Download or read book Fluid Power Pumps and the Electrification written by Samuel Kärnell and published by Linköping University Electronic Press. This book was released on 2020-05-25 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more vehicles are being electrified. Mobile working machines and heavy trucks are not excluded, and these machines are often hydraulically intense. Electrification entails new requirements for the hydraulic system and its components, and these requirements must be taken into consideration. Hydraulic systems have looked similar for a long time, but now there is an opportunity to advance. Many things change when a diesel engine is replaced with an electric motor. For example, variable-speed control becomes more relevant, electric regeneration becomes possible, and the use of multiple prime movers becomes an attractive alternative. The noise from the hydraulic system will also be more noticeable when the diesel engine is gone. Furthermore, the introduction of batteries to the system makes the energy more valuable, since batteries are heavy and costly compared to a diesel tank. Therefore, it is commercially viable to invest in the hydraulic system. This thesis revolves around the heart of the hydraulic system, that also is the root of all evil. That is the pump. Traditionally, a pump has had either a fixed displacement or a continuously variable displacement. Here, the focus is on something in between, namely a pump with discrete displacement. The idea of discrete displacement is far from unique, but has not been investigated in detail in combination with variable speed before. In this thesis, a novel design for a quiet pump with discrete displacement is presented and analysed. The results show that discrete displacement is relevant from an energy perspective for machines working extensively at high pressure levels and with low flow rates, and that a few discrete values are enough to make a significant difference. However, for other cycles, the possible energy gains are very limited, but the discrete displacement can be a valuable feature if downsizing the electric machine is of interest.

Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2020 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2020-10-18 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2020, held on October 21-23, 2020, in Trzebieszowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, and new materials in design of hydraulic components. A special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.

Download or read book Advances in Hydraulic and Pneumatic Drives and Control 2023 written by Jarosław Stryczek and published by Springer Nature. This book was released on 2023-09-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and technical achievements in the field of hydraulic drives. The chapters, selected from contributions presented at the International Scientific-Technical Conference on Hydraulic and Pneumatic Drives and Controls, NSHP 2023, held on October 11-13, 2023, in Piechowice, Poland, cover a wide range of topics such as theoretical advances in fluid technology, work machines in mining, construction, marine and manufacturing industry, and practical issues relating to the application and operation of hydraulic drives. Further topics include: safety and environmental issues associated with the use of machines with hydraulic drive, designing test stands with hydraulic and pneumatic components, advancing control of hydraulic systems, analyzing vibration issues, application of renewable energy sources, and new materials in the design of hydraulic components. Special emphasis is given to new solutions for hydraulic components and systems as well as to the identification of phenomena and processes occurring during the operation of hydraulic and pneumatic systems.

Download or read book Engineering Fluid Dynamics 2019 2020 written by Bjørn H. Hjertager and published by MDPI. This book was released on 2021-02-25 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the successful submissions to a Special Issue of Energies entitled “Engineering Fluid Dynamics 2019–2020”. The topic of engineering fluid dynamics includes both experimental and computational studies. Of special interest were submissions from the fields of mechanical, chemical, marine, safety, and energy engineering. We welcomed original research articles and review articles. After one-and-a-half years, 59 papers were submitted and 31 were accepted for publication. The average processing time was about 41 days. The authors had the following geographical distribution: China (15); Korea (7); Japan (3); Norway (2); Sweden (2); Vietnam (2); Australia (1); Denmark (1); Germany (1); Mexico (1); Poland (1); Saudi Arabia (1); USA (1); Serbia (1). Papers covered a wide range of topics including analysis of free-surface waves, bridge girders, gear boxes, hills, radiation heat transfer, spillways, turbulent flames, pipe flow, open channels, jets, combustion chambers, welding, sprinkler, slug flow, turbines, thermoelectric power generation, airfoils, bed formation, fires in tunnels, shell-and-tube heat exchangers, and pumps.

Download or read book Proceedings of the ASME BATH Symposium on Fluid Power and Motion Control 2015 written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Flow Control Processes in Micro Scale written by Bengt Sunden and published by MDPI. This book was released on 2020-12-29 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, microfluidic devices with a large surface-to-volume ratio have witnessed rapid development, allowing them to be successfully utilized in many engineering applications. A smart control process has been proposed for many years, while many new innovations and enabling technologies have been developed for smart flow control, especially concerning “smart flow control” at the microscale. This Special Issue aims to highlight the current research trends related to this topic, presenting a collection of 33 papers from leading scholars in this field. Among these include studies and demonstrations of flow characteristics in pumps or valves as well as dynamic performance in roiling mill systems or jet systems to the optimal design of special components in smart control systems.

Download or read book Advanced Manufacturing Processes V written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2023-08-30 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between design, manufacturing, materials, mechanical and process engineering, and quality assurance. It covers various manufacturing processes, such as grinding, milling, broaching, and gear machining, including additive manufacturing, vibrational-centrifugal strengthening, laser-ultrasonic surface hardening, and antifriction coatings. It focuses on computer and numerical simulation, mathematical and integrated process modeling, parametric synthesis, virtual prototyping, automatic control, design of manufacturing, mechanical and mechatronics systems. It describes innovative cutting and abrasive processes and combined technologies. It also covers the formation, strengthening, and thermomechanical rolling. It also investigates the temperature field behavior, thermal stability, wear resistance, and other processes of various materials. Gathering the best papers presented at the 5th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2023), held on September 5–8, 2023, in Odessa, Ukraine, this book provides a comprehensive and up-to-date examination of design, manufacturing, mechanical, materials, and process engineering, as well as quality assurance trends and technologies. Yet, it also aims at fostering international and interdisciplinary communication and collaborations, offering a bridge between the academic and industrial sector.

Download or read book Next Generation Cyber Physical Microgrid Systems written by O.V. Gnana Swathika and published by Elsevier. This book was released on 2024-02-23 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next-Generation Cyber-Physical Microgrid Systems: A Practical Guide to Communication Technologies and Resilience presents the opportunities and challenges of using communication network technology to integrate distributed generation systems into microgrids. Working their way through case studies and theoretical strategies, the global range of authors analyze the particular needs of different system structures, including DC, AC-DC and hybrid microgrids, island-bound or grid-connected systems, and case studies in wind power and photovoltaic systems. Risks arising from the communication networks are addressed in detail, with strategies covered including modelling, cyber-physical security set-ups, applications of blockchain, demand-response analyses, and the impact and mitigation of cyber-attacks. Power-electronics interfaces for the integration of these technologies are demonstrated and explained. With a wealth of real-world, practical advice for the implementation and protection of these communication strategies, Next-Generation Cyber-Physical Microgrid Systems will be a useful resource for researchers and industry professionals developing the sustainable energy systems of the future. - Provides a practical reference for resilience in the cyber-physical microgrid with distributed and renewable integration - Summarizes the opportunities and challenges arising from the implementation of communication technologies - Includes simulations, models, case studies, and test codes to maximize practical application for students and professionals

Download or read book Lubrication Degradation written by Sanya Mathura and published by CRC Press. This book was released on 2021-12-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the topics of Root Cause Analysis (RCA) and Lubrication Degradation Mechanisms (LDM) with the goal of allowing the reader to develop the disciplined thought process for getting to the root causes of each of the degradation mechanisms. This new way of thinking can be applied to other areas within their facility to mitigate or eliminate any future recurrence. Lubrication Degradation: Getting into the Root Causes strives to break down the complex topic of Lubrication Degradation into its six most common failure mechanisms. It presents the mechanisms as manageable components and then teaches the reader how to identify the typical root causes associated with each failure mechanism. The main aim of this book is to get the audience to look past the physical root causes and really unearth the underlying human and/or systemic roots to prevent recurrence of these types of failures. The book offers a field-proven and practical root cause analysis approach. An ideal practical book for industry professionals involved with Plant Operations, Engineering, Management, Maintenance, Reliability, Quality, and also useful for Technicians.

Download or read book Boundary Elements and other Mesh Reduction Methods XLIV written by A. H.-D. Cheng and published by WIT Press. This book was released on 2021-08-31 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The maturity of BEM over the last few decades has resulted in a substantial number of industrial applications of the method; this demonstrates its accuracy, robustness and ease of use. The range of applications still needs to be widened, taking into account the potentialities of the Mesh Reduction techniques in general. Theoretical developments and new formulations have been reported over the last few decades, helping to expand the range of boundary elements and other mesh reduction methods (BEM/MRM) applications as well as the type of modelled materials in response to the requirements of contemporary industrial and professional environments. As design, analysis and manufacture become more integrated, the chances are that software users will be less aware of the capabilities of the analytical techniques that are at the core of the process. This reinforces the need to retain expertise in certain specialised areas of numerical methods, such as BEM/MRM, to ensure that all new tools perform satisfactorily within the aforementioned integrated process. The papers included were presented at the 44th International Conference on Boundary Elements and other Mesh Reduction Methods and report advances in techniques that reduce or eliminate the type of meshes associated with finite elements or finite differences.

Download or read book Proceedings of IncoME V CEPE Net 2020 written by Dong Zhen and published by Springer Nature. This book was released on 2021-05-15 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of condition monitoring, plant maintenance and reliability, as presented by leading international researchers and engineers at the 5th International Conference on Maintenance Engineering and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network (IncoME-V & CEPE Net-2020), held in Zhuhai, China on October 23-25, 2020. Topics include vibro-acoustics monitoring, condition-based maintenance, sensing and instrumentation, machine health monitoring, maintenance auditing and organization, non-destructive testing, reliability, asset management, condition monitoring, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Mechatronics and Automation Technology written by J.-Y. Xu and published by IOS Press. This book was released on 2024-02-27 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics and automation technology has led to technological change and innovation in all engineering fields, affecting various disciplines, including machine technology, electronics, and computing. It plays a vital role in improving production efficiency, reducing energy consumption and improving product quality and safety, and will be central to the further advancement of technology and industry, bringing convenience and innovation to even more areas. This book presents the proceedings of ICMAT 2023, the 2nd International Conference on Mechatronics and Automation Technology, held as a virtual event on 27 October 2023. The aim of the conference was to provide a platform for scientists, scholars, engineers and researchers from universities and scientific institutes around the world to share the latest research achievements in mechatronics and automation technology, explore key challenges and research directions, and promote the development and application of theory and technology in this field. A total of 121 submissions were received for the conference, of which 77 were ultimately accepted after a rigorous peer-review process. The papers cover a wide range of topics falling within the scope of mechatronics and automation technology, including smart manufacturing; digital manufacturing; additive manufacturing; robotics; sensors; control; electronic and electrical engineering; intelligent systems; and automation technology, as well as other related fields. Providing an overview of recent developments in mechatronics and automation technology, the book will be of interest to all those working in the field.

Download or read book Hydraulic Fluid Power written by Andrea Vacca and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: HYDRAULIC FLUID POWER LEARN MORE ABOUT HYDRAULIC TECHNOLOGY IN HYDRAULIC SYSTEMS DESIGN WITH THIS COMPREHENSIVE RESOURCE Hydraulic Fluid Power provides readers with an original approach to hydraulic technology education that focuses on the design of complete hydraulic systems. Accomplished authors and researchers Andrea Vacca and Germano Franzoni begin by describing the foundational principles of hydraulics and the basic physical components of hydraulics systems. They go on to walk readers through the most practical and useful system concepts for controlling hydraulic functions in modern, state-of-the-art systems. Written in an approachable and accessible style, the book’s concepts are classified, analyzed, presented, and compared on a system level. The book also provides readers with the basic and advanced tools required to understand how hydraulic circuit design affects the operation of the equipment in which it’s found, focusing on the energy performance and control features of each design architecture. Readers will also learn how to choose the best design solution for any application. Readers of Hydraulic Fluid Power will benefit from: Approaching hydraulic fluid power concepts from an “outside-in” perspective, emphasizing a problem-solving orientation Abundant numerical examples and end-of-chapter problems designed to aid the reader in learning and retaining the material A balance between academic and practical content derived from the authors’ experience in both academia and industry Strong coverage of the fundamentals of hydraulic systems, including the equations and properties of hydraulic fluids Hydraulic Fluid Power is perfect for undergraduate and graduate students of mechanical, agricultural, and aerospace engineering, as well as engineers designing hydraulic components, mobile machineries, or industrial systems.

Download or read book Mobile Working Machines written by Marcus Geimer and published by SAE International. This book was released on 2020-12-31 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile Working Machines are defined by three characteristics. These machines have a cer-tain task of doing a working process, they are mobile, and they have a signifi cant energy share in their working functions. The machines should be as productive, efficient and of high quality as possible. All these machines in the fi eld of agriculture, forestry, construction, logistics, municipal sector, and in other special applications work in different applications. But, many technologies placed in the machines are the same, similar or comparable; therefore, different branches can learn from each other. Mobile Working Machines provides a wide and deep view into the technologies used in these machines. Appropriate for new engineers as well as those who wish to increase their knowledge in this field, this book brings together all the latest research and development into one place.

Download or read book INDEPENDENT METERING SYSTEM WITH ELECTRO HYDRAULIC CONTROL written by Min Cheng and published by Springer Nature. This book was released on 2024 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows an independent metering electro-hydraulic control system involving its flexible hardware layouts, complex software control, representative products and applications. The book includes one chapter introducing the background and motivation of the independent metering electro-hydraulic control system. It also includes one chapter to summarize various hardware layouts involving the utilized hydraulic components and circuits, as well as analyze their advantages and disadvantages. It emphatically consists of four chapters demonstrating the detailed multivariable control strategies from three levels: load, valve and pump, together with fault-tolerant control under the fault condition. It includes a last chapter, in which products of independent metering control valve and their applications in some typical heavy-duty mobile machinery are collective works of reviews illustrative of recent advances. This book is interesting and useful to a wide readership in the various fields of fluid power transmission and control.

Download or read book Novel Industry 4 0 Technologies and Applications written by Nikolaos Papakostas and published by MDPI. This book was released on 2020-11-25 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industry 4.0 paradigm has led to the creation of new opportunities for taking advantage of a set of diverse technologies in the manufacturing domain. This book touches on a series of advanced technologies and research fields, including Internet of Things, Augmented and Virtual Reality, Machine Learning, Advanced Robotics, Additive Manufacturing, System and Process Simulation, Computer-Aided Design/Engineering/Manufacturing/Process Planning Systems as well as Product Lifecycle Management Platforms. The topics covered span a series of diverse areas related to a) product design and development, b) manufacturing systems and operations, c) process engineering, and d) Industry 4.0 technologies review and realization.

Download or read book Materials Structures and Manufacturing for Aircraft written by Melih Cemal Kuşhan and published by Springer Nature. This book was released on 2022-04-25 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive look at materials science topics in aerospace, air vehicle structures and manufacturing methods for aerospace products, examining recent trends and new technological developments. Coverage includes additive manufacturing, advanced material removal operations, novel wing systems, design of landing gear, eco-friendly aero-engines, and light alloys, advanced polymers, composite materials and smart materials for structural components. Case studies and coverage of practical applications demonstrate how these technologies are being successfully deployed. Materials, Structures & Manufacturing for Aircraft will appeal to a broad readership in the aviation community, including students, engineers, scientists, and researchers, as a reference source for material science and modern production techniques.