Download or read book Proceedings of the 10th mechatronics forum biennial international conference Malvern PA June 19 21 2006 written by Institution of Mechanical Engineers and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of International Conference on Thermofluids written by Shripad Revankar and published by Springer Nature. This book was released on 2020-11-21 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected and peer-reviewed proceedings of the International Conference on Thermofluids (KIIT Thermo 2020). It focuses on the latest studies and findings in the areas of fluid dynamics, heat transfer, thermodynamics, and combustion. Some of the topics covered in the book include electronic cooling, HVAC system analysis, inverse heat transfer, combustion, nano-fluids, multiphase flow, high-speed flow, and shock waves. The book includes both experimental and numerical studies along with a few review chapters from experienced researchers, and is expected to lead to new research in this important area. This book is of interest to students, researchers as well as practitioners working in the areas of fluid dynamics, thermodynamics, and combustion.

Download or read book CMBEBIH 2019 written by Almir Badnjevic and published by Springer. This book was released on 2019-05-10 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the International Conference on Medical and Biological Engineering, which was held from 16 to 18 May 2019 in Banja Luka, Bosnia and Herzegovina. Focusing on the goal to ‘Share the Vision’, it highlights the latest findings, innovative solutions and emerging challenges in the field of Biomedical Engineering. The book covers a wide range of topics, including: biomedical signal processing, medical physics, biomedical imaging and radiation protection, biosensors and bioinstrumentation, bio-micro/nano technologies, biomaterials, biomechanics, robotics and minimally invasive surgery, and cardiovascular, respiratory and endocrine systems engineering. Further topics include bioinformatics and computational biology, clinical engineering and health technology assessment, health informatics, e-health and telemedicine, artificial intelligence and machine learning in healthcare, as well as pharmaceutical and genetic engineering. Given its scope, the book provides academic researchers, clinical researchers and professionals alike with a timely reference guide to measures for improving the quality of life and healthcare.

Download or read book Mechatronics in Action written by David Bradley and published by Springer Science & Business Media. This book was released on 2010-04-15 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics in Action’s case-study approach provides the most effective means of illustrating how mechatronics can make products and systems more flexible, more responsive and possess higher levels of functionality than would otherwise be possible. The series of case studies serves to illustrate how a mechatronic approach has been used to achieve enhanced performance through the transfer of functionality from the mechanical domain to electronics and software. Mechatronics in Action not only provides readers with access to a range of case studies, and the experts’ view of these, but also offers case studies in course design and development to support tutors in making the best and most effective use of the technical coverage provided. It provides, in an easily accessible form, a means of increasing the understanding of the mechatronic concept, while giving both students and tutors substantial technical insight into how this concept has been developed and used.

Download or read book Advances in Renewable Hydrogen and Other Sustainable Energy Carriers written by Abdallah Khellaf and published by Springer Nature. This book was released on 2020-08-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines a broad range of advances in hydrogen energy and alternative fuel developments and their role in the energy transition. The respective contributions were presented at the International Symposium on Sustainable Hydrogen, held in Algiers, Algeria on November 27-28, 2019. The transition from non-renewable polluting energy to sustainable green energy requires not only new energy sources but also new storage techniques and smart energy management. This situation has sparked renewed interest in hydrogen and alternative fuels, as they could help meet these needs. Indeed, hydrogen can not only be used as a clean energy vector or as an alternative fuel, but also as a storage medium or as an intermediary that enables improved energy management. This text offers a valuable reference guide for those working in the professional energy sector, as well as for students and instructors in academia who want to learn about the state of the art and future directions in the fields of hydrogen energy, alternative fuels and sustainable energy development.

Download or read book 7th International Conference on the Development of Biomedical Engineering in Vietnam BME7 written by Vo Van Toi and published by Springer. This book was released on 2019-06-05 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the 7th International Conference on the Development of Biomedical Engineering in Vietnam which was held from June 27-29, 2018 in Ho Chi Minh City. The volume reflects the progress of Biomedical Engineering and discusses problems and solutions. It aims to identify new challenges, and shaping future directions for research in biomedical engineering fields including medical instrumentation, bioinformatics, biomechanics, medical imaging, drug delivery therapy, regenerative medicine and entrepreneurship in medical devices.

Download or read book Diesel and Gasoline Engines written by Richard Viskup and published by . This book was released on 2020-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internal combustion engine was invented around 1790 by various scientists and engineers worldwide. Since then the engines have gone through many modifications and improvements. Today, different applications of engines form a significant technological importance in our everyday lives, leading to the evolution of our modern civilization. The invention of diesel and gasoline engines has definitely changed our lifestyles as well as shaped our priorities. The current engines serve innumerable applications in various types of transportation, in harsh environments, in construction, in diverse industries, and also as back-up power supply systems for hospitals, security departments, and other institutions. However, heavy duty or light duty engines have certain major disadvantages, which are well known to everyone. With the increasing usage of diesel and gasoline engines, and the constantly rising number of vehicles worldwide, the main concern nowadays is engine exhaust emissions. This book looks at basic phenomena related to diesel and gasoline engines, combustion, alternative fuels, exhaust emissions, and mitigations.

Download or read book Techno Societal 2018 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2019-11-06 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2018: the 2nd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Download or read book Mechatronic Futures written by Peter Hehenberger and published by Springer. This book was released on 2016-06-10 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a comprehensive overview of the challenges, risks and options facing the future of mechatronics, this book provides insights into how these issues are currently assessed and managed. Building on the previously published book ‘Mechatronics in Action,’ it identifies and discusses the key issues likely to impact on future mechatronic systems. It supports mechatronics practitioners in identifying key areas in design, modeling and technology and places these in the wider context of concepts such as cyber-physical systems and the Internet of Things. For educators it considers the potential effects of developments in these areas on mechatronic course design, and ways of integrating these. Written by experts in the field, it explores topics including systems integration, design, modeling, privacy, ethics and future application domains. Highlighting novel innovation directions, it is intended for academics, engineers and students working in the field of mechatronics, particularly those developing new concepts, methods and ideas.

Download or read book Best Practices in State and Regional Innovation Initiatives written by National Research Council and published by National Academies Press. This book was released on 2013-06-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the policy discussion about stimulating innovation has focused on the federal level. This study focuses on the significant activity at the state level, with the goal of improving the public's understanding of key policy strategies and exemplary practices. Based on a series of workshops and conferences that brought together policymakers along with leaders of industry and academia in a select number of states, the study highlights a rich variety of policy initiatives underway at the state and regional level to foster knowledge based growth and employment. Perhaps what distinguishes this effort at the state level is most of all the high degree of pragmatism. Operating out of necessity, innovation policies at the state level often involve taking advantage of existing resources and recombining them in new ways, forging innovative partnerships among universities, industry and government organizations, growing the skill base, and investing in the infrastructure to develop new technologies and new industries. Many of these initiatives are being guided by leaders from the private sector and universities. The objective of Best Practices in State and Regional Innovation Initiatives: Competing in the 21st Century is not to do an empirical review of the inputs and outputs of various state programs. Nor is it to evaluate which programs are superior. Indeed, some of the notable successes, such as the Albany nanotechnology cluster, represent a leap of leadership, investment, and sustained commitment that has had remarkable results in an industry that is actively pursued by many countries. The study's goal is to illustrate the approaches taken by a variety of highly diverse states as they confront the increasing challenges of global competition for the industries and jobs of today and tomorrow.

Download or read book New Trends in Business Information Systems and Technology written by Rolf Dornberger and published by Springer Nature. This book was released on 2020-07-07 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected examples of digitalization in the age of digital change. It is divided into two sections: “Digital Innovation,” which features new technologies that stimulate and enable new business opportunities; and “Digital Business Transformation,” comprising business and management concepts that employ specific technological solutions for their practical implementation. Combining new insights from research, teaching and management, including digital transformation, e-business, knowledge representation, human-computer interaction, and business optimization, the book highlights the breadth of research as well as its meaningful and relevant transfer into practice. It is intended for academics seeking inspiration, as well as for leaders wanting to tap the potential of the latest trends to take society and their business to the next level.

Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.

Download or read book Factories of the Future written by Tullio Tolio and published by Springer. This book was released on 2019-02-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license.This book presents results relevant in the manufacturing research field, that are mainly aimed at closing the gap between the academic investigation and the industrial application, in collaboration with manufacturing companies. Several hardware and software prototypes represent the key outcome of the scientific contributions that can be grouped into five main areas, representing different perspectives of the factory domain:1) Evolutionary and reconfigurable factories to cope with dynamic production contexts characterized by evolving demand and technologies, products and processes.2) Factories for sustainable production, asking for energy efficiency, low environmental impact products and processes, new de-production logics, sustainable logistics.3) Factories for the People who need new kinds of interactions between production processes, machines, and human beings to offer a more comfortable and stimulating working environment.4) Factories for customized products that will be more and more tailored to the final user’s needs and sold at cost-effective prices.5) High performance factories to yield the due production while minimizing the inefficiencies caused by failures, management problems, maintenance.This books is primarily targeted to academic researchers and industrial practitioners in the manufacturing domain.

Download or read book World Congress on Medical Physics and Biomedical Engineering 2018 written by Lenka Lhotská and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the IUPESM World Congress on Biomedical Engineering and Medical Physics, a tri-annual high-level policy meeting dedicated exclusively to furthering the role of biomedical engineering and medical physics in medicine. The book offers papers about emerging issues related to the development and sustainability of the role and impact of medical physicists and biomedical engineers in medicine and healthcare. It provides a unique and important forum to secure a coordinated, multileveled global response to the need, demand, and importance of creating and supporting strong academic and clinical teams of biomedical engineers and medical physicists for the benefit of human health.

Download or read book Introduction to Mechanical Engineering written by J. Paulo Davim and published by Springer. This book was released on 2018-04-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook fosters information exchange and discussion on all aspects of introductory matters of modern mechanical engineering from a number of perspectives including: mechanical engineering as a profession, materials and manufacturing processes, machining and machine tools, tribology and surface engineering, solid mechanics, applied and computational mechanics, mechanical design, mechatronics and robotics, fluid mechanics and heat transfer, renewable energies, biomechanics, nanoengineering and nanomechanics. At the end of each chapter, a list of 10 questions (and answers) is provided.

Download or read book Product Realization written by Mileta Tomovic and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product Realization: A Comprehensive Approach is based on selected papers presented at the International Conference on Comprehensive Product Realization 2007 (ICCPR2007). The extended papers will provide the opportunity for scholars from all around the world to discuss their academic programs, identify research opportunities, and initiate joint research programs in the area of comprehensive product realization. Engineering design has evolved from an isolated semi-empirical activity to a highly interconnected, multidisciplinary product realization collaborative process. The scope of the book will focus on a number of themes within the framework of the conference that are deemed essential to educating the next generation of students and practicing engineers in the area of product realization.

Download or read book Digital Science written by Tatiana Antipova and published by Springer. This book was released on 2018-10-18 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 2018 International Conference on Digital Science (DSIC’18), held in Budva, Montenegro, on October 19 – 21, 2018. DSIC’18 was an international forum for researchers and practitioners to present and discuss the latest innovations, trends, results, experiences and concerns in Digital Science. The main goal of the Conference was to efficiently disseminate original findings in the natural and social sciences, art & the humanities. The contributions address the following topics: Digital Agriculture & Food Technology Digital Art & Humanities Digital Economics Digital Education Digital Engineering Digital Environmental Sciences Digital Finance, Business & Banking Digital Health Care, Hospitals & Rehabilitation Digital Media Digital Medicine, Pharma & Public Health Digital Public Administration Digital Technology & Applied Sciences Digital Virtual Reality