Download or read book Proceedings of the ASME Summer Heat Transfer Summer Conference 2016 Heat transfer in multiphase systems Gas turbine heat transfer Manufacturing and materials processing Heat transfer in electronic equipment Heat and mass transfer in biotechnology Heat transfer under extreme conditions Computational heat transfer Heat transfer visualization gallery General papers Multiphase flow and heat transfer Transport phenomena in manufacturing and materials processing written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers
Download or read book Food Process Engineering and Technology written by Zeki Berk and published by Academic Press. This book was released on 2013-06-08 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the establishment of food engineering both as an academic discipline and as a profession. Combining scientific depth with practical usefulness, this book serves as a tool for graduate students as well as practicing food engineers, technologists and researchers looking for the latest information on transformation and preservation processes as well as process control and plant hygiene topics. Strong emphasis on the relationship between engineering and product quality/safety Links theory and practice Considers topics in light of factors such as cost and environmental issues
Download or read book Heat Pipe Science And Technology written by Amir Faghri and published by Global Digital Press. This book was released on 1995-03 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents basic and advanced techniques in the analytical and numerical modeling of various heat pipe systems under a variety of operating conditions and limitations. It describes the variety of complex and coupled processes of heat and mass transfer in heat pipes. The book consists of fourteen chapters, two appendices, and over 400 illustrations, along with numerous references and a wide variety of technical data on heat pipes.
Download or read book Computational Heat Transfer written by Yogesh Jaluria and published by Routledge. This book was released on 2017-10-19 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition updated the material by expanding coverage of certain topics, adding new examples and problems, removing outdated material, and adding a computer disk, which will be included with each book. Professor Jaluria and Torrance have structured a text addressing both finite difference and finite element methods, comparing a number of applicable methods.
Download or read book Handbook of Microalgae Based Processes and Products written by Eduardo Jacob-Lopes and published by Academic Press. This book was released on 2020-07-23 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Microalgae-based Processes and Products provides a complete overview of all aspects involved in the production and utilization of microalgae resources at commercial scale. Divided into four parts (fundamentals, microalgae-based processes, microalgae-based products, and engineering approaches applied to microalgal processes and products), the book explores the microbiology and metabolic aspects of microalgae, microalgal production systems, wastewater treatment based in microalgae, CO2 capture using microalgae, microalgae harvesting techniques, and extraction and purification of biomolecules from microalgae. It covers the largest number of microalgal products of commercial relevance, including biogas, biodiesel, bioethanol, biohydrogen, single-cell protein, single-cell oil, biofertilizers, pigments, polyunsaturated fatty acids, bioactive proteins, peptides and amino acids, bioactive polysaccharides, sterols, bioplastics, UV-screening compounds, and volatile organic compounds. Moreover, it presents and discusses the available engineering tools applied to microalgae biotechnology, such as process integration, process intensification, and techno-economic analysis applied to microalgal processes and products, microalgal biorefineries, life cycle assessment, and exergy analysis of microalgae-based processes and products. The coverage of a broad range of potential microalgae processes and products in a single volume makes this handbook an indispensable reference for engineering researchers in academia and industry in the fields of bioenergy, sustainable development, and high-value compounds from biomass, as well as graduate students exploring those areas. Engineering professionals in bio-based industries will also find valuable information here when planning or implementing the use of microalgal technologies. Covers theoretical background information and results of recent research. Discusses all commercially relevant microalgae-based processes and products. Explores the main emerging engineering tools applied to microalgae processes, including techno-economic analysis, process integration, process intensification, life cycle assessment, and exergy analyses.
Download or read book Intensification of Biobased Processes written by Andrzej Górak and published by Royal Society of Chemistry. This book was released on 2018-06-18 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years bioprocessing has increased in popularity and importance, however, bioprocessing still poses various important techno-economic and environmental challenges, such as product yields, excessive energy consumption for separations in highly watery systems, batch operation or the downstream processing bottlenecks in the production of biopharmaceutical products. Many of those challenges can be addressed by application of different process intensification technologies discussed in the present book. The first book dedicated entirely to this area, Intensification of Biobased Processes provides a comprehensive overview of modern process intensification technologies used in bioprocessing. The book focusses on four different categories of biobased products: bio-fuels and platform chemicals; cosmeceuticals; food products; and polymers and advanced materials. It will cover various intensification aspects of the processes concerned, including (bio)reactor intensification; intensification of separation, recovery and formulation operations; and process integration. This is an invaluable source of information for researchers and industrialists working in chemical engineering, biotechnology and process engineering.
Download or read book Decision Based Learning written by Nancy Wentworth and published by Emerald Group Publishing. This book was released on 2021-09-16 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book you will read stories told by faculty who have redesigned their university courses using the Decision-Based Learning pedagogy and the impact this powerful strategy can have on student learning. It should be of use to anyone teaching and designing curricula in higher education settings.
Download or read book Principles of Solar Gas Turbines for Electricity Generation written by Amos Madhlopa and published by Springer. This book was released on 2018-05-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to solar gas turbines, providing fundamental knowledge and state-of-the-art developments in the field. A gas turbine is a heat engine in which a mixture of fuel and air is burned in a chamber that is an integral part of the flow circuit of the working fluid. The burnt gas mixture expands and turns the turbine, which can be connected to a generator for electricity production. Solar gas turbines offer an important alternative to conventional gas turbines driven by non-renewable, polluting fossil fuels such as diesel or natural gas. The book provides a comprehensive overview of the topic as well as numerous illustrations.
Download or read book Energy Conversion written by D. Yogi Goswami and published by CRC Press. This book was released on 2017-07-06 with total page 1193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook surveys the range of methods and fuel types used in generating energy for industry, transportation, and heating and cooling of buildings. Solar, wind, biomass, nuclear, geothermal, ocean and fossil fuels are discussed and compared, and the thermodynamics of energy conversion is explained. Appendices are provided with fully updated data. Thoroughly revised, this second edition surveys the latest advances in energy conversion from a wide variety of currently available energy sources. It describes energy sources such as fossil fuels, biomass (including refuse-derived biomass fuels), nuclear, solar radiation, wind, geothermal, and ocean, then provides the terminology and units used for each energy resource and their equivalence. It includes an overview of the steam power cycles, gas turbines, internal combustion engines, hydraulic turbines, Stirling engines, advanced fossil fuel power systems, and combined-cycle power plants. It outlines the development, current use, and future of nuclear power.
Download or read book Advances in Industrial Mixing written by Suzanne M. Kresta and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.
Download or read book Engineering the Everyday and the Extraordinary written by American Society of Mechanical Engineers and published by Amer Society of Mechanical. This book was released on 2015 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a companion book to the permanent exhibit of the same name at ASME's new headquarters, Engineering the Everyday and the Extraordinary celebrates engineering achievements and their impact on everyday life. The exhibit is made up of 80 rotatable triangular modules, each one telling an engineering story with a brief overview, a strong central image and a patent drawing or illustration, covering nine major domains of engineering. The size and scope of the exhibit makes it an experience that can be visited many times, with each visit inspiring something new. Engineering the Everyday and the Extraordinary invites us to rediscover the remarkable - the engineers and inventions that have shaped our world as well as the extraordinary breakthroughs that are already setting the stage for the future. The exhibit's striking photographs, crisp diagrams and engaging content are presented in a beautifully designed, colorful format. From the Foreword by the renowned engineering historian Henry Petroski, who curated the exhibit, to the final pages, the book sparkles with engineering accomplishments, large and small.
Download or read book Transport Phenomena Data Companion written by L. P. B. M. Janssen and published by Hodder Education. This book was released on 1987 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Thermoelectrics written by D.M. Rowe and published by CRC Press. This book was released on 2018-12-07 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectrics is the science and technology associated with thermoelectric converters, that is, the generation of electrical power by the Seebeck effect and refrigeration by the Peltier effect. Thermoelectric generators are being used in increasing numbers to provide electrical power in medical, military, and deep space applications where combinations of their desirable properties outweigh their relatively high cost and low generating efficiency. In recent years there also has been an increase in the requirement for thermoelectric coolers (Peltier devices) for use in infrared detectors and in optical communications. Information on thermoelectrics is not readily available as it is widely scattered throughout the literature. The Handbook centralizes this information in a convenient format under a single cover. Sixty of the world's foremost authorities on thermoelectrics have contributed to this Handbook. It is comprised of fifty-five chapters, a number of which contain previously unpublished material. The contents are arranged in eight sections: general principles and theoretical considerations, material preparation, measurement of thermoelectric properties, thermoelectric materials, thermoelectric generation, generator applications, thermoelectric refrigeration, and applications of thermoelectric cooling. The CRC Handbook of Thermoelectrics has a broad-based scope. It will interest researchers, technologists, and manufacturers, as well as students and the well-informed, non-specialist reader.
Download or read book Aeration Mixing and Energy written by Diego Rosso and published by IWA Publishing. This book was released on 2018-12-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeration, Mixing, and Energy: Bubbles and Sparks is the first book on bubbles and sparks, presenting the state-of-the-art on aeration and mixing technology for water and wastewater treatment systems. Aeration and mixing are the heart of wastewater treatment and must be performed well and at high efficiency for successful treatment. After reviewing the most current aeration systems, this book presents the best ways of measuring aeration system performance and to use those measurements for design, control, and sustainable operations. A team of experts in the field were assembled to help write this book, which is the product of several years of work and decades of combined experience. Aeration, Mixing, and Energy: Bubbles and Sparks is a valuable complement to any book on water reclamation and wastewater treatment.
Download or read book Enhanced Boiling Heat Transfer written by John R. Thome and published by CRC Press. This book was released on 1990-01-01 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive survey of boiling heat transfer augmentation, one of the most dynamic areas in the field. The text covers fundamental aspects of boiling augmentation and provides an in-depth treatment of enhanced boiling surface applications in industry.
