Download or read book Publications in Engineering written by and published by . This book was released on 2002 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 1904 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A New Direction for China s Defense Industry written by Evan S. Medeiros and published by Rand Corporation. This book was released on 2005-12-19 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the early 1980s, a prominent and consistent conclusion drawn from research on China's defense-industrial complex has been that China's defense-production capabilities are rife with weaknesses and limitations. This study argues for an alternative approach: From the vantage point of 2005, it is time to shift the focus of current research to the gradual improvements in and the future potential of China's defense-industrial complex. The study found that China's defense sectors are designing and producing a wide range of increasingly advanced weapons that, in the short term, are relevant to a possible conflict over Taiwan but also to China's long-term military presence in Asia. Part of a larger RAND Project AIR FORCE study on Chinese military modernization, this study examines the current and future capabilities of China's defense industry. The goals of this study are to 1.
Download or read book Arsenic Treatment Technologies for Soil Waste and Water written by and published by DIANE Publishing. This book was released on 2002 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification of Metals by Ion Beams written by R. P. M. Procter and published by London : Elsevier Applied Science ; New York : Sole distributor in the USA and Canada, Elsevier Science Publishing Company. This book was released on 1987 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing and Application of Stainless Steels written by Andrea Di Schino and published by MDPI. This book was released on 2020-04-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stainless steels represent a quite interesting material family, both from a scientific and commercial point of view, following to their excellent combination in terms of strength and ductility together with corrosion resistance. Thanks to such properties, stainless steels have been indispensable for the technological progress during the last century and their annual consumption increased faster than other materials. They find application in all these fields requiring good corrosion resistance together with ability to be worked into complex geometries. Despite to their diffusion as a consolidated materials, many research fields are active regarding the possibility to increase stainless steels mechanical properties and corrosion resistance by grain refinement or by alloying by interstitial elements. At the same time innovations are coming from the manufacturing process of such a family of materials, also including the possibility to manufacture them starting from metals powder for 3D printing. The Special Issue scope embraces interdisciplinary work covering physical metallurgy and processes, reporting about experimental and theoretical progress concerning microstructural evolution during processing, microstructure-properties relations, applications including automotive, energy and structural.
Download or read book Characterization of Minerals Metals and Materials 2019 written by Bowen Li and published by Springer. This book was released on 2019-02-13 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection gives broad and up-to-date results in the research and development of materials characterization and processing. Topics covered include characterization methods, ferrous materials, non-ferrous materials, minerals, ceramics, polymer and composites, powders, extraction, microstructure, mechanical behavior, processing, corrosion, welding, solidification, magnetic, electronic, environmental, nano-materials, and advanced materials The book explores scientific processes to characterize materials using modern technologies, and focuses on the interrelationships and interdependence among processing, structure, properties, and performance of materials.
Download or read book Verified Synthesis of Zeolitic Materials written by H. Robson and published by Gulf Professional Publishing. This book was released on 2001-06-26 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolite synthesis is an active field of research. As long as this continues, new phases will be discovered and new techniques for preparing existing phases will appear. This edition of Verified Synthesis of Zeolitic Materials contains all the recipes from the first edition plus 24 new recipes. Five new introductory articles have been included plus those from the first edition, some of which have been substantially revised. The XRD patterns have been recorded using different instrument settings from those in the first edition and are intended to conform to typical X-ray diffraction practice. In most cases, only the XRD pattern for the productas synthesised is printed here. The exceptions are those phases which show marked changes in the XRD pattern upon calcination.
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.
Download or read book Recent Advances in Technology Research and Education written by Dumitru Luca and published by Springer. This book was released on 2017-09-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the 16th International Conference on Global Research and Education Inter-Academia 2017 hosted by Alexandru Ioan Cuza University of Iași, Romania from 25 to 28 September 2017. It is the third volume in the series, following the editions from 2015 and 2016. Fundamental and applied research in natural sciences have led to crucial developments in the ongoing 4th global industrial revolution, in the course of which information technology has become deeply embedded in industrial management, research and innovation – and just as deeply in education and everyday life. Materials science and nanotechnology, plasma and solid state physics, photonics, electrical and electronic engineering, robotics and metrology, signal processing, e-learning, intelligent and soft computing have long since been central research priorities for the Inter-Academia Community (I-AC) – a body comprising 14 universities and research institutes from Japan and Central/East-European countries that agreed, in 2002, to coordinate their research and education programs so as to better address today’s challenges. The book is intended for use in academic, government, and industrial R&D departments as a reference tool in research and technology education. The 42 peer-reviewed papers were written by more than 119 leading scientists from 14 countries, most of them affiliated to the I-AC.
Download or read book Surfaces and Interfaces in Nanostructured Materials and Trends in LIGA Miniaturization and Nanoscale Materials written by Sharmila M. Mukhopadhyay and published by Wiley-TMS. This book was released on 2004-03 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: At head of title: MPMD Fifth Global Innovations Proceedings.
Download or read book Surface Modification of Metals by Ion Beams 1984 written by Gerhard K. Wolf and published by Elsevier Sequoia S.A.. This book was released on 1985-01-01 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Automatic Control written by Bo Huang and published by Springer. This book was released on 2016-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of instrument electrical and automatic control system, the 5th International Conference on Electrical Engineering and Automatic Control (CEEAC) was established at the crossroads of information technology and control technology, and seeks to effectively apply information technology to a sweeping trend that views control as the core of intelligent manufacturing and life. This book takes a look forward into advanced manufacturing development, an area shaped by intelligent manufacturing. It highlights the application and promotion of process control represented by traditional industries, such as the steel industry and petrochemical industry; the technical equipment and system cooperative control represented by robot technology and multi-axis CNC; and the control and support of emerging process technologies represented by laser melting and stacking, as well as the emerging industry represented by sustainable and intelligent life. The book places particular emphasis on the micro-segments field, such as intelligent micro-grids, new energy vehicles, and the Internet of Things.
Download or read book Alkali Aggregate Reaction in Concrete written by Marc-Andre Berube and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preservation of Archives in Tropical Climates written by René Teygeler and published by . This book was released on 2001 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
