Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro and Opto Electronic Materials and Structures Physics Mechanics Design Reliability Packaging written by Ephraim Suhir and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 1471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides the most comprehensive, up-to-date and easy-to-apply information on the physics, mechanics, reliability and packaging of micro- and opto-electronic materials. It details their assemblies, structures and systems, and each chapter contains a summary of the state-of-the-art in a particular field. The book provides practical recommendations on how to apply current knowledge and technology to design and manufacture. It further describes how to operate a viable, reliable and cost-effective electronic component or photonic device, and how to make such a device into a successful commercial product.

Download or read book Moisture Sensitivity of Plastic Packages of IC Devices written by X.J. Fan and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Moisture Sensitivity of Plastic Packages of IC Devices provides information on the state-of-the-art techniques and methodologies related to moisture issues in plastic packages. The most updated, in-depth and systematic technical and theoretical approaches are addressed in the book. Numerous industrial applications are provided, along with the results of the most recent research and development efforts, including, but not limited to: thorough exploration of moisture's effects based on lectures and tutorials by the authors, consistent focus on solution-based approaches and methodologies for improved reliability in plastic packaging, emerging theories and cutting-edge industiral applications presented by the leading professionals in the field. Moisture plays a key role in the reliability of plastic packages of IC devices, and moisture-induced failures have become an increasing concern with the development of advanced IC devices. This second volume in the Micro- and Opto-Electronic Materials, Structures, and Systems series is a must-read for researchers and engineers alike.

Download or read book Sensor Technologies for Civil Infrastructures Volume 2 written by Jerome P. Lynch and published by Elsevier. This book was released on 2014-05-19 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors are used for civil infrastructure performance assessment and health monitoring, and have evolved significantly through developments in materials and methodologies. Sensor Technologies for Civil Infrastructure Volume II provides an overview of sensor data analysis and case studies in assessing and monitoring civil infrastructures. Part one focuses on sensor data interrogation and decision making, with chapters on data management technologies, data analysis, techniques for damage detection and structural damage detection. Part two is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. Sensor Technologies for Civil Infrastructure provides a standard reference for structural and civil engineers, electronics engineers, and academics with an interest in the field. - Provides an in-depth examination of sensor data management and analytical techniques for fault detection and localization, looking at prognosis and life-cycle assessment - Includes case studies in assessing structures such as bridges, buildings, super-tall towers, dams, tunnels, wind turbines, railroad tracks, nuclear power plants, offshore structures, levees, and pipelines

Download or read book Fundamentals Properties and Applications of Polymer Nanocomposites written by Joseph H. Koo and published by Cambridge University Press. This book was released on 2016-10-31 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused primarily on polymer nanocomposites, based on the author's research experience as well as open literature. The environmental health and safety aspects of nanomaterials and polymer nanocomposites, risk assessment and safety standards, and fire toxicity of polymer nanocomposites, are studied. In the final chapter, a brief overview of opportunities, trends, and challenges of polymer nanocomposites are included. Throughout the book, the theme is developed that polymer nanocomposites are a whole family of polymeric materials whose properties are capable of being tailored to meet specific applications. This volume serves as a general introduction to students and researchers just entering the field and to scholars from other subfields seeking information.

Download or read book Design Optimisation and Validation of Phononic Crystal Plates for Manipulation of Elastodynamic Guided Waves written by Saeid Hedayatrasa and published by Springer. This book was released on 2018-01-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis proposes novel designs of phononic crystal plates (PhPs) allowing ultra-wide controllability frequency ranges of guided waves at low frequencies, with promising structural and tunability characteristics. It reports on topology optimization of bi-material-layered (1D) PhPs allowing maximized relative bandgap width (RBW) at target filling fractions and demonstrates multiscale functionality of gradient PhPs. It also introduces a multi-objective topology optimization method for 2D porous PhPs allowing both maximized RBW and in-plane stiffness and addresses the critical role of considering stiffness in designing porous PhPs. The multi-objective topology optimization method is then expanded for designing 2D porous PhPs with deformation induced tunability. A variety of innovative designs are introduced which their maximized broadband RBW is enhanced by, is degraded by or is insensitive to external finite deformation. Not only does this book address the challenges of new topology optimization methods for computational design of phononic crystals; yet, it demonstrated the suitability and applicability of the topological designs by experimental validation. Furthermore, it offers a comprehensive review of the existing optimization-based approaches for the design of finite non-periodic acoustic metamaterial structures, acoustic metamaterial lattice structures and acoustic metamaterials under perfect periodicity.

Download or read book Recent Advances in Robust Control written by Andreas Müller and published by BoD – Books on Demand. This book was released on 2011-11-07 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust control has been a topic of active research in the last three decades culminating in H_2/H_\infty and \mu design methods followed by research on parametric robustness, initially motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other more recent methods. The two volumes of Recent Advances in Robust Control give a selective overview of recent theoretical developments and present selected application examples. The volumes comprise 39 contributions covering various theoretical aspects as well as different application areas. The first volume covers selected problems in the theory of robust control and its application to robotic and electromechanical systems. The second volume is dedicated to special topics in robust control and problem specific solutions. Recent Advances in Robust Control will be a valuable reference for those interested in the recent theoretical advances and for researchers working in the broad field of robotics and mechatronics.

Download or read book Integrative Production Technology for High Wage Countries written by Christian Brecher and published by Springer Science & Business Media. This book was released on 2011-12-19 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of the industrial production sector.

Download or read book Sustainable Manufacturing written by Günther Seliger and published by Springer Science & Business Media. This book was released on 2012-06-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, and adhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.

Download or read book Convective Flow and Heat Transfer from Wavy Surfaces written by Aroon Shenoy and published by CRC Press. This book was released on 2016-10-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convective Flow and Heat Transfer from Wavy Surfaces: Viscous Fluids, Porous Media, and Nanofluids addresses the wavy irregular surfaces in heat transfer devices. Fluid flow and heat transfer studies from wavy surfaces have received attention, since they add complexity and require special mathematical techniques. This book considers the flow and heat transfer characteristics from wavy surfaces, providing an understanding of convective behavioral changes.

Download or read book Miniature Joule Thomson Cryocooling written by Ben-Zion Maytal and published by Springer Science & Business Media. This book was released on 2012-09-18 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first in English being entirely dedicated to Miniature Joule-Thomson Cryocooling. The category of Joule-Thomson (JT) cryocoolers takes us back to the roots of cryogenics, in 1895, with figures like Linde and Hampson. The "cold finger" of these cryocoolers is compact, lacks moving parts, and sustains a large heat flux extraction at a steady temperature. Potentially, they cool down unbeatably fast. For example, cooling to below 100 K (minus 173 Celsius) might be accomplished within only a few seconds by liquefying argon. A level of about 120 K can be reached almost instantly with krypton. Indeed, the species of coolant plays a central role dictating the size, the intensity and the level of cryocooling. It is the JT effect that drives these cryocoolers and reflects the deviation of the "real" gas from the ideal gas properties. The nine chapters of the book are arranged in five parts. •The Common Principle of Cyrocoolers shared across the broad variety of cryocooler types •Theoretical Aspects: the JT effect and its inversion, cooling potential of coolants, the liquefaction process, sizing of heat exchangers, level of pressurization, discharge of pressure vessels • Practical Aspects: modes of operation (fast cooldown, continuous, multi-staging, hybrid cryocoolers), pressure sources, configuration, construction and technologies, flow adjustment, MEMS, open and closed cycle, cooldown process and similarity, transient behavior • Mixed Coolant cryocooling: theory, practice and applications • Special Topics: real gas choked flow rates, gas purity, clog formation, optimal fixed orifice, modeling, cryosurgical devices, warming by the inverse JT effect The theoretical aspects may be of interest not only to those working with cryocoolers but also for others with a general interest in "real" gas thermodynamics, such as, for example, the inversion of the JT effect in its differential and integral forms, and the exceptional behavior of the quantum gases. A detailed list of references for each chapter comprises a broad literature survey. It consists of more than 1,200 relevant publications and 450 related patents. The systematically organized content, arranged under a thorough hierarchy of headings, supported by 227 figures and 41 tables, and accompanied by various chronological notes of evolution, enables readers a friendly interaction with the book. Dr. Ben-Zion Maytal is a Senior Researcher at Rafael-Advanced Defense Systems, Ltd., and an Adjunct Senior Teaching Fellow at the Technion-Israel Institute of Technology, Haifa, Israel. Prof. John M. Pfotenhauer holds a joint appointment in the Departments of Mechanical Engineering and Engineering Physics at the University of Wisconsin - Madison.

Download or read book Microrobotics for Micromanipulation written by Nicolas Chaillet and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microrobotics is an emerging and booming area with many and various applications, including in fields such as industrial/manufacturing robotics, medical robotics, and laboratory instrumentation. Microrobotics for Micromanipulation presents for the first time, in detail, a treatment of the field of robotics dedicated to handling objects of micrometer dimensions. At these dimensions, the behavior of objects is significantly different from the better known, larger scales, which leads to implementation techniques that can be radically different from the more commonly used solutions. This book details the behaviors of objects at the micrometer scale and provides robotics solutions that are suitable, in terms of actuators, grippers, manipulators, environmental perception, and microtechnology. Worked examples are included in the book - enabling engineers, students and researchers to familiarize themselves with this emerging area and to contribute to its development.

Download or read book Green Design and Manufacturing for Sustainability written by Nand K. Jha and published by CRC Press. This book was released on 2015-12-02 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook integrates green design and manufacturing within the framework of sustainability, emphasizing cost, recyclables, and reuse. This book includes the analytical techniques for cost minimization, reduction of material waste, and the reduction of energy consumption during the manufacturing process. All aspects of green design, economics, feasible material selection, and relevant and efficient manufacturing processes are presented. Techniques including life cycle cost assessment, reuse, and recyclables are showcased with examples and problems solved.

Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-07-24 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.

Download or read book American Society for Composites American Society for Testing And Materials Committee D30 written by Erian Armanios and published by DEStech Publications, Inc. This book was released on 2004-10 with total page 1464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the recent developments in the fundamental understanding of composites; important information for researchers and composite scientists.

Download or read book Intelligent Systems for Knowledge Management written by Edward Szczerbicki and published by Springer Science & Business Media. This book was released on 2009-09-30 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: New approaches are needed that could move us towards developing effective systems for problem solving and decision making, systems that can deal with complex and ill-structured situations, systems that can function in information rich environments, systems that can cope with imprecise information, systems that can rely on their knowledge and learn from experience - i.e. intelligent systems. One of the main efforts in intelligent systems development is focused on knowledge and information management which is regarded as the crucial issue in smart decision making support. The 13 Chapters of this book represent a sample of such effort. The overall aim of this book is to provide guidelines to develop tools for smart processing of knowledge and information. Still, the guide does not presume to give ultimate answers. Rather, it poses ideas and case studies to explore and the complexities and challenges of modern knowledge management issues. It also encourages its reader to become aware of the multifaceted interdisciplinary character of such issues. The premise of this book is that its reader will leave it with a heightened ability to think - in different ways - about developing, evaluating, and supporting intelligent knowledge and information management systems in real life based environment.