Download or read book VLSI Design Environments written by George Zobrist and published by CRC Press. This book was released on 2000-04-17 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI Design Environments investigates design alternatives such as object oriented data modelling. The difficulty of automating chip architecture designs is caused by the complexity of the problem. The explosion of design decions make a heuristic approach necessary. PLAYOUT aims at the solution of system problems based on hierarchy, top-down planning, silicon complier presentations, advances in encoding logic synthesis and a microarchitecre and logic optimization system. PLAYOUT supports the physical design from entering the structure of digital systems to the generation of the mask. The concept for autonomous tools with a clear interface to the network description and the simple interface to the graphics is presented. This enables the designer to have a great influence on the configuration of the placement of the schematic diagram. Substantial progress is being made in behavioural and logic synthesis, both of which depend upon specifications.
Download or read book EDA for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive overview of the design automation algorithms, tools, and methodologies used to design integrated circuits, the Electronic Design Automation for Integrated Circuits Handbook is available in two volumes. The second volume, EDA for IC Implementation, Circuit Design, and Process Technology, thoroughly examines real-time logic to GDSII (a file format used to transfer data of semiconductor physical layout), analog/mixed signal design, physical verification, and technology CAD (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability at the nanoscale, power supply network design and analysis, design modeling, and much more. Save on the complete set.
Download or read book The Proceedings of the European Design Automation Conference written by and published by . This book was released on 1990 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Design Automation for IC Implementation Circuit Design and Process Technology written by Luciano Lavagno and published by CRC Press. This book was released on 2017-02-03 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology thoroughly examines real-time logic (RTL) to GDSII (a file format used to transfer data of semiconductor physical layout) design flow, analog/mixed signal design, physical verification, and technology computer-aided design (TCAD). Chapters contributed by leading experts authoritatively discuss design for manufacturability (DFM) at the nanoscale, power supply network design and analysis, design modeling, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on 3D circuit integration and clock design Offering improved depth and modernity, Electronic Design Automation for IC Implementation, Circuit Design, and Process Technology provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book Proceedings of the Estonian Academy of Sciences Engineering written by and published by . This book was released on 2001-12 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Reconfigurable Network on Chip Design Innovations for Computational Processing and Communication written by Shen, Jih-Sheng and published by IGI Global. This book was released on 2010-06-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reconfigurable computing brings immense flexibility to on-chip processing while network-on-chip has improved flexibility in on-chip communication. Integrating these two areas of research reaps the benefits of both and represents the promising future of multiprocessor systems-on-chip. This book is the one of the first compilations written to demonstrate this future for network-on-chip design. Through dynamic and creative research into questions ranging from integrating reconfigurable computing techniques, to task assigning, scheduling and arrival, to designing an operating system to take advantage of the computing and communication flexibilities brought about by run-time reconfiguration and network-on-chip, it represents a complete source of the techniques and applications for reconfigurable network-on-chip necessary for understanding of future of this field.
Download or read book Electronic Design Automation for IC System Design Verification and Testing written by Luciano Lavagno and published by CRC Press. This book was released on 2017-12-19 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of two volumes in the Electronic Design Automation for Integrated Circuits Handbook, Second Edition, Electronic Design Automation for IC System Design, Verification, and Testing thoroughly examines system-level design, microarchitectural design, logic verification, and testing. Chapters contributed by leading experts authoritatively discuss processor modeling and design tools, using performance metrics to select microprocessor cores for integrated circuit (IC) designs, design and verification languages, digital simulation, hardware acceleration and emulation, and much more. New to This Edition: Major updates appearing in the initial phases of the design flow, where the level of abstraction keeps rising to support more functionality with lower non-recurring engineering (NRE) costs Significant revisions reflected in the final phases of the design flow, where the complexity due to smaller and smaller geometries is compounded by the slow progress of shorter wavelength lithography New coverage of cutting-edge applications and approaches realized in the decade since publication of the previous edition—these are illustrated by new chapters on high-level synthesis, system-on-chip (SoC) block-based design, and back-annotating system-level models Offering improved depth and modernity, Electronic Design Automation for IC System Design, Verification, and Testing provides a valuable, state-of-the-art reference for electronic design automation (EDA) students, researchers, and professionals.
Download or read book Advanced Simulation and Test Methodologies for VLSI Design written by G. Russell and published by Springer Science & Business Media. This book was released on 1989-02-28 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Harnessing Performance Variability in Embedded and High performance Many Multi core Platforms written by William Fornaciari and published by Springer. This book was released on 2018-10-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the art of industrial and academic research in the architectural design of heterogeneous, multi/many-core processors. The authors describe methods and tools to enable next-generation embedded and high-performance heterogeneous processors to confront cost-effectively the inevitable variations by providing Dependable-Performance: correct functionality and timing guarantees throughout the expected lifetime of a platform under thermal, power, and energy constraints. Various aspects of the reliability problem are discussed, at both the circuit and architecture level, the intelligent selection of knobs and monitors in multicore platforms, and systematic design methodologies. The authors demonstrate how new techniques have been applied in real case studies from different applications domain and report on results and conclusions of those experiments. Enables readers to develop performance-dependable heterogeneous multi/many-core architectures Describes system software designs that support high performance dependability requirements Discusses and analyzes low level methodologies to tradeoff conflicting metrics, i.e. power, performance, reliability and thermal management Includes new application design guidelines to improve performance dependability
Download or read book Design Automation of Quantum Computers written by Rasit O. Topaloglu and published by Springer Nature. This book was released on 2022-12-09 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a comprehensive, state-of-the-art reference to the design automation aspects of quantum computers. Given roadmaps calling for quantum computers with 2000 qubits in a few years, readers will benefit from the practical implementation aspects covered in this book. The authors discuss real hardware to the extent possible. Provides an up-to-date, single-source reference to design automation aspects of quantum computers; Presentation is not just theoretical, but substantiated with real quantum hardware; Covers multi-faceted aspects of quantum computers, providing readers with valuable information, no matter the direction in which technology moves.
Download or read book Correct by Construction Approaches for SoC Design written by Roopak Sinha and published by Springer Science & Business Media. This book was released on 2013-08-23 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an approach for designing Systems-on-Chip such that the system meets precise mathematical requirements. The methodologies presented enable embedded systems designers to reuse intellectual property (IP) blocks from existing designs in an efficient, reliable manner, automatically generating correct SoCs from multiple, possibly mismatching, components.
Download or read book CMOS Indoor Light Energy Harvesting System for Wireless Sensing Applications written by Carlos Manuel Ferreira Carvalho and published by Springer. This book was released on 2015-07-30 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses in detail the CMOS implementation of energy harvesting. The authors describe an integrated, indoor light energy harvesting system, based on a controller circuit that dynamically and automatically adjusts its operation to meet the actual light circumstances of the environment where the system is placed. The system is intended to power a sensor node, enabling an autonomous wireless sensor network (WSN). Although designed to cope with indoor light levels, the system is also able to work with higher levels, making it an all-round light energy harvesting system. The discussion includes experimental data obtained from an integrated manufactured prototype, which in conjunction with a photovoltaic (PV) cell, serves as a proof of concept of the desired energy harvesting system.
Download or read book Fighting Back the Von Neumann Bottleneck with Small and Large Scale Vector Microprocessors written by Matheus Cavalcante and published by BoD – Books on Demand. This book was released on 2023-08-24 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: In his seminal Turing Award Lecture, Backus discussed the issues stemming from the word-at-a-time style of programming inherited from the von Neumann computer. More than forty years later, computer architects must be creative to amortize the von Neumann Bottleneck (VNB) associated with fetching and decoding instructions which only keep the datapath busy for a very short period of time. In particular, vector processors promise to be one of the most efficient architectures to tackle the VNB, by amortizing the energy overhead of instruction fetching and decoding over several chunks of data. This work explores vector processing as an option to build small and efficient processing elements for large-scale clusters of cores sharing access to tightly-coupled L1 memory
Download or read book High Level Synthesis written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on high-level synthesis started over twenty years ago, but lower-level tools were not available to seriously support the insertion of high-level synthesis into the mainstream design methodology. Since then, substantial progress has been made in formulating and understanding the basic concepts in high-level synthesis. Although many open problems remain, high-level synthesis has matured. High-Level Synthesis: Introduction to Chip and System Design presents a summary of the basic concepts and results and defines the remaining open problems. This is the first textbook on high-level synthesis and includes the basic concepts, the main algorithms used in high-level synthesis and a discussion of the requirements and essential issues for high-level synthesis systems and environments. A reference text like this will allow the high-level synthesis community to grow and prosper in the future.
Download or read book Approximate Circuits written by Sherief Reda and published by Springer. This book was released on 2018-12-05 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a comprehensive, state-of-the-art overview of approximate computing, enabling the design trade-off of accuracy for achieving better power/performance efficiencies, through the simplification of underlying computing resources. The authors describe in detail various efforts to generate approximate hardware systems, while still providing an overview of support techniques at other computing layers. The book is organized by techniques for various hardware components, from basic building blocks to general circuits and systems.
Download or read book Readings in Object Oriented Database Systems written by Stanley B. Zdonik and published by Morgan Kaufmann. This book was released on 1990 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive collection is a survey of research in object-oriented databases, offering a substantive overview of the field, section introductions, and over 40 research papers presented in their original scope and detail. The balanced selection of articles presents a confluence of ideas from both the language and database research communities that have contributed to the object-oriented paradigm. The editors develop a general definition and model for object-oriented databases and relate significant research efforts to this framework. Further, the collection explores the fundamental notions behind object-oriented databases, semantic data models, implementation of object-oriented systems, transaction processing, interfaces, and related approaches. Research and theory are balanced by applications to CAD systems, programming environments, and office information systems.
Download or read book Modeling and Simulation of Invasive Applications and Architectures written by Sascha Roloff and published by Springer. This book was released on 2019-05-30 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers two main topics: First, novel fast and flexible simulation techniques for modern heterogeneous NoC-based multi-core architectures. These are implemented in the full-system simulator called InvadeSIM and designed to study the dynamic behavior of hundreds of parallel application programs running on such architectures while competing for resources. Second, a novel actor-oriented programming library called ActorX10, which allows to formally model parallel streaming applications by actor graphs and to analyze predictable execution behavior as part of so-called hybrid mapping approaches, which are used to guarantee real-time requirements of such applications at design time independent from dynamic workloads by a combination of static analysis and dynamic embedding.
