Download or read book Proceedings of the 33rd International MATADOR Conference written by David R. Hayhurst and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Conference Chairman n1 It is my pleasure to introduce this volume of Proceedings for the 33 MATADOR Conference. The Proceedings include 83 refereed papers submitted from 19 countries on 4 continents. 00 The spread of papers in this volume reflects four developments since the 32 MATADOR Conference in 1997: (i) the power of information technology to integrate the management and control of manufacturing systems; (ii) international manufacturing enterprises; (iii) the use of computers to integrate different aspects of manufacturing technology; and, (iv) new manufacturing technologies. New developments in the manufacturing systems area are globalisation and the use of the Web to achieve virtual enterprises. In manufacturing technology the potential of the following processes is being realised: rapid proto typing, laser processing, high-speed machining, and high-speed machine tool design. And, at the same time in the area of controls and automation, the flexibility and integration ability of open architecture computer controllers are creating a wide range of opportunities for novel solutions. Up-to-date research results in these and other areas are presented in this volume. The Proceedings reflect the truly international nature of this Conference and the way in which original research results are both collected and disseminated. The volume does not, however, record the rich debate and extensive scientific discussion which took place during the Conference. I trust that you will find this volume to be a permanent record of some of the research carried out in the last two years; and.
Download or read book Proceedings of the 34th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 73 refereed papers given at the 34th MATADOR Conference held at UMIST in July 2004. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The 34th proceedings contains original papers contributed by researchers from many countries on different continents. The papers cover both the technological aspect of manufacturing processes; and the systems, business and management features of manufacturing enterprise. The papers in this volume reflect: - the importance of manufacturing to international wealth creation; - the necessity of responsiveness and agility of manufacturing companies to meet market-led requirements and international change; - the role of information technology and electronic communications in the growth of global manufacturing enterprises; - the impact of new technologies, new materials and processes, on the ability to produce goods of higher quality, more quickly, to meet markets needs at a lower cost. Some of the major generic developments which have taken place in these areas since the 33rd MATADOR conference was held in 2000 are reported in this volume.
Download or read book International Joint Conference SOCO 17 CISIS 17 ICEUTE 17 Le n Spain September 6 8 2017 Proceeding written by Hilde Pérez García and published by Springer. This book was released on 2017-08-21 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers presented at SOCO 2017, CISIS 2017, and ICEUTE 2017, all conferences held in the beautiful and historic city of León (Spain) in September 2017. Soft computing represents a collection of computational techniques in machine learning, computer science, and some engineering disciplines, which investigate, simulate, and analyze highly complex issues and phenomena. These proceeding s feature 48 papers from the 12th SOCO 2017, covering topics such as artificial intelligence and machine learning applied to health sciences; and soft computing methods in manufacturing and management systems. The book also presents 18 papers from the 10th CISIS 2017, which provided a platform for researchers from the fields of computational intelligence, information security, and data mining to meet and discuss the need for intelligent, flexible behavior by large, complex systems, especially in mission-critical domains. It addresses various topics, like identification, simulation and prevention of security and privacy threats in modern communication networks Furthermore, the book includes 8 papers from the 8th ICEUTE 2017. The selection of papers for all three conferences was extremely rigorous in order to maintain the high quality and we would like to thank the members of the Program Committees for their hard work in the reviewing process.
Download or read book Applications and Innovations in Intelligent Systems IX written by Ann Macintosh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ann Macintosh Napier University, UK The papers in this volume are the refereed application papers presented at ES2001, the Twenty-fIrst SGES International Conference on Knowledge Based Systems and Applied ArtifIcial Intelligence, held in Cambridge in December 200 I. The scope of the application papers has expanded over recent years to cover not just innovative applications using traditional knowledge based systems, but also to include applications demonstrating the whole range of AI technologies. These papers continue to illustrate the maturity of AI as a commercially viable technology to solve real world problems. The papers were subject to refereeing by at least two expert referees. All papers that were in any way controversial were discussed in depth by the Application Programme Committee. For the ES2001 Application Stream, a paper is acceptable even if it describes a system that has not yet been installed, provided the application is original and the paper discusses the kind of things that would help others needing to solve a similar problem. Papers have been selected to highlight critical areas of success - and failure - and to present the benefIts and lessons learnt to other developers. This volume contains sixteen papers describing deployed or emerging applications in a range of diverse areas: business and commerce, engineering, manufacturing, knowledge and information management, and music.
Download or read book Surface Grinding of Intermetallic Titanium Aluminides written by Holger Andreas Gröning and published by Apprimus Wissenschaftsverlag. This book was released on 2014-12-22 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: A deductive kinematic model of creep-feed and speed-stroke grinding processes is developed to identify possibilities to reduce the energy introduced into the workpiece. By computer tomography analysis and tactile measurements of the grinding wheel the pore volume and the static cutting edge number are determined and included in the model. Based on the kinematic model and the grinding wheel characteristics an analytical evaluation of the specific grinding energy for speed-stroke and creep-feed grinding is carried out. The deducted process design is evaluated in experimental investigations. The generated model is evaluated by determining specific process values for the grinding forces and the grinding energy.
Download or read book Advances in Manufacturing Technology XVI NCMR 2002 written by Kai Cheng and published by John Wiley & Sons. This book was released on 2002-11-22 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing Technology XVI provides a comprehensive collection of papers exploring the very latest developments in the field of manufacturing engineering and managment and incorporates the most up-to-date techniques. TOPICS COVERED INCLUDE: Business strategies process reengineering CAD/CAM and concurrent engineering E-manufacturing and virtual reality Engineering modelling and simulations Total quality management and metrology Intelligent systems. robotics and automation Lean and agiel manufacturing Machining process and tooling Operations management Process control and condition monitoring Covering all aspects of manufacturing engineering, systems, and management this volume will be of great interest to those wanting to keep abreast pf current research and those involved in the planning stages in this area of engineering.
Download or read book Tungsten Carbide written by Kui Liu and published by BoD – Books on Demand. This book was released on 2012-12-19 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tungsten Carbide - Processing and Applications, provides fundamental and practical information of tungsten carbide from powder processing to machining technologies for industry to explore more potential applications. Tungsten carbide has attracted great interest to both engineers and academics for the sake of its excellent properties such as hard and wear-resistance, high melting point and chemically inert. It has been applied in numerous important industries including aerospace, oil and gas, automotive, semiconductor and marine as mining and cutting tools, mould and die, wear parts, etc., which also has a promising future particularly due to enabling to resist high temperature and are extremely hard.
Download or read book Lasers Based Manufacturing written by Shrikrishna N. Joshi and published by Springer. This book was released on 2015-04-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.
Download or read book Proceedings of the 37th International MATADOR Conference written by Srichand Hinduja and published by Springer Science & Business Media. This book was released on 2012-10-09 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here are 97 refereed papers given at the 37th MATADOR Conference held at The University of Manchester in July 2012. The MATADOR series of conferences covers the topics of Manufacturing Automation and Systems Technology, Applications, Design, Organisation and Management, and Research. The Proceedings of this Conference contain original papers contributed by researchers from many countries on different continents. The papers cover the principles, techniques and applications in aerospace, automotive, biomedical, energy, consumable goods and process industries. The papers in this volume reflect: the importance of manufacturing to international wealth creation; the emerging fields of micro- and nano-manufacture; the increasing trend towards the fabrication of parts using lasers; the growing demand for precision engineering and part inspection techniques, and the changing trends in manufacturing within a global environment.
Download or read book Occupational and Environmental Safety and Health written by Pedro M. Arezes and published by Springer. This book was released on 2019-02-27 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores a number of important issues in the area of occupational safety and hygiene. Presenting both research and best practices for the evaluation of occupational risk, safety and health in various types of industry, it particularly focuses on occupational safety in automated environments, innovative management systems and occupational safety in a global context. The different chapters examine the perspectives of all those involved, such as managers, workers and OSH professionals. Based on selected contributions presented at the 15th International Symposium on Occupational Safety and Hygiene (SHO 2019), held on 15–16 April, 2019, in Guimarães, Portugal, the book serves as a timely reference guide and source of inspiration to OSH researchers, practitioners and organizations operating in a global context.
Download or read book Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Grigore Gogu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in the integration and the optimization of product design and manufacturing systems. The book is divided into 3 chapters corresponding to the following three main topics : - optimization of product design process (mechanical design process, mass customization, modeling the product representation, computer support for engineering design, support systems for tolerancing, simulation and optimization tools for structures and for mechanisms and robots), -optimization of manufacturing systems (multi-criteria optimization and fuzzy volumes, tooth path generation, machine-tools behavior, surface integrity and precision, process simulation), - methodological aspects of integrated design and manufacturing (solid modeling, collaborative tools and knowledge formalization, integrating product and process design and innovation, robust and reliable design, multi-agent approach in VR environment). The present book is of interest to engineers, researchers, academic staff, and postgraduate students interested in integrated design and manufacturing in mechanical engineering.
Download or read book Advances in Integrated Design and Manufacturing in Mechanical Engineering written by Alan Bramley and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a selection of papers related to the fifth edition of book further to the International Conference on Integrated Design and Manufacturing in Mechanical Engineering. This Conference has been organized within the framework of the activities of the AIP-PRIMECA network whose main scientific field is Integrated Design applied to both Mechanical Engineering and Productics. This network isorganized along the lines of a joint project: the evolution, in the field of training of Integrated Design in Mechanics and Productics, in quite close connection with the ever changing industrial needs over the past 20 years. It is in charge of promoting both exchanges of experience and know-how capitalisation. It has a paramount mission to fulfil, be it in the field of initial and continuous education, technological transfer and knowledge dissemination through strong links with research labs. For the second time, in fact, the IDMME Conference has been held abroad and, after Canada in 2000, the United Kingdom, more particularly Bath University, has been retained under the responsibility of Professor Alan Bramley, the Chairman of the Scientific Committee of the conference. The Scientific Committee members have selected all the lectures from com mplete papers, which is the guarantee for the Conference of quite an outstanding scientific level. After that, a new selection hasbeen carried out to retain the best publications, which establish in a book, a state-of-the-art analysis as regards Integrated Design and Manufacturing in the discipline of Mechanical Engineering.
Download or read book Proceedings of 3rd International Conference on the Industry 4 0 Model for Advanced Manufacturing written by Jun Ni and published by Springer. This book was released on 2018-05-08 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing (AMP 2018), held in Belgrade, Serbia, on 5–7 June 2018, the latest in a series of high-level conferences that brings together experts from academia and industry to exchange knowledge, ideas, experiences, research findings, and information in the field of manufacturing. The book addresses a wide range of topics, including, for example, design of smart and intelligent products, developments in CAD/CAM technologies, rapid prototyping and reverse engineering, multistage manufacturing processes, manufacturing automation in the Industry 4.0 model, cloud-based products, and cyber-physical and reconfigurable manufacturing systems. By providing updates on key issues and recent advances in manufacturing engineering and technologies, it aids the transfer of vital knowledge to the next generation of academics and practitioners. It appeals to anyone working or conducting research in this rapidly evolving field.
Download or read book Expert Systems written by Cornelius T. Leondes and published by Elsevier. This book was released on 2001-09-26 with total page 2125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This six-volume set presents cutting-edge advances and applications of expert systems. Because expert systems combine the expertise of engineers, computer scientists, and computer programmers, each group will benefit from buying this important reference work. An "expert system" is a knowledge-based computer system that emulates the decision-making ability of a human expert. The primary role of the expert system is to perform appropriate functions under the close supervision of the human, whose work is supported by that expert system. In the reverse, this same expert system can monitor and double check the human in the performance of a task. Human-computer interaction in our highly complex world requires the development of a wide array of expert systems. Expert systems techniques and applications are presented for a diverse array of topics including Experimental design and decision support The integration of machine learning with knowledge acquisition for the design of expert systems Process planning in design and manufacturing systems and process control applications Knowledge discovery in large-scale knowledge bases Robotic systems Geograhphic information systems Image analysis, recognition and interpretation Cellular automata methods for pattern recognition Real-time fault tolerant control systems CAD-based vision systems in pattern matching processes Financial systems Agricultural applications Medical diagnosis
Download or read book Intelligent Manufacturing written by Society of Photo-optical Instrumentation Engineers and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book Advances in Feature Based Manufacturing written by J.J. Shah and published by Elsevier. This book was released on 2013-10-22 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well known researchers in all areas related to featured based manufacturing have contributed chapters to this book. Some of the chapters are surveys, while others review a specific technique. All contributions, including those from the editors, were thoroughly refereed. The goal of the book is to provide a comprehensive picture of the present stage of development of Features Technology from the point of view of applications in manufacturing. The book is aimed at several audiences. Firstly, it provides the research community with an overview of the present state-of-the-art features in manufacturing, along with references in the literature. Secondly, the book will be useful as supporting material for a graduate-level course on product modeling and realization. Finally, the book will also be valuable to industrial companies who are assessing the significance of features for their business.
Download or read book Laser Forming and Welding Processes written by Bekir Sami Yilbas and published by Springer Science & Business Media. This book was released on 2013-07-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces model studies and experimental results associated with laser forming and welding such as laser induced bending, welding of sheet metals, and related practical applications. The book provides insight into the physical processes involved with laser forming and welding. The analytical study covers the formulation of laser induced bending while the model study demonstrates the simulation of bending and welding processes using the finite element method. Analytical and numerical solutions for laser forming and welding problems are provided.
