Download or read book Proceedings of the 20th International Meshing Roundtable written by William Roshan Quadros and published by Springer Science & Business Media. This book was released on 2011-12-06 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the articles presented at the 20th International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and was held in Paris, France on Oct 23-26, 2011. This is the first year the IMR was held outside the United States territory. Other sponsors of the 20th IMR are Systematic Paris Region Systems & ICT Cluster, AIAA, NAFEMS, CEA, and NSF. The Sandia National Laboratories started the first IMR in 1992, and the conference has been held annually since. Each year the IMR brings together researchers, developers, and application experts, from a variety of disciplines, to present and discuss ideas on mesh generation and related topics. The topics covered by the IMR have applications in numerical analysis, computational geometry, computer graphics, as well as other areas, and the presentations describe novel work ranging from theory to application.
Download or read book Proceedings of the 15th International Meshing Roundtable written by Philippe P. Pebay and published by Springer Science & Business Media. This book was released on 2007-07-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume were selected for presentation at the 15th International Meshing Roundtable, held September 17–20, 2006 in Birmingham, Alabama, U.S.A.. The conference was started by Sandia National Laboratories in 1992 as a small meeting of organizations striving to establish a common focus for research and development in the field of mesh generation. Now after 15 consecutive years, the International Meshing Roundtable has become recognized as an international focal point annually attended by researchers and developers from dozens of countries around the world. The 15th International Meshing Roundtable consists of technical presentations from contributed papers, keynote and invited talks, short course presentations, and a poster session and competition. The Program Committee would like to express its appreciation to all who participate to make the IMR a successful and enriching experience. The papers in these proceedings were selected from among 42 submissions by the Program Committee. Based on input from peer reviews, the committee selected these papers for their perceived quality, originality, and appropriateness to the theme of the International Meshing Roundtable. The Program Committee would like to thank all who submitted papers. We would also like to thank the colleagues who provided reviews of the submitted papers. The names of the reviewers are acknowledged in the following pages. As Program Chair, I would like to extend special thanks to the Program Committee and to the Conference Coordinators for their time and effort to make the 15th IMR another outstanding conference.
Download or read book Proceedings of the 21st International Meshing Roundtable written by Xiangmin Jiao and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the articles presented at the 21st International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and was held on October 7–10, 2012 in San Jose, CA, USA. The first IMR was held in 1992, and the conference series has been held annually since. Each year the IMR brings together researchers, developers, and application experts in a variety of disciplines, from all over the world, to present and discuss ideas on mesh generation and related topics. The technical papers in this volume present theoretical and novel ideas and algorithms with practical potential, as well as technical applications in science and engineering, geometric modeling, computer graphics, and visualization.
Download or read book Proceedings of the 22nd International Meshing Roundtable written by Josep Sarrate and published by Springer Science & Business Media. This book was released on 2013-09-03 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the articles presented at the 22nd International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and was held on Oct 13-16, 2013 in Orlando, Florida, USA. The first IMR was held in 1992, and the conference series has been held annually since. Each year the IMR brings together researchers, developers, and application experts in a variety of disciplines, from all over the world, to present and discuss ideas on mesh generation and related topics. The technical papers in this volume present theoretical and novel ideas and algorithms with practical potential, as well as technical applications in science and engineering, geometric modeling, computer graphics and visualization.
Download or read book Proceedings of the 17th International Meshing Roundtable written by Rao V. Garimella and published by Springer Science & Business Media. This book was released on 2008-10-23 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the articles presented at the 17th International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and held October 12-15, 2008. The volume presents recent results of mesh generation and adaptation which has applications to finite element simulation. It introduces theoretical and novel ideas with practical potential.
Download or read book SIAM International Meshing Roundtable 2023 written by Eloi Ruiz-Gironés and published by Springer Nature. This book was released on with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 16th International Meshing Roundtable written by Michael L. Brewer and published by Springer Science & Business Media. This book was released on 2007-09-26 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the articles presented at the 16th International Meshing Roundtable (IMR) organized, in part, by Sandia National Laboratories and held in Seattle, Washington, U.S.A. in October, 2007. The volume presents recent results of mesh generation and adaptation which has applications to finite element simulation. It introduces theoretical and novel ideas with practical potential.
Download or read book 27th International Meshing Roundtable written by Xevi Roca and published by Springer. This book was released on 2019-07-01 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Meshing Roundtable (IMR) brings together researchers, developers, and application experts in a variety of disciplines, from all over the world, to present and discuss ideas on mesh generation and related topics. The technical papers in this volume present theoretical and novel ideas and algorithms with practical potential, as well as technical applications in science and engineering, geometric modelling, computer graphics, and visualization.
Download or read book Spectral and High Order Methods for Partial Differential Equations ICOSAHOM 2018 written by Spencer J. Sherwin and published by Springer Nature. This book was released on 2020-08-11 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book features a selection of high-quality papers from the presentations at the International Conference on Spectral and High-Order Methods 2018, offering an overview of the depth and breadth of the activities within this important research area. The carefully reviewed papers provide a snapshot of the state of the art, while the extensive bibliography helps initiate new research directions.
Download or read book Image Based Geometric Modeling and Mesh Generation written by Yongjie (Jessica) Zhang and published by Springer Science & Business Media. This book was released on 2012-07-03 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a new interdisciplinary research area, “image-based geometric modeling and mesh generation” integrates image processing, geometric modeling and mesh generation with finite element method (FEM) to solve problems in computational biomedicine, materials sciences and engineering. It is well known that FEM is currently well-developed and efficient, but mesh generation for complex geometries (e.g., the human body) still takes about 80% of the total analysis time and is the major obstacle to reduce the total computation time. It is mainly because none of the traditional approaches is sufficient to effectively construct finite element meshes for arbitrarily complicated domains, and generally a great deal of manual interaction is involved in mesh generation. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications. This contributed volume, the first for such an interdisciplinary topic, collects the latest research by experts in this area. These papers cover a broad range of topics, including medical imaging, image alignment and segmentation, image-to-mesh conversion, quality improvement, mesh warping, heterogeneous materials, biomodelcular modeling and simulation, as well as medical and engineering applications.
Download or read book Parallel Computing Accelerating Computational Science and Engineering CSE written by M. Bader and published by IOS Press. This book was released on 2014-03-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computing has been the enabling technology of high-end machines for many years. Now, it has finally become the ubiquitous key to the efficient use of any kind of multi-processor computer architecture, from smart phones, tablets, embedded systems and cloud computing up to exascale computers. _x000D_ This book presents the proceedings of ParCo2013 – the latest edition of the biennial International Conference on Parallel Computing – held from 10 to 13 September 2013, in Garching, Germany. The conference focused on several key parallel computing areas. Themes included parallel programming models for multi- and manycore CPUs, GPUs, FPGAs and heterogeneous platforms, the performance engineering processes that must be adapted to efficiently use these new and innovative platforms, novel numerical algorithms and approaches to large-scale simulations of problems in science and engineering._x000D_ The conference programme also included twelve mini-symposia (including an industry session and a special PhD Symposium), which comprehensively represented and intensified the discussion of current hot topics in high performance and parallel computing. These special sessions covered large-scale supercomputing, novel challenges arising from parallel architectures (multi-/manycore, heterogeneous platforms, FPGAs), multi-level algorithms as well as multi-scale, multi-physics and multi-dimensional problems._x000D_ It is clear that parallel computing – including the processing of large data sets (“Big Data”) – will remain a persistent driver of research in all fields of innovative computing, which makes this book relevant to all those with an interest in this field.
Download or read book IDIHOM Industrialization of High Order Methods A Top Down Approach written by Norbert Kroll and published by Springer. This book was released on 2015-01-02 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the main findings of the EU-funded project IDIHOM (Industrialization of High-Order Methods – A Top-Down Approach). The goal of this project was the improvement, utilization and demonstration of innovative higher-order simulation capabilities for large-scale aerodynamic application challenges in the aircraft industry. The IDIHOM consortium consisted of 21 organizations, including aircraft manufacturers, software vendors, as well as the major European research establishments and several universities, all of them with proven expertise in the field of computational fluid dynamics. After a general introduction to the project, the book reports on new approaches for curved boundary-grid generation, high-order solution methods and visualization techniques. It summarizes the achievements, weaknesses and perspectives of the new simulation capabilities developed by the project partners for various industrial applications, and includes internal- and external-aerodynamic as well as multidisciplinary test cases.
Download or read book Advances on Mechanics Design Engineering and Manufacturing II written by Francisco Cavas-Martínez and published by Springer. This book was released on 2019-04-27 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2018), held on 20-22 June 2018 in Cartagena, Spain. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into six main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.
Download or read book Computer Aided Architectural Design INTERCONNECTIONS Co computing Beyond Boundaries written by Michela Turrin and published by Springer Nature. This book was released on 2023-07-04 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the refereed Selected Papers of the 20th International Conference on Computer-Aided Architectural Design. INTERCONNECTIONS: Co-computing Beyond Boundaries, CAAD Futures 2023, held in Delft, The Netherlands, in July 5–7, 2023. The 43 full papers included in this book were carefully reviewed and selected from 144 submissions. They were organized in topical sections as follows: algorithmic architectural design; AI-powered architectural ideation; performance-based design, urban models and analysis; urban design; digital design, materials and fabrication; spatial information, data and semantics; building data analysis, visualisation, interaction; and building massing and layouts.
Download or read book Computational Modeling of Objects Presented in Images Fundamentals Methods and Applications written by Yongjie Jessica Zhang and published by Springer. This book was released on 2014-07-23 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Computational Modeling of Objects Presented in Images, CompIMAGE 2014, held in Pittsburgh, PA, USA, in September 2014. The 29 revised full papers presented together with 10 short papers and 6 keynote talks were carefully reviewed and selected from 54 submissions. The papers cover the following topics: medical treatment, imaging and analysis; image registration, denoising and feature identification; image segmentation; shape analysis, meshing and graphs; medical image processing and simulations; image recognition, reconstruction and predictive modeling; image-based modeling and simulations; and computer vision and data-driven investigations.
Download or read book TILDA Towards Industrial LES DNS in Aeronautics written by Charles Hirsch and published by Springer Nature. This book was released on 2021-06-28 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers detailed insights into new methods for high-fidelity CFD, and their industrially relevant applications in aeronautics. It reports on the H2020 TILDA project, funded by the European Union in 2015-2018. The respective chapters demonstrate the potential of high-order methods for enabling more accurate predictions of non-linear, unsteady flows, ensuring enhanced reliability in CFD predictions. The book highlights industrially relevant findings and representative test cases on the development of high-order methods for unsteady turbulence simulations on unstructured grids; on the development of the LES/DNS methodology by means of multilevel, adaptive, fractal and similar approaches for applications on unstructured grids; and on leveraging existent large-scale HPC networks to facilitate the industrial applications of LES/DNS in daily practice. Furthermore, the book discusses multidisciplinary applications of high-order methods in the area of aero-acoustics. All in all, it offers timely insights into the application and performance of high-order methods for CFD, and an extensive reference guide for researchers, graduate students, and industrial engineers whose work involves CFD and turbulence modeling.
Download or read book Computational Science and Its Applications ICCSA 2015 written by Osvaldo Gervasi and published by Springer. This book was released on 2015-06-18 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 9155-9159 constitutes the refereed proceedings of the 15th International Conference on Computational Science and Its Applications, ICCSA 2015, held in Banff, AB, Canada, in June 2015. The 232 revised full papers presented in 22 workshops and a general track were carefully reviewed and selected from 780 initial submissions for inclusion in this volume. They cover various areas in computational science ranging from computational science technologies to specific areas of computational science such as computational geometry and security.
