 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the energy crises and the recession, there has been a global, explosive growth in the amount of motor vehicles. In the past 50 years, the amount has increased from 50 to 700 million vehicles. For economical reasons they will probably continue to be used for a considerable number of years, despite the poor yield of internal combustion engines resulting in the inevitable production of some gaseous pollutants. The subsequent increase of gaseous pollutants in our atmosphere caused by exhaust gas from automobiles has enhanced the problem of the elimination of these pollutants produced by internal combustion engines. Catalysis has proven to be the best solution to lower the content of exhaust gas in pollutants.As its predecessors, CAPoC4 proved to be a suitable platform for discussing technological improvements and developments along with future perspectives and challenges. In the light of new results and further legislative regulations, the following topics were intensely discussed: *low light-off behaviour based on improved catalysts and substrate formulations *efficient adsorber systems for storage of hydrocarbon emissions *electrically heated catalyst systems ahead the main catalyst or, alternatively, close coupled catalysts (at the manifold of the engine) • lean DeNOx catalysts allowing for decomposition of NOx in the oxygen-rich exhaust of direct injection gasoline engines and high speed injection diesel engines or, alternatively, NOx trapping/reduction in a hybrid approach * collection and destruction of dry particulates or soot.There is no doubt that clean vehicle technology is a vital part of improving air quality. Challenges remain and call for technological answers. Catalytic air pollution control is still an area providing a considerable incentive for innovative work.

Download or read book Experiments in Catalytic Reaction Engineering written by J.M. Berty and published by Elsevier. This book was released on 1999-08-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science of catalytic reaction engineering studies the catalyst and the catalytic process in the laboratory in order to predict how they will perform in production-scale reactors. Surprises are to be avoided in the scaleup of industrial processes. The laboratory results must account for flow, heat and mass transfer influences on reaction rate to be useful for scaleup. Calculated performance based on these results must also be useful to maximization of profit and safety and minimization of pollution. To this end, information on products as well as byproducts and heat produced must be generated. If a sufficiently large database of knowledge is produced, optimization studies will be possible later if economic conditions change.The field of reaction engineering required new tools. For kinetic and catalyst testing, the most successful of these tools was the internal recycle reactor. Studies in recycle reactors can be made under well-defined conditions of flow and associated transfer processes, and close to commercial operation. The recycle reactor eliminates or minimizes the effect of transfer process, and allows the remaining ones to be known.Features of this book:• Provides insight into a field that is neither well understood nor properly appreciated.• Gives a deeper understanding of reaction engineering practice.• Helps avoid frustration and disappointment in industrial research. This book is short and clear enough to assist all members of the R&D and Engineering team, whether reaction engineers, or specialists in other fields. This is critical in this new age of computation and communication, when team members must each know at least something of their colleagues' fields. Additionally, many scientists in more exploratory or fundamental fields can use recycle reactors to study basic phenomena free of transfer interactions.

Download or read book Proceedings of the International Conference on Colloid and Surface Science written by Y. Iwasawa and published by Elsevier. This book was released on 2001-02-15 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this Conference was to discuss the results of recent developments and the future prospect in science and technology of the field. The field has been growing and flourishing, while indicating many problems to be uncovered and solved. The conference was structured to encourage interaction and to stimulate the exchange of ideas to accomplish the above purpose.Key issues and materials related to the Conference were included as follows: • Molecular Assemblies in Solutions; • Fine Particles and Colloidal Dispersions; • Supramolecular Organized Films; • Nanostructural Solid Surfaces; • Industrial Applications and Products.The Conference comprised 2 plenary lectures, 42 invited lectures, 150 oral presentations and 266 poster presentations.

Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.

Download or read book Fluid Catalytic Cracking V written by M.L. Occelli and published by Elsevier. This book was released on 2001-04-27 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst production for the transformation of crudes into gasoline and other fuel products is a billion dollar/year business and fluid cracking catalysts (FCCs) represent almost half of the refinery catalyst market. During the cracking reactions, the FCC surface is contaminated by metals (Ni, V, Fe, Cu, Na) and by coke deposition. As a result, the catalyst activity and product selectivity is reduced to unacceptable levels thus forcing refiners to replace part of the recirculating equilibrium FCC inventory with fresh FCC to compensate for losses in catalyst performance. About 1,100 tons/day of FCC are used worldwide in over 200 fluid cracking catalyst units (FCCUs). It is for these reasons that refiners' interest in FCC research has remained high through the years almost independantly, of crude oil prices. However, recent oil company mergers and the dissolution of research laboratories, have drastically decreased the number of researchers involved in petroleum refining research projects; as a result the emphasis of research has shifted from new materials to process improvements and this trend is clearly reflected in the type of papers contained in this volume. Modern spectroscopic techniques continue to be essential in the understanding of catalyst performance and several chapters in the book describe the use of 27Al, 29Si and 13C NMR to study variation in FCC acidity during aging and coke deposition. In addition several chapters have been dedicated to the modeling of FCC deactivation, and to the understanding of contact times on FCC performance. Refiners efforts to conform with environmental regulations are reflected in chapters dealing with sulfur removal, metals contaminants and olefin generation.

Download or read book Scientific Bases for the Preparation of Heterogeneous Catalysts written by E. Gaigneaux and published by Elsevier. This book was released on 2002-08-29 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become a tradition that every four years, the Université Catholique de Louvain and the Katholieke Universiteit Leuven jointly organize a symposium devoted to the scientific bases for the preparation of heterogeneous catalysts. These meetings bring together researchers from academia and industry and offer a forum for discussions on the chemistry involved in the preparation of industrial heterogeneous catalysts. This volume containing the Proceedings of the 8th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts consists of papers summarizing most of the 139 oral communications and posters selected by the international scientific committee, composed of 27 experts in the field of catalyst preparation, holding an industrial or academia appointment.The contributions focus on the aspects of catalyst preparation. The main topics are: new approaches in catalyst preparation; advanced preparations of nanoporous and mesoporous catalysts; catalysts preparation for special performances and purposes; catalysts for environmental purposes; and molecular catalysis. Emphasis is put on the role that catalysis can play as an essential element of sustainable development.

Download or read book Catalyst Deactivation 1997 written by G.A. Fuentes and published by Elsevier. This book was released on 1997-09-12 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalyst Deactivation 1997 focused on 9 key topical areas: carbon deposition and coke formation, chemicals, environmental catalysis, modeling, petroleum processing, poisoning, syngas conversion, techniques, and thermal degradation. All of these areas were well represented at the meeting; moreover, several review articles were presented that provide perspectives on new research and development thrusts. The proceedings of the meeting are organized with six review and award articles at the front of the volume followed by topical articles a keynote, 5-6 oral, and 2-3 poster papers. A list of authors is provided at the end of the book. It should be emphasized that all of the papers were ranked and reviewed by members of the Scientific Committee.

Download or read book Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering written by Md. Abdul Maleque and published by Springer Nature. This book was released on 2023-05-13 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022), August 9–10, Kuala Lumpur, Malaysia. It presents articles in topics that outline the state-of-the-art information in manufacturing and materials engineering for academia and industries. The topics represent the strong synergy between manufacturing, materials, design, and management supporting the transition from product service systems to life cycle engineering services as a contributor to high value manufacturing. The scope of this book also presents a set of new additive manufacturing, 3D printing, and advanced materials with new technology; green technology for United Nations SDGs; modeling & simulation of materials and manufacturing with some classical case examples. It caters to academics and industrial practitioners who have research interest in the latest advances in manufacturing and materials engineering.

Download or read book Chemical Micro Process Engineering written by Volker Hessel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro process engineering is approaching both academia and industry. With the provision of micro devices and systems by commercial suppliers, one main barrier for using these units has been eliminated. More and more they become familiar, thereby being one facet of the upheaval in chemical industry. This book focuses on processes rather than on devices: what is 'before' and 'behind' micro device fabrication. A comprehensive and detailed overview is given on: - A multi-faceted, hierarchic analysis of chemical micro process technology - Modelling and simulation of micro reactors - Liquid- and liquid/liquid-phase reactions - Gas/liquid reactions - Gas-phase reactions (heterogeneous catalysis)

Download or read book Proceedings of 22nd International Conference and Expo on Nanoscience and Molecular Nanotechnology 2017 written by ConferenceSeries and published by ConferenceSeries. This book was released on 2017-10-31 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nov 06-08, 2017 Frankfurt, Germany Key Topics : Nanomedicine & Nanobiotechnology,Nanoparticles, Nanomaterials- production, synthesis and processing, Nanoengineering, Computation, Simulation & Modeling of Nanostructures, Nano systems & devices, Bio-Nanomaterials and biomedical devices, applications, Nano photonics, Nano Imaging, Spectroscopy & Plasmonic devices, Nanoelectronics and nanometrology, Nanotechnology & Energy, Micro/ Nano-fabrication, Nano patterning, Nano Lithography & Nano Imprinting, Nanotechnology: Environmental effects and Industrial safety, Future prospects of Nanotechnologies and commercial viability, Graphene and Applications, Other Related research, Dna Nanoelectronics,