Download or read book Proceedings of the 6th International Conference on Advanced High Strength Steel and Press Hardening ICHSU 2022 written by Yisheng Zhang and published by Springer Nature. This book was released on 2023-04-02 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. The scope of papers is as follows (including but not limited to): Material and process of low temperature hot stamping (heating temperature 750-800°C) Cold stamping technology of advanced high strength steel 1180-1470MPa Technology and application of multi-material forming (mixed forming of carbon fiber composites, steel and aluminum) Laser blanking and defect prevention of advanced high strength steel Process of new coating of high strength steel and prevention of hydrogen embrittlement delayed fracture Research progress of multi-step hot stamping strengthening technology High strength steel/aluminum alloy and light-weight and high performance materials Hot stamping of high-strength steel/high-strength aluminium alloy Stamping and roll forming of high strength steel Cold/hot stamping of tailor-welded blanks Modeling and forming simulation of stamping components Application of advanced high strength steel stamping Material surface condition, friction and lubrication Material coatings, corrosion and corrosion protection Hot stamping Component design and body-in-white Heating and cooling methods and processes Microstructure and phase transition of cold-hot stamping forming material Tooling design and manufacturing Test and evaluation of advanced high strength steel stamping components Laser cutting and welding of advanced high strength steel stamping components Digital and intelligent technology and application of hot stamping forming equipment Lightweight design and advanced high strength steel components forming technology for commercial vehicles Other advanced forming technologies

Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 3rd International Conference On Advanced High Strength Steel And Press Hardening Ichsu2016 written by Zhang Yisheng and published by World Scientific. This book was released on 2017-03-03 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together seventy seven selected papers presented at the 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016), which was held in Xi’an, China, during August 25–27, 2016. In this rapid growing market in advanced high strength steel and press hardening, in particularly demand from automotive industry and sustainability community to develop light-weight materials for Body in white or BIW, has motivated us to organize ICHSU2016, soon after the successful conclusion of our ICHSU2015 last year to encourage experts all over the world to get together again to exchange note and ideas as how to move the R&D in press hardening technology forward in the new era. The purpose of holding ICHSU2016 is to satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety. This conference arouses great interests and attentions from domestic and foreign researchers in hot stamping field, of the articles accepted, covering almost all the current topics of advanced high strength steel and press hardening technology, which includes materials & testing, modeling & simulation, process design, tribology & tools, equipment and product properties.

Download or read book Advanced High Strength Steel and Press Hardening written by Yisheng Zhang and published by World Scientific. This book was released on 2016-03-11 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together one hundred and ten selected papers presented at the 2nd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2015), which was held in Changsha, China, during October 15–18, 2015. To satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety, ICHSU2015 provided an excellent international platform for researchers to share their knowledge and results in theory, methodology and applications of advanced high strength steel and press hardening technology. This conference aroused great interests and attentions from domestic and foreign researchers in hot stamping field. Experts in this field from Australia, China, Germany and Sweden, contributed to the collection of research results and developments. The papers cover almost all the current topics of advanced high strength steel and press hardening technology. Contents:Materials & Testing I:Recent Developments and Challenges in Hot Stamping of Boron Steel (J P Lin, F F Li and J Y Min)Research on Grain Growth Behavior of Boron Steel (L F Song, M T Ma and G Fang)The Evolution of Oxidation Scales on 22MnB5 Hot Press Forming Steel during Rapid Heating (S J Yao, W J Liu, W B Gao, Z W Zhang and Y L Ding)Resistance Spot Welding Test of 1300HF Hot Forming Steel (Y H Hu, Z J Huang, R Ge and J G Hu)The Development of Data Processing Software for Dynamic Tension of Materials (Y Zhao, M T Ma, X M Wan, Q S Jin, J P Zhang and G Fang)Materials & Testing II:Microstructure and Mechanical Properties of Fe-18Mn-10Al-1.2C Steel (D Han, H Ding, Z H Cai, Z Q Wu and J Zhang)Research on Stamping Performanace of Dual Phase Steel in Tailor Welded Blanks (G C Liu, F Li, H C Zhu, C Wang, F X Xu and G Wang)Effect of Strain Path on the Dynamic Mechanical Properties of DP780 (Q J Zhao, G Fang, J P Zhang and Q S Jin)Mechanical Properties and Microstructure of DP Steel Sheets under Dynamic Loads (J P Zhang, G Fang, Q S Jin and M T Ma)Magnetic Barkhausen Noise Signal Characteristics of TRIP800 under Uniaxial Tension (Y Xu, B Zhu, Y L Wang, Y S Zhang and W Zhang)Modeling & Simulation:Metallo-Thermo-Mechanical Coupled Analysis of the Influence of Key Process Parameters on the Quality of Hot Stamping Component (W Zhang, Y G Liu, H R Gu, J C Jin, Y Zhang, J W Li and H B Wang)Finite Element Simulation for Hot Stamping of Automobile Pillar Inner Panel (F X Jin, Z Shen, Y Bian and Z P Zhong)Numerical Simulation on Cooling System of Hot Stamping Mold In B-Pillar (G J Chen, Y Zhang, W Shen, L J Qin, N Deng and X C Yao)Study on the Deflection Mechanicsm in Radial Ring Rolling (W X Hao, L H Song and C F Wang)Process Design:Tendency of Heat Treatment of Large Workpieces: Novel ATQ Technology (X W Zuo, N L Chen and Y H Rong)Research on High Strength Steel Hot Stamping Technology and Equipment (Y L Wang, B Zhu and Y S Zhang)Experiment and Simulation of Hot Stamping Tailor-Welded High Strength Steels (B T Tang, W Zheng and L L Huang)Development of Side Frame Beam with Hot Stamping Process (Q Yang, B Liu and Z T Zhu)Controlling Spring Back of High-Strength Steel Based on Shape Adjustable Bead (C Y Wang, X Y Zhang, C Dai, S Y Wang and F F Guo)Tribology & Tools:Tribology in Hot Stamping of Boron Steel Sheets (S Bruchi, A Ghiotti and F Medea)Understanding Wear Conditions during Hot Stamping (M P Pereira, A Abdollahpoor, B F Rolfe, P Zhang and C Wang)The Influence of Re Flow Ionitriding on Abrasion Resistance of H13 Mould Material (M T Ma, Z F Sun, X C Yao, W Shen and L F Song)Equipment:Advanced Design of Continuous Furnace for Hot Stamping Line (B Dvorak, J J Tawk and T Vit)New Trends of Laser Applications for Hot Forming Parts Manufacturing (J H Ji and P Wang)Robot-Based Automatic Dimension Inspection for Hot Stamping Parts (L Y Han, Z W Li, K Zhong, G M Zhan, Y J Huang, G Yang and M Zhou)Product Properties:The Application of Press Hardened Steel on Volvo XC90 Gen II (X M Wan, Y Zhao, Y Li and J Zhou)Optimization Design of Side Collision Performance in Whole Car Based on Advanced Hot StampingThe Exploring Research of A-Pillar Strength Tube Based on the Vehicle's Small Overlap Crashworthiness (B H Wang, T Q Fan, F Wang, Q J Zhao and Y Li)Performance Evaluation of Hot Pressed Front Bumper (J P Zhang, L F Song, G Y Wang, M T Ma)The Cold Bending Cracking Analysis of Hot Stamping Door Bumper (M T Ma, Y Zhao, H Z Lu, J Bian, A M Guo and Z F Dun)and other papers Readership: Researchers and Professionals in Advanced High Strength Steel and Press Hardening. Key Features:The proceedings collected together the latest late-breaking contributions funded by Chinese government research agencies in Material Science and Application, Mechanical EngineeringPrinted version of about 30 copies will be POD to meet the order form conference participants and authors alikeAdditional copies will be printed for marketing to include in their library package

Download or read book The 3rd International Conference on Advanced High Strength Steel and Press Hardening ICHSU 2016 written by Yisheng Zhang (Materials scientist) and published by . This book was released on 2017 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This proceedings brings together seventy seven selected papers presented at the 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016), which was held in Xi’an, China, during August 25–27, 2016. In this rapid growing market in advanced high strength steel and press hardening, in particularly demand from automotive industry and sustainability community to develop light-weight materials for Body in white or BIW, has motivated us to organize ICHSU2016, soon after the successful conclusion of our ICHSU2015 last year to encourage experts all over the world to get together again to exchange note and ideas as how to move the R&D in press hardening technology forward in the new era. The purpose of holding ICHSU2016 is to satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety. This conference arouses great interests and attentions from domestic and foreign researchers in hot stamping field, of the articles accepted, covering almost all the current topics of advanced high strength steel and press hardening technology, which includes materials & testing, modeling & simulation, process design, tribology & tools, equipment and product properties."--Publisher's website.

Download or read book Advanced High Strength Steel And Press Hardening Proceedings Of The 4th International Conference On Advanced High Strength Steel And Press Hardening Ichsu2018 written by Ma Mingtu and published by World Scientific. This book was released on 2018-12-14 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry requirements for vehicle weight reduction, weight containment, improved part functionality and passenger safety have resulted in the increased use of steel grades with a fully martensitic microstructure. These steel grades are essential to improve the anti-intrusion resistance of automotive body parts and the related passenger safety during car collisions. Standard advanced high strength steel (AHSS) grades are notoriously difficult to be formed by cold stamping; they are characterized by elastic springback, poor stretch flangeability and low hole expansion ratios. Hot stamping has therefore received much attention recently as an alternative technology to produce AHSS automotive parts.In this book, selected articles from the Fourth International Conference on Advanced High Strength Steel and Press Hardening held on August 20-22th, 2018 in Hefei, China, are compiled. It focuses on AHSS for the development of press hardening of high performance sheet metal for lightweight vehicle, advanced digital manufacturing technology, as well as the physical metallurgy principles of the hot stamping process.Aiming at the process design and industrial application for hot stamping of press hardened steel and high strength aluminium alloy sheet, the effect of temperature and strain rate on the formability and mechanical properties of the products is discussed. In addition, more practical cases are provided concerning accurate modelling and multi-physics coupling simulation of the hot stamping process. Furthermore, the influence of tool design on forming process, more precise process control strategies to increase production efficiency, and the improvement of hot stamping equipment by advanced design methods will also be presented.

Download or read book Advanced High Strength Steel and Press Hardening proceedings of the 2nd International Conference ICHSU2015 written by Yisheng Zhang (Materials scientist) and published by . This book was released on 2016 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced High Strength Steel and Press Hardening written by Yisheng Zhang and published by World Scientific Publishing Company. This book was released on 2018 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry requirements for vehicle weight reduction, weight containment, improved part functionality and passenger safety have resulted in the increased use of steel grades with a fully martensitic microstructure. These steel grades are essential to improve the anti-intrusion resistance of automotive body parts and the related passenger safety during car collisions. Standard advanced high strength steel (AHSS) grades are notoriously difficult to be formed by cold stamping; they are characterized by elastic springback, poor stretch flangeability and low hole expansion ratios. Hot stamping has therefore received much attention recently as an alternative technology to produce AHSS automotive parts. In this book, selected articles from the Fourth International Conference on Advanced High Strength Steel and Press Hardening held on August 20-22th, 2018 in Hefei, China, are compiled. It focuses on AHSS for the development of press hardening of high performance sheet metal for lightweight vehicle, advanced digital manufacturing technology, as well as the physical metallurgy principles of the hot stamping process. Aiming at the process design and industrial application for hot stamping of press hardened steel and high strength aluminium alloy sheet, the effect of temperature and strain rate on the formability and mechanical properties of the products is discussed. In addition, more practical cases are provided concerning accurate modelling and multi-physics coupling simulation of the hot stamping process. Furthermore, the influence of tool design on forming process, more precise process control strategies to increase production efficiency, and the improvement of hot stamping equipment by advanced design methods will also be presented.

Download or read book Advanced High Strength Steel written by Tapas Kumar Roy and published by Springer. This book was released on 2018-02-09 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the AHSS 2017 conference. AHSS is an instrumental event in creating a platform for exchanging recent thoughts and results among a selective group of researchers working in the area of steel science and engineering. Twenty two selected papers have been included in this volume. This book will serve as a reference to many practitioners and researchers working in the areas of steel strength, characterization, and applications.

Download or read book International Conference on Advanced High Strength Sheet Steels for Automotive Applications Proceedings written by Ronald E. Ashburn and published by . This book was released on 2004 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the int'l. conf. on advanced high strength sheet steels for automative applications.

Download or read book 2017 CHS2 Proceedings Hot Sheet Metal Forming of High Performance Steel written by and published by . This book was released on 2017-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Symposium on New Developments in Advanced High Strength Sheet Steels written by and published by . This book was released on 2017-06 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Material Sciences and Technology written by Yue Li and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 1660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). These are peer-reviewed papers selected from the 2012 Spring International Conference on Material Sciences and Technology (MST-S) held on May 27-30th 2012 in Xi’an, China. The 203 papers are grouped into 11 chapters: Analytical Chemistry; Physical Chemistry; Organic Chemistry; Inorganic Chemistry; Catalytical Chemistry; Biochemistry; Applied Chemistry; Nanomaterials; Materials Science; Metals; Application of Modeling.

Download or read book International Virtual Conference on Industry 4 0 written by R. Jagadeesh Kannan and published by Springer Nature. This book was released on 2021-08-03 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Virtual Conference on Industry 4.0 (IVCI4.0 2020). This conference brings together specialists from the academia and industry sectors to promote the exchange of knowledge, ideas, and information on the latest developments and applied technologies in the field of Industry 4.0. The book discusses a wide range of topics such as the design of smart and intelligent products, developments in recent technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable systems, etc. The volume supports the transfer of vital knowledge to the next generation of academics and practitioners.

Download or read book ISET 2019 written by Farid Ahmadi and published by European Alliance for Innovation. This book was released on 2019-06-29 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of International Conference on Science, Education, and Technology 2019 are the compilation of articles in the internationally refereed conference dedicated to promote acceleration of scientific and technological innovation and the utilization of technology in assisting pedagogical process.

Download or read book Proceedings of International Conference on Emerging Technologies and Intelligent Systems written by Mostafa Al-Emran and published by Springer Nature. This book was released on 2021-08-07 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the emerging research trends in intelligent systems and their applications. It mainly focuses on three different themes, including software engineering, ICT in education, and management information systems. Each chapter contributes to the aforementioned themes by discussing the recent design, developments, and modifications of intelligent systems and their applications.

Download or read book ICSSED 2020 written by Muhammad Nur Sa’ban and published by European Alliance for Innovation. This book was released on 2020-11-04 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of the conference is "Reconstructing Morals, Education, and Social Sciences for Achieving Sustainable Development Goals". This theme was formulated due to several considerations. First, the symptoms of moral decline that have the potential to destroy the nation. Morals guide humanity towards truth and civilization. The phenomenon of the dehumanization process in the industrial era that pushed people to be part of abstract societies tends to ignore humanity. The education process as a humanitarian system is increasingly marginalized, especially during discussions about the industrial revolution 4.0 and Society 5.0. The conference placed six sub-themes for speakers and participants to share ideas, namely: Social Sciences and Laws, History and Cultural Studies, Interdisciplinary Studies, Morals and Humanities, Policy, Politics, and Communication, Education. The committee has received 195 abstracts from prospective speakers. However, there are only 80 abstracts that are eligible to be presented at this conference.

Download or read book Material Engineering and Application written by Mosbeh Kaloop and published by Trans Tech Publications Ltd. This book was released on 2023-04-28 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed extended articles based on abstracts presented at the 7th International Conference on Material Engineering and Application (ICMEA-2022) Aggregated Book