Download or read book Proceedings of Mechanical Engineering Research Day 2015 written by Mohd Zulkefli Bin Selamat; Reduan Bin Mat Dan; Abd Rahman Bin Dullah; Abd Salam Bin Md Tahir; Abdul Munir Hidayat Syah Lubis; Abdul Talib Bin Din; Ahmad Anas Bin Yusof; Ahmad Kamal Bin Mat Yamin; Ahmad Rivai; Aliza Binti Che Amran; Azma Putra; Cheng See Yuan; Chong Shin Horng; Faiz Redza Bin Ramli; Fatimah Al-Zahrah Binti Mohd Sa'at; Herdy Rusnandi; Hilmi Bin Amiruddin; Imran Syakir Bin Mohamad; Mariam Binti Md Ghazaly; Md Isa Bin Ali; Md. Fahmi Bin Abd. Samad @ Mahmood; Md Radzai Bin Said; Mohd Ahadlin Bin Mohd Daud; Mohd Asri Bin Yusuff; Mohd Azli Bin Salim; Mohd Azman Bin Abdullah; Mohd Fadzli Bin Abdollah; Mohd Haizal Bin Mohd Husin; Mohd Juzaila Bin Abd. Latif; Mohd Khairi Bin Mohamad Nor; Mohd Nizam Bin Sudin; Mohd Rizal Bin Alkahari; Mohd Zaid Bin Akop; Nona Merry Merpati Mitan; Nor Azmmi Bin Masripan; Norasra Binti A.Rahman; Noreffendy Bin Tamaldin; Nur Rashid Bin Mat Nuri @ Md Din; Omar Bin Bapokutty; Rafidah Binti Hasa; Rainah Binti Ismail; Roszaidi Bin Ramlan; Safarudin Gazali Herawan; Shamsul Anuar Bin Shamsudin; Siti Hajar Binti Sheikh Md. Fadzullah; Siti Nurhaida Binti Khalil; Sivakumar A/L Dhar Malingam; Sushella Edayu Binti Mat Kamal; Tan Chee Fai; Tee Boon Tuan; Umar Al-Amani Bin Haji Azlan; Zairulazha Bin Zainal; Zakiah Binti Halim and published by Centre for Advanced Research on Energy. This book was released on 2015-03-31 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the Mechanical Engineering Research Day 2015 (MERD'15) - Melaka, Malaysia on 31 March 2015.

Download or read book Proceedings of Mechanical Engineering Research Day 2016 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2016-03-31 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the Mechanical Engineering Research Day 2016 (MERD'16) - Melaka, Malaysia on 31 March 2016.

Download or read book Proceedings of Mechanical Engineering Research Day 2017 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2017-05-29 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the Mechanical Engineering Research Day 2017 (MERD'17) - Melaka, Malaysia on 30 March 2017.

Download or read book Proceedings of Mechanical Engineering Research Day 2018 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2018-05-16 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the 5th Mechanical Engineering Research Day (MERD'18) - Kampus Teknologi UTeM, Melaka, Malaysia on 03 May 2018.

Download or read book Proceedings of Mechanical Engineering Research Day 2019 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2019-08-05 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the 6th Mechanical Engineering Research Day (MERD'19) - Kampus Teknologi UTeM, Melaka, Malaysia on 31 July 2019.

Download or read book Proceedings of Mechanical Engineering Research Day 2022 written by Amrik Singh Phuman Singh and published by UTeM Press. This book was released on 2022-08-31 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access e-proceeding is a compilation of 134 articles presented at the 8th Mechanical Engineering Research Day (MERD'22) - Kampus Teknologi UTeM, Melaka, Malaysia on 13 July 2022.

Download or read book Proceedings of Mechanical Engineering Research Day 2020 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2020-12-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of 170 articles presented at the 7th Mechanical Engineering Research Day (MERD'20) - Kampus Teknologi UTeM (virtual), Melaka, Malaysia on 16 December 2020.

Download or read book Proceedings of SAKURA Symposium on Mechanical Science and Engineering 2017 written by Mohd Fadzli Bin Abdollah and published by Centre for Advanced Research on Energy. This book was released on 2017-11-10 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book is a compilation of papers presented at the SAKURA Symposium on Mechanical Science and Engineering 2017 (SAKURA2017) - Nagoya, Japan on 12 September 2017.

Download or read book Proceedings of Asia International Conference on Tribology 2018 written by Mohd Fadzli Bin Abdollah and published by Malaysian Tribology Society. This book was released on 2018-09-17 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This ebook is a compilation of 234 papers presented at the 6th Asia International Conference on Tribology (ASIATRIB2018): Kuching, Sarawak - Malaysia from 17 to 20 September 2018.

Download or read book Proceedings of Innovative Research and Industrial Dialogue 2016 written by and published by Centre for Advanced Research on Energy. This book was released on 2017-06-07 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Innovative Research and Industrial Dialogue 2016 (IRID’16) organized by Advanced Manufacturing Centre (AMC) of the Faculty of Manufacturing Engineering of UTeM which is held in Main Campus, Universiti Teknikal Malaysia Melaka on 20 December 2016. The open access e-proceeding contains a compilation of 96 selected manuscripts from this Research event.

Download or read book ICAMDMS 2024 written by Rangasamy Rudramoorthy and published by European Alliance for Innovation. This book was released on 2024-06-17 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: We, the Department of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India, are delighted to introduce the proceedings of the International Conference on the Advancements in Materials, Design, and Manufacturing for Sustainable Development ICAMDMS 2024. The conference proceedings encapsulate the knowledge of diverse insights and cutting-edge research shared by the participants of the conference in significant domains such as materials, design, manufacturing, industrial and production engineering converging on the theme of sustainable development. The technical program of ICAMDMS 2024 consists of 46 full papers, including nine oral presentation sessions at the main conference themes. The conference themes are: Track 1 – Advanced Materials; Track 2 - Design; Track 3 - Manufacturing; and Track 4 – Industrial and Production Engineering. Aside from the high-quality technical paper presentations, the technical program also featured eight keynote lectures. The eight keynote speakers are (1) Dr. Redouane Zitoune from Paul Sabatier University, Toulose-III, France, (2) Dr. Jinyang Xu from Shanghai Jiao Tong University, China, (3) Dr. Juan Pablo from Escobedo-Daiz UNSW, Canberra, Australia, (4) Dr. Santhakumar Mohan from IIT Palakkad, (5) Dr. Afzaal Ahmed from IIT Palakkad, (6) Dr. Ravi K R from IIT Jodhpur, (7) Mr. Vijay V from Lakshmi Machine Works – Advanced Technology Center, Coimbatore and (8) Ms. Thangamalar from Research and Development, Tractors and Farm Equipment (TAFE), Chennai. The Conference was enlightened with an industrial talk by Dr. S. Chandrasekar, Corporate Director, Roots Group of Companies, Coimbatore. ICAMDMS 2024 was sponsored by Propel Industries Pvt. Ltd., Coimbatore, PSG Centre for Academic Research and Excellence, Coimbatore, Janatics India Pvt. Ltd., Coimbatore, Baarga Die Castings, Coimbatore, Crossfields Water Purifiers Pvt. Ltd., Coimbatore, TESA Technology, Coimbatore, Guruvayurappan Textile Pvt. Ltd., Udumalpet, Sakthi Gear Products, Coimbatore and 2017-21 and 2018-22 alumni of the Department of Production Engineering. In this compendium, one can find a wealth of knowledge covering advanced materials, innovative designs, and sustainable manufacturing practices. We extend our gratitude to the Management & Principal - PSGCT, Head of the Department – Production Engineering, ICAMDMS 2024 advisory committee, conference committee, sponsors, participants, faculty members, staff, and students who have contributed to the ICAMDMS 2024 and made it a platform for meaningful discourse. As we delve into this intellectual journey, we anticipate that this proceeding will be a valuable resource for researchers, academicians, and professionals worldwide, fostering collaboration and inspiring future endeavors toward achieving a sustainable environment. Dr R Rudramoorthy, Dr. M. Senthilkumar, Dr. M. R. Pratheesh Kumar, Dr. J. Pradeep Kumar Dr. R. Rajamani and Dr.J.Baskaran

Download or read book Tribological Study of Nanoparticles Enriched Bio based Lubricants for Piston Ring Cylinder Interaction written by Mubashir Gulzar and published by Springer. This book was released on 2018-03-30 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the tribological viability of bio-based base stock to which different nanoparticles were incorporated for engine piston-ring–cylinder-liner interaction. It determines experimentally the effects of lubricating oil conditions (new and engine-aged) on the friction and wear of the materials used for piston rings and cylinder liners. The specific base stock examined was a trimethylolpropane (TMP) ester derived from palm oil, and the nanoparticles were used as additives to obtain tribologically enhanced bio-based lubricants. The overall analysis of the results demonstrated the potential of nanoparticles to improve the tribological behavior of bio-based base stock for piston-ring–cylinder-liner interaction.

Download or read book Design for Sustainability written by S. M. Sapuan and published by Elsevier. This book was released on 2021-03-13 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design for Sustainability: Green Materials and Processes provides fundamental and practical knowledge surrounding product development applications throughout the entire lifecycle of green materials, ranging from conceptual design, material and manufacturing process selection, and environmental lifecycle assessment. In addition, several topics covering recent advances in the application of sustainable design within the automotive, building and construction, packaging and consumer product industries are also included in this book to provide practical examples of this philosophy in current applications. Lastly, a section on implementation of design for sustainability in education is added to aid readers that wish to introduce this philosophy to younger students. This book will be beneficial to researchers, students in higher education institutions, design practitioners and engineers in private and public sector organization with aspirations to develop sustainable products in the future. Design for sustainability is one of the primary focuses in human advancement nowadays, with the aim of developing products and services that meet the needs of the present without compromising the ability of future generations to meet their own needs. - Provides an overview on materials and process design for sustainability - Discusses theoretical aspects about design for sustainability - Includes a discussion of the most recent advances and applications in design for sustainability

Download or read book Repair of Advanced Composites for Aerospace Applications written by Mohamed Thariq Hameed Sultan and published by CRC Press. This book was released on 2022-03-22 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the repair of polymer composites for critical components in aerospace industries. It also covers the complexities of failure and repair of composites, types of fiber reinforcement and bonding. It includes special topics on damage assessment using on-site inspection (NDT and THz techniques) and automated repair processes for reliability and repeatability. Repair of Advanced Composites for Aerospace Applications also describes the characterization, modelling and simulation of the composites' damage mechanisms with respect to specific environments and applications. Failures associated with various composite repairing techniques for aerospace applications are also covered. Key Features: • Addresses the composites development process including damage detection and repair for aerospace applications. • Covers research on the multi-scale process modelling, material modelling, self-healing, repairing and their analyses. • Concentrates on the repair of composites for weight-sensitive applications in automobiles and aerospace. • Analyses perspectives on materials processing and material design. • Details composite joints, their failure, and operations of aircraft component in various environments. This book is aimed at researchers, professionals and graduate students in composite materials, manufacturing, aerospace engineering, advanced materials design and manufacturing, composite materials repair, and hybrid materials repair.

Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.

Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

Download or read book Nonwovens written by T. Karthik and published by CRC Press. This book was released on 2017-11-22 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonwovens: Process, Structure, Properties and Applications outlines the concept and principle of entire nonwoven manufacturing process starting from raw material selection, web formation techniques, web bonding methods and finishing. Further, characterization and testing of non-woven fabrics, application of non-woven fabrics in different areas such as apparel, aggrotech, geotech, medical and hygiene, automotive textiles, filtration products, home textiles, roofing and construction and packaging were also discussed in detail. The advancements in non-woven manufacturing known as composite non-woven, their properties and applications were discussed in detail. The application of natural fibers in non-woven manufacturing with their advantages and limitations were also discussed in brief. This book is primarily a text book intended for textile technology students in universities and colleges, researchers, industrialists and academicians, as well as professionals in the apparel and textile industry.