Download or read book ICoRD 15 Research into Design Across Boundaries Volume 2 written by Amaresh Chakrabarti and published by Springer. This book was released on 2014-12-23 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases over 60 cutting-edge research papers from the 5th International Conference on Research into Design – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design across boundaries. The special features of the book are the variety of insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation.
Download or read book Design in the Era of Industry 4 0 Volume 3 written by Amaresh Chakrabarti and published by Springer Nature. This book was released on 2023-07-24 with total page 1194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases cutting-edge research papers from the 9th International Conference on Research into Design (ICoRD 2023) – the largest in India in this area – written by eminent researchers from across the world on design processes, technologies, methods and tools, and their impact on innovation, for supporting design for a connected world. The theme of ICoRD’23 has been ‘Design in the Era of Industry 4.0’. Industry 4.0 signifies the fourth industrial revolution. The first industrial revolution was driven by the introduction of mechanical power such as steam and water engines to replace human and animal labour. The second industrial revolution involved introduction of electrical power and organised labour. The third industrial revolution was powered by introduction of industrial automation. The fourth industrial revolution involves introduction of a combination of technologies to enable connected intelligence and industrial autonomy. The introduction of Industry 4.0 dramatically changes the landscape of innovation, and the way design, the engine of innovation, is carried out. The theme of ICoRD’23 - ‘Design in the Era of Industry 4.0’ –explores how Industry 4.0 concepts and technologies influence the way design is conducted, and how methods, tools, and approaches for supporting design can take advantage of this transformational change that is sweeping across the world. The book is of interest to researchers, professionals, and entrepreneurs working in the areas on industrial design, manufacturing, consumer goods, and industrial management who are interested in the new and emerging methods and tools for design of new products, systems, and services.
Download or read book The Design and Development Process written by David C. Wynn and published by Springer Nature. This book was released on 2023-11-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores a process perspective on design and development, grounded in research in design studies, engineering design and systems design. The design and development process is important---it creates all artificial products and systems and determines how well they address human needs. The process perspective set out in this book has value for design and development practice and education, and is in its own right a fascinating topic of investigation. This book expands on the foundations of a process perspective and discusses its realisation in many process models, theories and approaches that have been developed over the years. The chapters provide connected overviews of key concepts and introduce new conceptual frameworks to clarify relationships between the contributions discussed. Practical considerations and competencies required to realise the tangible benefits of a process perspective are also discussed. A unique aspect of this book is that it brings together many perspectives on the design and development process: those that focus on individual design activity through to those that focus on large-scale development projects; those of research interest and those of practical interest; and those of relevance to design contexts ranging from human-centered design to engineering design and systems design. The chapter bibliographies collect carefully-selected recommendations for further reading on each topic discussed. The book additionally contains many figures presented in colour, visually reflecting each topic's relationship to the new organising frameworks that are introduced.
Download or read book Proceedings of the 20th Congress of the International Ergonomics Association IEA 2018 written by Sebastiano Bagnara and published by Springer. This book was released on 2018-08-10 with total page 2141 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), held on August 26-30, 2018, in Florence, Italy. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Ergonomics in Design, Activity Theories for Work Analysis and Design, and Affective Design.
Download or read book Proceedings of the 15th International Conference on Ubiquitous Computing Ambient Intelligence UCAmI 2023 written by José Bravo and published by Springer Nature. This book was released on with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Computing and Cognition 16 written by John. S Gero and published by Springer. This book was released on 2016-12-31 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed and revised versions of papers from the Seventh International Conference on Design Computing and Cognition (DCC'16), held at Northwestern University, Evanston (Chicago), USA, from 27–29 June 2016. The material presented here reflects cutting-edge design research with a focus on artificial intelligence, cognitive science and computational theories. The papers are grouped under the following nine headings, describing advances in theory and applications alike and demonstrating the depth and breadth of design computing and design cognition: Design Creativity; Design Cognition - Design Approaches; Design Support; Design Grammars; Design Cognition - Design Behaviors; Design Processes; Design Synthesis; Design Activity and Design Knowledge. The book will be of particular interest to researchers, developers and users of advanced computation in design across all disciplines, and to all readers who need to gain a better understanding of designing.
Download or read book Design Tools and Methods in Industrial Engineering written by Caterina Rizzi and published by Springer Nature. This book was released on 2019-09-19 with total page 989 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge design methods and tools in industrial engineering, advanced findings in mechanics and material science, and relevant technological applications. Topics span from geometric modelling tools to applications of virtual/augmented reality, from interactive design to ergonomics, human factors research and reverse engineering. Further topics include integrated design and optimization methods, as well as experimental validation techniques for product, processes and systems development, such as additive manufacturing technologies. This book is based on the International Conference on Design Tools and Methods in Industrial Engineering, ADM 2019, held on September 9–10, 2019, in Modena, Italy, and organized by the Italian Association of Design Methods and Tools for Industrial Engineering, and the Department of Engineering “Enzo Ferrari” of the University of Modena and Reggio Emilia, Italy. It provides academics and professionals with a timely overview and extensive information on trends and technologies in industrial design and manufacturing.
Download or read book Research into Design for Communities Volume 2 written by Amaresh Chakrabarti and published by Springer. This book was released on 2017-04-13 with total page 1038 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases cutting-edge research papers from the 6th International Conference on Research into Design (ICoRD 2017) – the largest in India in this area – written by eminent researchers from across the world on design process, technologies, methods and tools, and their impact on innovation, for supporting design for communities. While design traditionally focused on the development of products for the individual, the emerging consensus on working towards a more sustainable world demands greater attention to designing for and with communities, so as to promote their sustenance and harmony - within each community and across communities. The special features of the book are the insights into the product and system innovation process, and the host of methods and tools from all major areas of design research for the enhancement of the innovation process. The main benefit of the book for researchers in various areas of design and innovation are access to the latest quality research in this area, with the largest collection of research from India. For practitioners and educators, it is exposure to an empirically validated suite of theories, models, methods and tools that can be taught and practiced for design-led innovation. The contents of this volume will be of use to researchers and professionals working in the areas on industrial design, manufacturing, consumer goods, and industrial management.
Download or read book Fault Tolerant Design and Control of Automated Vehicles and Processes written by Ralf Stetter and published by Springer. This book was released on 2019-02-14 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes strategies, methods, algorithms, frameworks and systems for the fault-tolerant design and control of automated vehicles and processes. Intelligent systems may be able to accommodate inevitable faults, but this ability requires targeted design processes and advanced control systems. This book explains the respective elements involved in automated vehicles and processes. It provides detailed descriptions of fault-tolerant design, not offered in the existent scientific literature. With regard to fault-tolerant control, the focus is on innovative methods, which can accommodate not only uncertainties, but also shared and flexible redundant elements. The book is intended to present a concise guide for researchers in the field of fault-tolerant design and control, and to provide concrete insights for design and control engineers working in the field of automated vehicles and processes.
Download or read book Cross Cultural Design written by Pei-Luen Patrick Rau and published by Springer Nature. This book was released on 2023-07-08 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of CCD 2023, constitutes the refereed proceedings of the 25th International Conference on Cross-Cultural Design, CCD 2023, held as Part of the 24th International Conference, HCI International 2023, which took place in July 2023 in Copenhagen, Denmark. The total of 1578 papers and 396 posters included in the HCII 2023 proceedings volumes was carefully reviewed and selected from 7472 submissions. The papers of CCD 2023, Part I address topics related to service and product design for cultural innovation, design for social change and development, sustainable design methods and practices, and cross-cultural perspectives on design and consumer behavior.
Download or read book Research into Design for a Connected World written by Amaresh Chakrabarti and published by Springer. This book was released on 2019-01-08 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases cutting-edge research papers from the 7th International Conference on Research into Design (ICoRD 2019) – the largest in India in this area – written by eminent researchers from across the world on design processes, technologies, methods and tools, and their impact on innovation, for supporting design for a connected world. The theme of ICoRD‘19 has been “Design for a Connected World”. While Design traditionally focused on developing products that worked on their own, an emerging trend is to have products with a smart layer that makes them context aware and responsive, individually and collectively, through collaboration with other physical and digital objects with which these are connected. The papers in this volume explore these themes, and their key focus is connectivity: how do products and their development change in a connected world? The volume will be of interest to researchers, professionals and entrepreneurs working in the areas on industrial design, manufacturing, consumer goods, and industrial management who are interested in the use of emerging technologies such as IOT, IIOT, Digital Twins, I4.0 etc. as well as new and emerging methods and tools to design new products, systems and services.
Download or read book Design Methodology for Future Products written by Dieter Krause and published by Springer Nature. This book was released on 2021-12-13 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Methodology for Future Products – Data Driven, Agile and Flexible provides an overview of the recent research in the field of design methodology from the point of view of the members of the scientific society for product development (WiGeP - Wissenschaftliche Gesellschaft für Produktenwicklung e.V.). This book aims to contribute to design methods and their implementation for innovative future products. The main focus is the crucial data-driven, agile, and flexible way of working. Four topics are covered in corresponding chapters, Methods for Product Development and Management, Methods for Specific Products and Systems, Facing the Challenges in Product Development and Model-Based Engineering in Product Development. This publication starts with the agile strategic foresight of sustainable mechatronic and cyber-physical systems, moves on to the topics of system generation engineering in development processes, followed by the technical inheritance in data-driven product development. Product improvements are shown via agile experiential learning based on reverse engineering and via combination of usability and emotions. Furthermore, the development of future-oriented products in the field of biomechatronic systems, sustainable mobility systems and in situ sensor integration is shown. The overcoming of challenges in product development is demonstrated through context-adapted methods by focusing on efficiency and effectiveness, as well as designer-centered methods to tackle cognitive bias. Flow design for target-oriented availability of data and information in product development is addressed. Topics of model-based systems engineering are applied to the function-driven product development by linking model elements at all stages and phases of the product. The potential of model-based systems engineering for modular product families and engineering of multidisciplinary complex systems is shown.
Download or read book Proceedings of the 21st Congress of the International Ergonomics Association IEA 2021 written by Nancy L. Black and published by Springer Nature. This book was released on 2021-05-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021), held online on June 13-18, 2021. By highlighting the latest theories and models, as well as cutting-edge technologies and applications, and by combining findings from a range of disciplines including engineering, design, robotics, healthcare, management, computer science, human biology and behavioral science, it provides researchers and practitioners alike with a comprehensive, timely guide on human factors and ergonomics. It also offers an excellent source of innovative ideas to stimulate future discussions and developments aimed at applying knowledge and techniques to optimize system performance, while at the same time promoting the health, safety and wellbeing of individuals. The proceedings include papers from researchers and practitioners, scientists and physicians, institutional leaders, managers and policy makers that contribute to constructing the Human Factors and Ergonomics approach across a variety of methodologies, domains and productive sectors. This volume includes papers addressing the following topics: Transport Ergonomics and Human Factors, Practitioner Case Studies, Human Factors in Robotics, Manufacturing, Agriculture, HF/E in Supply Chain Design and Management, Aerospace, Building and Construction.
Download or read book Virtual and Mixed Reality Systems and Applications written by Randall Shumaker and published by Springer Science & Business Media. This book was released on 2011-06-24 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 6773-6774 constitutes the refereed proceedings of the International Conference on Virtual and Mixed Reality 2011, held as Part of HCI International 2011, in Orlando, FL, USA, in July 2011, jointly with 10 other conferences addressing the latest research and development efforts and highlighting the human aspects of design and use of computing systems. The 47 revised papers included in the first volume were carefully reviewed and selected from numerous submissions. The papers are organized in the following topical sections: VR in education, training and health; VR for culture and entertainment; virtual humans and avatars; developing virtual and mixed environments.
Download or read book Global Product Development written by Alain Bernard and published by Springer Science & Business Media. This book was released on 2011-05-05 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of proceedings is the synthesis of all the papers, including keynotes presented during the 20th CIRP Design conference. The book is structured with respect to several topics, in fact the main topics that serve at structuring the program. For each of them, high quality papers are provided. The main topic of the conference was Global Product Development. This includes technical, organizational, informational, theoretical, environmental, performance evaluation, knowledge management, and collaborative aspects. Special sessions were related to innovation, in particular extraction of knowledge from patents.
Download or read book Advanced Manufacturing Processes IV written by Volodymyr Tonkonogyi and published by Springer Nature. This book was released on 2022-09-08 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely snapshot of innovative research and developments at the interface between manufacturing, materials and mechanical engineering, and quality assurance. It covers various manufacturing processes, such as grinding, boring, milling, broaching, coatings, including additive manufacturing. It focuses on cutting, abrasive, stamping-drawing processes, shot peening, and complex treatment. It describes temperature distribution, twisting deformation, defect formation process, failure analysis, as well as the convective heat exchange and non-uniform nanocapillary fluid cooling, highlighting the growing role of quality control, integrated management systems, and economic efficiency evaluation. It also covers vibration damping, dynamic behavior, failure probability, and strength performance methods for aviation, heterogeneous, permeable porous, and other types of materials. Gathering the best papers presented at the 4th Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2022), held in Odessa, Ukraine, on September 6–9, 2022, this book offers a timely overview and extensive information on trends and technologies in manufacturing, mechanical, and materials engineering, and quality assurance. It is also intended to facilitate communication and collaboration between different groups working on similar topics and to offer a bridge between academic and industrial researchers.
Download or read book Smart Product Engineering written by Michael Abramovici and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of papers in this book comprises the proceedings of the 23rd CIRP Design Conference held between March 11th and March 13th 2013 at the Ruhr-Universität Bochum in Germany. The event was organized in cooperation with the German Academic Society for Product Development – WiGeP. The focus of the conference was on »Smart Product Engineering«, covering two major aspects of modern product creation: the development of intelligent (“smart”) products as well as the new (“smart”) approach of engineering, explicitly taking into account consistent systems integration. Throughout the 97 papers contained in these proceedings, a range of topics are covered, amongst them the different facets and aspects of what makes a product or an engineering solution “smart”. In addition, the conference papers investigate new ways of engineering for production planning and collaboration towards Smart Product Engineering. The publications provide a solid insight into the pressing issues of modern digital product creation facing increasing challenges in a rapidly changing industrial environment. They also give implicit advice how a “smart” product or engineering solution (processes, methods and tools) needs to be designed and implemented in order to become successful.
