Download or read book Proceedings of the 12th International Symposium Continuous Surface Mining Aachen 2014 written by Christian Niemann-Delius and published by Springer. This book was released on 2014-09-20 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.
Download or read book Proceedings of the 27th International Symposium on Mine Planning and Equipment Selection MPES 2018 written by Eleonora Widzyk-Capehart and published by Springer. This book was released on 2019-02-21 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents research papers discussing the latest developments and findings in the fields of mining, machinery, automation and environmental protection. It includes contributions from authors from over 20 countries, with backgrounds in computer science, mining engineering, technology and management, and hailing from the government, industry and academia. It is of interest to scientists, engineers, consultants and government staff who are responsible for the development and implementation of innovative approaches, techniques and technologies in the mineral industries. Covering the latest advances in fundamental research, it also appeals to academic researchers.
Download or read book Advances in Technical Diagnostics written by Anna Timofiejczuk and published by Springer. This book was released on 2017-09-04 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an overview of recent theories and methods for machinery diagnostics applied to machinery maintenance. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work discussed at the International Congress on Technical Diagnostics, ICTD2016, held on September 12 – 16, 2016, in Gliwice, Poland. The book covers a broad range of topics, including machines operating in non-stationary conditions, and examples from different industrial fields of mechanical, civil, computer and electronic engineering as well as the medical, food, automotive, and mining industries. By presenting state-of-the-art diagnostic solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals as well as a bridge to facilitate communication and collaboration between the two groups.
Download or read book Cyclostationarity Theory and Methods III written by Fakher Chaari and published by Springer. This book was released on 2017-02-25 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers contributions presented at the 9th Workshop on Cyclostationary Systems and Their Applications, held in Gródek nad Dunajcem, Poland in February 2016. It includes both theory-oriented and practice-oriented chapters. The former focus on heavy-tailed time series and processes, PAR models, rational spectra for PARMA processes, covariance invariant analysis, change point problems, and subsampling for time series, as well as the fraction-of-time approach, GARMA models and weak dependence. In turn, the latter report on case studies of various mechanical systems, and on stochastic and statistical methods, especially in the context of damage detection. The book provides students, researchers and professionals with a timely guide to cyclostationary systems, nonstationary processes and relevant engineering applications.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Anna Timofiejczuk and published by Springer. This book was released on 2017-09-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2016, held on September 12 – 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.
Download or read book Advances in Computing and Intelligent Systems written by Harish Sharma and published by Springer Nature. This book was released on 2020-01-03 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers presented at the International Conference on Advancements in Computing and Management (ICACM 2019). Discussing current research in the field of artificial intelligence and machine learning, cloud computing, recent trends in security, natural language processing and machine translation, parallel and distributed algorithms, as well as pattern recognition and analysis, it is a valuable resource for academics, practitioners in industry and decision-makers.
Download or read book Computational and Information Technologies in Science Engineering and Education written by Yuri Shokin and published by Springer. This book was released on 2019-02-20 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th International Conference on Computational and Information Technologies in Science, Engineering and Education, CITech 2018, held in Ust-Kamenogorsk, Kazakhstan, in September 2018. The 25 revised full papers presented were carefully reviewed and selected from 64 submissions. The papers address issues such as mathematical and computer modeling, fundamental problems of mathematics, technological aspects of the applications of parallel computer systems, high level parallel programming languages and systems.
Download or read book Intelligent Systems in Production Engineering and Maintenance III written by Anna Burduk and published by Springer Nature. This book was released on 2023-10-28 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on intelligent methods and solutions in engineering production and maintenance. It describes advanced tools for optimizing production processes, increasing their automation, safety and sustainability. Contributions cover different stages of the production process, such as product design, supply chain, and equipment maintenance and safety. This is one of the two volumes based on the 4th International Conference on Intelligent Systems in Production Engineering and Maintenance, ISPEM 2023, held on September 13-15, 2023, in Wroclaw, Poland.
Download or read book Analysis of a Rotatable Wind Turbine Tower by means of Aero Servo Elastic Load Simulations written by Struve, Achim and published by KIT Scientific Publishing. This book was released on 2021-04-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work highlights how the costs and CO2-emissions of land-based wind turbines can be reduced by means of an innovative and material efficient support structure concept. Thereby the yaw system is placed at the tower base, allowing the whole wind turbine tower to be rotated. The potential of a rotatable inclined lattice tower concept was analysed by means of aero-servo-elastic load simulations in the FAST environment. A balance between different cost aspects revealed significant savings.
Download or read book Rough Sets written by Víctor Flores and published by Springer. This book was released on 2016-09-28 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the International Joint Conference on Rough Sets, IJCRS 2016, held in Santiago de Chile, Chile, in October 2016. The 46 revised full papers presented together with 7 keynotes, tutorials and expert papers were carefully reviewed and selected from 108 submissions. The papers are grouped in topical sections on Rough Sets, Approximation and Granulation; Rough Sets, Non-Determinism and Incompleteness; Rough Sets and Three-way Decisions; Fuzziness and Similarity in Knowledge Representation; Machine Learning and Decision Making; Ranking and Clustering; Derivation and Application of Rules and Trees; Derivation and Application of Feature Subsets.
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Fakher Chaari and published by Springer. This book was released on 2015-07-16 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and technological trends in the field of condition monitoring of machinery working under a broad range of operating conditions. Each chapter, accepted after a rigorous peer-review process, reports on an original piece of work presented and discussed at the 4th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO 2014, held on December 15-16, 2014, in Lyon, France. The contributions have been grouped into three different sections according to the main subfield (signal processing, data mining or condition monitoring techniques) they are related to. The book includes both theoretical developments as well as a number of industrial case studies, in different areas including, but not limited to: noise and vibration; vibro-acoustic diagnosis; signal processing techniques; diagnostic data analysis; instantaneous speed identification; monitoring and diagnostic systems; and dynamic and fault modeling. This book not only provides a valuable resource for both academics and professionals in the field of condition monitoring, it also aims at facilitating communication and collaboration between the two groups.
Download or read book Continuous Surface Mining written by Tad S. Golosinski and published by . This book was released on 1987 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book AACHEN INTERNATIONAL MINING SYMPOSIA AIMS 2014 11 12 06 2014 written by Per Nicolai Martens and published by . This book was released on 2014 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Coal Mining Techniques 2020 written by A.J.S. (Sam) Spearing and published by MDPI. This book was released on 2020-12-15 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coal mining continues to make advances, especially in the areas of safety and environmental protection as a result of mining. This book contains nine peer-reviewed articles on green coal mining that address most of the important issues associated with improving coal mining. These issues include the protection of water above coal mines, both surface and ground water, and the subsidence that occurs during and after mining with methods to limit it and methods of rehabilitation. Additional issues include mine entry and production area support and methods to control gas emissions.
Download or read book Intelligent Systems in Production Engineering and Maintenance written by Anna Burduk and published by Springer. This book was released on 2018-07-31 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wrocław University of Science and Technology and was held in Wrocław (Poland) on 17–18 September 2018. The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 – particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development. The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on: 1. Computer Aided methods in Production Engineering 2. Mining 4.0 and Intelligent Mining Transportation 3. Modelling and Simulation of Production Processes 4. Multi-Faceted Modelling of Networks and Processes 5. Product Design and Product Manufacturing in Industry 4.0 This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.
Download or read book Continuous surface mining written by Carsten Drebenstedt and published by . This book was released on 2001 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rockburst written by Xia-Ting Feng and published by Butterworth-Heinemann. This book was released on 2017-10-19 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rockburst: Mechanisms, Monitoring, Warning and Mitigation invites the most relevant researchers and practitioners worldwide to discuss the rock mechanics phenomenon related to increased stress and energy levels in intact rock introduced by drilling, explosion, blasting and other activities. When critical energy levels are reached, rockbursts can occur causing human and material losses in mining and tunneling environments. This book is the most comprehensive information source in English to cover rockbursts. Comprised of four main parts, the book covers in detail the theoretical concepts related to rockbursts, and introduces the current computational modeling techniques and laboratory tests available. The second part is devoted to case studies in mining (coal and metal) and tunneling environments worldwide. The third part covers the most recent advances in measurement and monitoring. Special focus is given to the interpretation of signals and reliability of systems. The following part addresses warning and risk mitigation through the proposition of a single risk assessment index and a comprehensive warning index to portray the stress status of the rock and a successful case study. The final part of the book discusses mitigation including best practices for distressing and efficiently supporting rock. Designed to provide the most comprehensive coverage, the book will provide practicing mining and tunneling engineers the theoretical background needed to better cope with the phenomenon, practical advice from case studies and practical mitigation actions and techniques. Academics in rock mechanics will appreciate this complete reference to rockburst, which features how to analyze stress signals and use computational modeling more efficiently. Offers understanding of the fundamental theoretical concepts of rockbursts Explores how to analyze signals from current monitoring systems Shows how to apply mitigating techniques in current work Identifies characteristics that should be measured in order to detect rockburst risk
