Download or read book Advances in Mechanism and Machine Science written by Tadeusz Uhl and published by Springer. This book was released on 2019-06-13 with total page 4203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 15th IFToMM World Congress, which was held in Krakow, Poland, from June 30 to July 4, 2019. Having been organized every four years since 1965, the Congress represents the world’s largest scientific event on mechanism and machine science (MMS). The contributions cover an extremely diverse range of topics, including biomechanical engineering, computational kinematics, design methodologies, dynamics of machinery, multibody dynamics, gearing and transmissions, history of MMS, linkage and mechanical controls, robotics and mechatronics, micro-mechanisms, reliability of machines and mechanisms, rotor dynamics, standardization of terminology, sustainable energy systems, transportation machinery, tribology and vibration. Selected by means of a rigorous international peer-review process, they highlight numerous exciting advances and ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Perception of Vehicle Interior Sounds with Electrified Drives written by Florian Doleschal and published by Logos Verlag Berlin GmbH. This book was released on 2023-01-02 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interior sound of vehicles is a major criterion when buying a new or used vehicle. For both pure-electric and hybrid vehicles, separately audible tonal components severely influence the pleasantness of the interior sound. Previous studies revealed that for sounds of vehicles with electrified drives, besides the tire-road and wind noise components, mainly higher-frequency tonal components influence the pleasantness. Within the present work, the audibility of those components has been determined by a modified version of an auditory masking model. For those vehicles, disturbing sound components are usually prominent during transient driving conditions. Therefore, the temporal changes of psychoacoustic parameters should be considered for the pleasantness prediction. A long short-term memory neural network depicts the relationship between time series of psychoacoustic parameters and a single value of pleasantness, which has been acquired by conducting auditory experiments with both original and augmented electric and hybrid vehicle interior sounds. The general scope of the dissertation is to develop a model of pleasantness for interior sounds of vehicles with electrified drives using a long shortterm memory model approach. The predictions form the basis for constructive countermeasures or active sound design concepts to improve the pleasantness of the interior sound.
Download or read book Environmental Noise Control written by Naveen Garg and published by Springer Nature. This book was released on 2022-03-31 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and up-to-date overview of environmental noise control issues, utilizing specific case studies from India to help explore noise mapping and monitoring, impact analysis, and policy, among other relevant topics. The book provides an extensive review of recent studies, including references, and describes the latest noise monitoring structures. It also addresses heretofore under-emphasized topics, including but not limited to acoustic metrology, Multi Attribute Decision Making (MADM) techniques, and sound insulation utilizing passive control strategies.
Download or read book Proceedings of InterNoise ASME NCAD Noise Control and Acoustics Division Conference at InterNoise 2015 written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012 written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeroacoustic Measurements written by Thomas J. Mueller and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes recent developments in aeroacoustic measurements in wind tunnels and the interpretation of the resulting data. The reader will find the latest measurement techniques described along with examples of the results.
Download or read book Impact of Noise on People written by United States. Federal Aviation Administration. Office of Environmental Quality and published by . This book was released on 1977 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology for a Quieter America written by National Academy of Engineering and published by National Academies Press. This book was released on 2010-10-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exposure to noise at home, at work, while traveling, and during leisure activities is a fact of life for all Americans. At times noise can be loud enough to damage hearing, and at lower levels it can disrupt normal living, affect sleep patterns, affect our ability to concentrate at work, interfere with outdoor recreational activities, and, in some cases, interfere with communications and even cause accidents. Clearly, exposure to excessive noise can affect our quality of life. As the population of the United States and, indeed, the world increases and developing countries become more industrialized, problems of noise are likely to become more pervasive and lower the quality of life for everyone. Efforts to manage noise exposures, to design quieter buildings, products, equipment, and transportation vehicles, and to provide a regulatory environment that facilitates adequate, cost-effective, sustainable noise controls require our immediate attention. Technology for a Quieter America looks at the most commonly identified sources of noise, how they are characterized, and efforts that have been made to reduce noise emissions and experiences. The book also reviews the standards and regulations that govern noise levels and the federal, state, and local agencies that regulate noise for the benefit, safety, and wellness of society at large. In addition, it presents the cost-benefit trade-offs between efforts to mitigate noise and the improvements they achieve, information sources available to the public on the dimensions of noise problems and their mitigation, and the need to educate professionals who can deal with these issues. Noise emissions are an issue in industry, in communities, in buildings, and during leisure activities. As such, Technology for a Quieter America will appeal to a wide range of stakeholders: the engineering community; the public; government at the federal, state, and local levels; private industry; labor unions; and nonprofit organizations. Implementation of the recommendations in Technology for a Quieter America will result in reduction of the noise levels to which Americans are exposed and will improve the ability of American industry to compete in world markets paying increasing attention to the noise emissions of products.
Download or read book International Digital Imaging Correlation Society written by Michael Sutton and published by Springer. This book was released on 2017-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection represents a single volume of technical papers presented at the Annual International DIC Society Conference and SEM Fall Conference organized by the Society for Experimental Mechanics and Sandia National Laboratories and held in Philadelphia, PA, November 7-10, 2016. The volume presents early findings from experimental, standards development and various other investigations concerning digital image correlation - an important area within Experimental Mechanics. The area of Digital Image Correlation has been an integral track within the SEM Annual Conference spearheaded by Professor Michael Sutton from the University of South Carolina. In 2016, the SEM and Sandia joined their collaborative strengths to launch a standing fall meeting focusing specifically on developments in the area of Digital Image Correlation. The contributed papers within this volume span numerous technical aspects of DIC including standards development for the industry.
Download or read book Proceedings of InterNoise ASME NCAD Noise Control and Acoustics Division Conference 2018 written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotorcraft Aeromechanics written by Wayne Johnson and published by Cambridge University Press. This book was released on 2013-04-29 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: A rotorcraft is a class of aircraft that uses large-diameter rotating wings to accomplish efficient vertical take-off and landing. The class encompasses helicopters of numerous configurations (single main rotor and tail rotor, tandem rotors, coaxial rotors), tilting proprotor aircraft, compound helicopters, and many other innovative configuration concepts. Aeromechanics covers much of what the rotorcraft engineer needs: performance, loads, vibration, stability, flight dynamics, and noise. These topics include many of the key performance attributes and the often-encountered problems in rotorcraft designs. This comprehensive book presents, in depth, what engineers need to know about modelling rotorcraft aeromechanics. The focus is on analysis, and calculated results are presented to illustrate analysis characteristics and rotor behaviour. The first third of the book is an introduction to rotorcraft aerodynamics, blade motion, and performance. The remainder of the book covers advanced topics in rotary wing aerodynamics and dynamics.
Download or read book Aeroacoustics of Low Mach Number Flows written by Stewart Glegg and published by Academic Press. This book was released on 2017-02-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroacoustics of Low Mach Number Flows: Fundamentals, Analysis, and Measurement provides a comprehensive treatment of sound radiation from subsonic flow over moving surfaces, which is the most widespread cause of flow noise in engineering systems. This includes fan noise, rotor noise, wind turbine noise, boundary layer noise, and aircraft noise. Beginning with fluid dynamics, the fundamental equations of aeroacoustics are derived and the key methods of solution are explained, focusing both on the necessary mathematics and physics. Fundamentals of turbulence and turbulent flows, experimental methods and numerous applications are also covered. The book is an ideal source of information on aeroacoustics for researchers and graduate students in engineering, physics, or applied math, as well as for engineers working in this field. Supplementary material for this book is provided by the authors on the website www.aeroacoustics.net. The website provides educational content designed to help students and researchers in understanding some of the principles and applications of aeroacoustics, and includes example problems, data, sample codes, course plans and errata. The website is continuously being reviewed and added to. Explains the key theoretical tools of aeroacoustics, from Lighthill’s analogy to the Ffowcs Williams and Hawkings equation Provides detailed coverage of sound from lifting surfaces, boundary layers, rotating blades, ducted fans and more Presents the fundamentals of sound measurement and aeroacoustic wind tunnel testing
Download or read book Machinery Condition Monitoring written by Amiya Ranjan Mohanty and published by CRC Press. This book was released on 2014-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Find the Fault in the Machines Drawing on the author’s more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, and rotating machines in particular. A Single-Source Solution for Practice Machinery Conditioning Monitoring Since vibration is one of the most widely used fault detection techniques, the book offers an assessment of vibration analysis and rotor-dynamics. It also covers the techniques of wear and debris analysis, and motor current signature analysis to detect faults in rotating mechanical systems as well as thermography, the nondestructive test NDT techniques (ultrasonics and radiography), and additional methods. The author includes relevant case studies from his own experience spanning over the past 20 years, and detailing practical fault diagnosis exercises involving various industries ranging from steel and cement plants to gas turbine driven frigates. While mathematics is kept to a minimum, he also provides worked examples and MATLAB® codes. This book contains 15 chapters and provides topical information that includes: A brief overview of the maintenance techniques Fundamentals of machinery vibration and rotor dynamics Basics of signal processing and instrumentation, which are essential for monitoring the health of machines Requirements of vibration monitoring and noise monitoring Electrical machinery faults Thermography for condition monitoring Techniques of wear debris analysis and some of the nondestructive test (NDT) techniques for condition monitoring like ultrasonics and radiography Machine tool condition monitoring Engineering failure analysis Several case studies, mostly on failure analysis, from the author’s consulting experience Machinery Condition Monitoring: Principles and Practices presents the latest techniques in fault diagnosis and prognosis, provides many real-life practical examples, and empowers you to diagnose the faults in machines all on your own.
Download or read book Communicating Social Justice in Teacher Education written by Aubrey A. Huber and published by Routledge. This book was released on 2021-11-10 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evolving out of ethnographic fieldwork, this text examines how ideas of social justice are articulated and communicated by pre-service teachers and graduate teaching assistants in the US. By positing the concept of "help" as a central tenet of social justice within teacher education, this volume offers a unique performative analysis of how the concept is communicatively constituted in teacher education and training. Using a social justice framework, the book examines the ways in which new teachers contend with their identities as educators, and demonstrates how these communicative performances influence pre-service and new teachers’ perceptions of their role, as well as their responsibility to engage with social justice and critical approaches in the classroom. This text will benefit researchers, academics, and educators in higher education with an interest in teacher education, critical communication studies, and the sociology of education more broadly. Those specifically interested in teacher training, mentoring, and social justice in the classroom will also benefit from this book.
Download or read book Aeroacoustics of Flight Vehicles written by Harvey H. Hubbard and published by . This book was released on 1991 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Sound Environment written by Jian Kang and published by CRC Press. This book was released on 2006-09-27 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades there have been many major new developments in the field of urban sound environment. Jian Kang introduces and examines these key developments, including: the development of prediction methods for urban sound propagation establishment and application of noise-mapping software new noise control measures and design methods. Also covered is the new EU directive on noise and the substantial actions it has brought about across Europe. As the importance of soundscape, acoustic comfort and sound environment design have become widely recognized, Urban Sound Environments is a thoroughly useful book for students and practitioners in a wide range of fields, from urban planning and landscape through to architecture and acoustics.
Download or read book Proceedings of the ASME Noise Control and Acoustics Division written by American Society of Mechanical Engineers. Noise Control and Acoustics Division and published by . This book was released on 1997 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the subjects covered in 50-some papers from symposia at the November 1997 meeting: radiation and scattering of sound; measurement and signal processing of sound fields; vibroacoustic methods in processing and characterization of advanced materials and structures; powertrain noise; acoustics an
