Download or read book Numerical Modelling of Construction Processes in Geotechnical Engineering for Urban Environment written by Theodoros Triantafyllidis and published by CRC Press. This book was released on 2006-02-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has become increasingly important, particularly in an urban environment, to predict soil behaviour and to confine the settlement or deformation of buildings adjacent to construction sites. One important factor is the choice of construction procedure for the installation of piles, sheet pile walls, anchors or for soil improvement techniques, ground freezing and tunnelling methods. The modelling of construction processes, which are frequently associated with large deformations of the soil and with strong changes in the structure of the soil around the construction plant, in the case of, for example, a drill, a bit, a vibrator, or an excavation tool, requires sophisticated and new methods in numerical modelling. Often the simulation of the construction procedure is neglected in the calculations. Such methods are described and discussed in this book, as are examples of the methods applied to geotechnical practice, field and laboratory testing as well as case studies. This volume provides a valuable source of reference for scientists in geotechnical engineering and numerical modelling, geotechnical engineers, post graduate students, construction companies and consultants, manufacturers of geotechnical construction plants and software suppliers and developers of geotechnical construction methods.

Download or read book Cooperative Design Visualization and Engineering written by Yuhua Luo and published by Springer Science & Business Media. This book was released on 2004-09-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Cooperative Design, Visualization, and Engineering, CDVE 2004, held in Palma de Mallorca, Spain, in September 2004. The 28 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers address all current issues in cooperative design, visualization, and engineering, ranging from theoretical and methodological topics to various systems and frameworks to applications in a variety of fields.

Download or read book eWork and eBusiness in Architecture Engineering and Construction written by Attila Dikbas and published by Taylor & Francis. This book was released on 2004-08-15 with total page 1167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biannually since 1994, the European Conference on Product and Process Modelling in the Building and Construction Industry has provided a review of research, given valuable future work outlooks, and provided a communication platform for future co-operative research and development at both European and global levels.This volume, of special interest t

Download or read book Electrorheological Fluids And Magnetorheological Suspensions Ermr 2004 Proceedings Of The Ninth International Conference written by Kunquan Lu and published by World Scientific. This book was released on 2005-06-14 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers the most recent progress of research work on electrorheological (ER) and magnetorheological (MR) industrial applications related to controllable damping, ER/MR fundamental mechanisms, and understanding the potential of new classes of field responsive materials.The proceedings have been selected for coverage in:• Materials Science Citation Index®• Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)• Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)• CC Proceedings — Engineering & Physical Sciences

Download or read book eWork and eBusiness in Architecture Engineering and Construction written by Z. Turk and published by CRC Press. This book was released on 2002-01-01 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive review of research related to construction informatics, with a particular focus on the related 5th framework EU projects on product and process technology and the implementation of the new economy technologies and business models in the construction industry.

Download or read book Advances in Informatics and Computing in Civil and Construction Engineering written by Ivan Mutis and published by Springer. This book was released on 2018-10-08 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume chronicles the papers presented at the 35th CIB W78 2018 Conference: IT in Design, Construction, and Management, held in Chicago, IL, USA, in October 2018. The theme of the conference focused on fostering, encouraging, and promoting research and development in the application of integrated information technology (IT) throughout the life-cycle of the design, construction, and occupancy of buildings and related facilities. The CIB – International Council for Research and Innovation in Building Construction – was established in 1953 as an association whose objectives were to stimulate and facilitate international cooperation and information exchange between governmental research institutes in the building and construction sector, with an emphasis on those institutes engaged in technical fields of research. The conference brought together more than 200 scholars from 40 countries, who presented the innovative concepts and methods featured in this collection of papers.

Download or read book Mesh Free Methods written by G.R. Liu and published by CRC Press. This book was released on 2002-07-29 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we attempt to solve engineering problems of ever increasing complexity, so must we develop and learn new methods for doing so. The Finite Difference Method used for centuries eventually gave way to Finite Element Methods (FEM), which better met the demands for flexibility, effectiveness, and accuracy in problems involving complex geometry. Now,

Download or read book Analysis Design and Construction of Foundations written by Yung Ming Cheng and published by CRC Press. This book was released on 2024-05-28 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Design and Construction of Foundations covers the key concepts in the analysis and design of foundation systems, balancing theory with engineering practice. The book examines in depth the methods used for the analysis, design and construction of shallow foundations, deep foundations, excavation and lateral support systems, slope stability and stabilization and ground monitoring for proper site management. Some new and innovative foundation construction methods are also introduced. It is illustrated with case studies of failures and defects from actual construction projects. This second edition is extensively revised and developed to include a new chapter on numerical methods in geotechnical engineering, as well as a large number of new construction drawings, project photos and construction method statements from existing projects to give the book a stronger professional application and connection to engineering practice. It also covers some new advanced theoretical concepts not covered in other texts, making it useful in both the theoretical and practical aspects. It is ideal for senior undergraduates and graduate students, academics and consulting geotechnical engineers.

Download or read book Slope Stability Analysis and Stabilization written by Y. M. Cheng and published by CRC Press. This book was released on 2014-05-20 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes Recommendations for Analysis, Design Practice, Design Charts, Tables, and More Using a unified approach to address a medley of engineering and construction problems, Slope Stability Analysis and Stabilization: New Methods and Insight, Second Edition provides helpful practical advice and design resources for the practicing engineer. This text examines a range of current methods for the analysis and design of slopes, and details the limitations of both limit equilibrium and the finite element method in the assessment of the stability of a slope. It also introduces a variety of alternative approaches for overcoming numerical non-convergence and the location of critical failure surfaces in two-dimensional and three-dimensional cases. What’s New in the Second Edition: This latest edition builds on the concepts of the first edition and covers the case studies involved in slope stability analysis in greater detail. The book adds a chapter on the procedures involved in performing limit equilibrium analysis, as well as a chapter on the design and construction practice in Hong Kong. It includes more examples and illustrations on the distinct element of slope, the relation between limit equilibrium and plasticity theory, the fundamental connections between slope stability analysis and the bearing capacity problem, as well as the stability of the three-dimensional slope under patch load conditions. Addresses new concepts in three-dimensional stability analysis, finite element analysis, and the extension of slope stability problems to lateral earth pressure problems Offers a unified approach to engineering and construction problems, including slope stability, bearing capacity, and earth pressure behind retaining structures Emphasizes how to translate the conceptual design conceived in the design office into physical implementation on site in a holistic way Discusses problems that were discovered during the development of associated computer programs This text assesses the fundamental assumptions and limitations of stability analysis methods and computer modelling, and benefits students taking an elective course on slope stability, as well as geotechnical engineering professionals specializing in slope stability

Download or read book Cooperative Design Visualization and Engineering written by and published by . This book was released on 2004 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Ninth International Symposium on Consumer Electronics 2005 ISCE 2005 14 16 June 2005 Macau SAR written by Robin Bradbeer and published by Martinus Nijhoff Publishers / Brill Academic Publi. This book was released on 2005 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1998-2003, 2008-2011, 2014- cataloged as a serial in LC.

Download or read book Forthcoming Books written by Rose Arny and published by . This book was released on 2002 with total page 1752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2004 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainability in Engineering Design and Construction written by J. K. Yates and published by CRC Press. This book was released on 2018-09-03 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully Measure the Benefits of Green Design and Construction Sustainability in Engineering Design and Construction outlines the sustainable practices used in engineering design and construction operations for all types of engineering and construction projects. Aimed at ushering the engineering and construction industry into embracing sustainable practices and green construction techniques, this book addresses sustainability in engineering design and construction operations from a historical and global perspective, and delves into specific sustainability concepts and processes. The book explains the concepts of sustainable development, corporate social responsibility (CSR), the Dow Jones Global Sustainability Index (DJGSI), key performance indicators (KPIs), corporate sustainability, and the triple bottom line (economic, environmental, and social values in design and construction). Relevant to sustainability in every facet of engineering and construction, it also covers life-cycle environmental cost analysis, discusses sustainable engineering and site selection, the economic considerations evaluated when making sustainability decisions, and explains how to measure and quantify sustainable performance and apply these practices in the real world. It also covers project and corporate level sustainability practices, sustainable construction materials and processes, sustainable heavy construction equipment, traditional and alternative energy sources, provides implementation resources for starting and evaluating sustainability programs, and includes a checklist for measuring the sustainability of construction operations. The text contains detailed information on sustainable construction materials and processes, heavy construction equipment, and traditional and alternative energy sources. It presents information on sustainable designs, selecting sustainable sites, designing for passive survivability, designing for disassembly, and the ISO 14,000 standards. It provides implementation resources for starting and evaluating sustainability programs and a checklist for measuring the sustainability of construction operations In addition, it provides definitions of sustainability terms and expressions, as well as case studies, examples, discussion questions, and a list of supplemental references at the end of each chapter. This book provides information on: Definitions for sustainability terms Sources for locating global sustainability requirements Current sustainability issues Environmental laws related to sustainability and their implications Sustainable design Life-cycle cost assessment models Sustainable practices currently being used in the engineering and construction (E&C) industry Corporate-level sustainability practices Project-level sustainability practices Global sustainability trends and implications Sustainable materials Sustainable heavy construction equipment Traditional and alternative energy sources LEED Green Building Rating System Sustainability organizations and certification programs Sustainability implementation resources A summary of sustainable engineering design and construction

Download or read book Introduction to Information Retrieval written by Christopher D. Manning and published by Cambridge University Press. This book was released on 2008-07-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Class-tested and coherent, this textbook teaches classical and web information retrieval, including web search and the related areas of text classification and text clustering from basic concepts. It gives an up-to-date treatment of all aspects of the design and implementation of systems for gathering, indexing, and searching documents; methods for evaluating systems; and an introduction to the use of machine learning methods on text collections. All the important ideas are explained using examples and figures, making it perfect for introductory courses in information retrieval for advanced undergraduates and graduate students in computer science. Based on feedback from extensive classroom experience, the book has been carefully structured in order to make teaching more natural and effective. Slides and additional exercises (with solutions for lecturers) are also available through the book's supporting website to help course instructors prepare their lectures.

Download or read book Natural Ventilation in Buildings written by Francis Allard and published by Earthscan. This book was released on 1998 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: AIOLOS is a computational tool for the calculation of the airflow rates in naturally ventilated buildings.