Download or read book The Proceedings of the 5th International Conference on Energy Storage and Intelligent Vehicles ICEIV 2022 written by Fengchun Sun and published by Springer Nature. This book was released on 2023-05-10 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 5th International Conference on Energy Storage and Intelligent Vehicles (ICEIV 2022), held online, from December 3 to December 4, 2022. The topics covered include but are not limited to energy storage, power and energy systems, electrified/intelligent transportation, batteries and management, and power electronics. The papers share the latest findings in energy storage and intelligent vehicles, making the book a valuable asset for researchers, engineers, university students, etc.
Download or read book Vehicle Electrification in Modern Power Grids written by Vitor Monteiro and published by Elsevier. This book was released on 2024-07-13 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Electrification in Modern Power Grids: Disruptive Perspectives on Power Electronics Technology and Control Challenges collects the newest advances in technology for electric vehicle integration into one practical volume for professionals and advanced researchers. The book not only summarizes and clarifies legislation and grid codes for the area, but also outlines the modeling and analytical techniques needed, including predicting power converter reliability and its remaining useful life. Specializing in microgrid clusters, the book provides advanced power electronics device technology from wide-band-gap (WBG) to DSP-based digital control platforms and new materials for passive filters. Blending cutting-edge research and practical technology, this book provides a centralized resource for advanced researchers and engineers looking to accelerate vehicle electrification in the power grid. - Reveals new, disruptive power electronics and modeling technologies to enable EV integration into the grid - Collects guidance on mechanisms for digital control for EV charging and modes of operation, from V2G to G2H - Provides legislation and grid codes needed by engineers working on vehicle electrification in power grids
Download or read book Handbook of Research on Modeling Analysis and Control of Complex Systems written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2020-12-05 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current literature on dynamic systems is quite comprehensive, and system theory’s mathematical jargon can remain quite complicated. Thus, there is a need for a compendium of accessible research that involves the broad range of fields that dynamic systems can cover, including engineering, life sciences, and the environment, and which can connect researchers in these fields. The Handbook of Research on Modeling, Analysis, and Control of Complex Systems is a comprehensive reference book that describes the recent developments in a wide range of areas including the modeling, analysis, and control of dynamic systems, as well as explores related applications. The book acts as a forum for researchers seeking to understand the latest theory findings and software problem experiments. Covering topics that include chaotic maps, predictive modeling, random bit generation, and software bug prediction, this book is ideal for professionals, academicians, researchers, and students in the fields of electrical engineering, computer science, control engineering, robotics, power systems, and biomedical engineering.
Download or read book Industrial and Technological Applications of Power Electronics Systems written by Ryszard Strzelecki and published by MDPI. This book was released on 2021-09-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering.
Download or read book Applying Particle Swarm Optimization written by Burcu Adıgüzel Mercangöz and published by Springer Nature. This book was released on 2021-05-13 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the theoretical structure of particle swarm optimization (PSO) and focuses on the application of PSO to portfolio optimization problems. The general goal of portfolio optimization is to find a solution that provides the highest expected return at each level of portfolio risk. According to H. Markowitz’s portfolio selection theory, as new assets are added to an investment portfolio, the total risk of the portfolio’s decreases depending on the correlations of asset returns, while the expected return on the portfolio represents the weighted average of the expected returns for each asset. The book explains PSO in detail and demonstrates how to implement Markowitz’s portfolio optimization approach using PSO. In addition, it expands on the Markowitz model and seeks to improve the solution-finding process with the aid of various algorithms. In short, the book provides researchers, teachers, engineers, managers and practitioners with many tools they need to apply the PSO technique to portfolio optimization.
Download or read book Cognitive Computing Models in Communication Systems written by Budati Anil Kumar and published by John Wiley & Sons. This book was released on 2022-11-15 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: COGNITIVE COMPUTING MODELS IN COMMUNICATION SYSTEMS A concise book on the latest research focusing on problems and challenges in the areas of data transmission technology, computer algorithms, AI-based devices, computer technology, and their solutions. The book provides a comprehensive overview of state-of-the-art research work on cognitive models in communication systems and computing techniques. It also bridges the gap between various communication systems and solutions by providing the current models and computing techniques, their applications, the strengths and limitations of the existing methods, and the future directions in this area. The contributors showcase their latest research work focusing on the issues, challenges, and solutions in the field of data transmission techniques, computational algorithms, artificial intelligence (AI)-based devices, and computing techniques. Readers will find in this succinctly written and unique book: Topics covering the applications of advanced cognitive devices, models, architecture, and techniques. A range of case studies and applications that will provide readers with the tools to apply cutting-edge models and algorithms. In-depth information about new cognitive computing models and conceptual frameworks and their implementation. Audience The book is designed for researchers and electronics engineers, computer science engineers, industrial engineers, and mechanical engineers (both in academia and industry) working in the fields of machine learning, cognitive computing, mobile communication, and wireless network system.
Download or read book Artificial Intelligence for Robotics and Autonomous Systems Applications written by Ahmad Taher Azar and published by Springer Nature. This book was released on 2023-05-15 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses many applications of artificial intelligence in robotics, namely AI using visual and motional input. Robotic technology has made significant contributions to daily living, industrial uses, and medicinal applications. Machine learning, in particular, is critical for intelligent robots or unmanned/autonomous systems such as UAVs, UGVs, UUVs, cooperative robots, and so on. Humans are distinguished from animals by capacities such as receiving visual information, adjusting to uncertain circumstances, and making decisions to take action in a complex system. Significant progress has been made in robotics toward human-like intelligence; yet, there are still numerous unresolved issues. Deep learning, reinforcement learning, real-time learning, swarm intelligence, and other developing approaches such as tiny-ML have been developed in recent decades and used in robotics. Artificial intelligence is being integrated into robots in order to develop advanced robotics capable of performing multiple tasks and learning new things with a better perception of the environment, allowing robots to perform critical tasks with human-like vision to detect or recognize various objects. Intelligent robots have been successfully constructed using machine learning and deep learning AI technology. Robotics performance is improving as higher quality, and more precise machine learning processes are used to train computer vision models to recognize different things and carry out operations correctly with the desired outcome. We believe that the increasing demands and challenges offered by real-world robotic applications encourage academic research in both artificial intelligence and robotics. The goal of this book is to bring together scientists, specialists, and engineers from around the world to present and share their most recent research findings and new ideas on artificial intelligence in robotics.
Download or read book Innovations in Electronics and Communication Engineering written by H. S. Saini and published by Springer Nature. This book was released on 2022-03-12 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various streams of communication engineering like signal processing, VLSI design, embedded systems, wireless communications and electronics and communications in general. The book is a collection of best selected research papers presented at 9th International Conference on Innovations in Electronics and Communication Engineering at Guru Nanak Institutions Hyderabad, India. The book presents works from researchers, technocrats and experts about latest technologies in electronic and communication engineering. The authors have discussed the latest cutting edge technology, and the book will serve as a reference for young researchers.
Download or read book Smart Grids Renewable Energy Power Electronics Signal Processing and Communication Systems Applications written by Alfeu J. Sguarezi Filho and published by Springer Nature. This book was released on 2023-12-23 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses power electronics, signal processing and communication systems applications in smart grids (SG). Smart grids can be considered an evolution of the classic energy model to allow a more efficient management of the relationship between supply and demand, in order to overcome the contingency problems of the modern world. To achieve their goals, they use advanced technologies of information and communication, power electronics and signal processing, and can be used to integrate renewable energy sources. The book is divided into two main parts. The first part presents the application of power electronics technologies in renewable energy systems, while the second part presents some telecommunications, signal processing and energy capture technologies within the context of SGs. The chapters are written by invited expert authors, according to their research areas.
Download or read book Thermal and Electro thermal System Simulation 2020 written by Márta Rencz and published by MDPI. This book was released on 2021-01-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, edited by Prof. Marta Rencz and Prof Andras Poppe, Budapest University of Technology and Economics, and by Prof. Lorenzo Codecasa, Politecnico di Milano, collects fourteen papers carefully selected for the “thermal and electro-thermal system simulation” Special Issue of Energies. These contributions present the latest results in a currently very “hot” topic in electronics: the thermal and electro-thermal simulation of electronic components and systems. Several papers here proposed have turned out to be extended versions of papers presented at THERMINIC 2019, which was one of the 2019 stages of choice for presenting outstanding contributions on thermal and electro-thermal simulation of electronic systems. The papers proposed to the thermal community in this book deal with modeling and simulation of state-of-the-art applications which are highly critical from the thermal point of view, and around which there is great research activity in both industry and academia. In particular, contributions are proposed on the multi-physics simulation of families of electronic packages, multi-physics advanced modeling in power electronics, multiphysics modeling and simulation of LEDs, batteries and other micro and nano-structures.
Download or read book 2018 International Conference on Photovoltaic Science and Technologies PVCon written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Towards new e Infrastructure and e Services for Developing Countries written by Rafik Zitouni and published by Springer Nature. This book was released on 2021-03-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the 12th International Conference on e-Infrastructure and e-Services for Developing Countries, AFRICOMM 2020, held in Ebène City, Mauritius, in December 2020. Due to COVID-19 pandemic the conference was held virtually. The 20 full papers were carefully selected from 90 submissions. The papers are organized in four thematic sections on dynamic spectrum access and mesh networks; wireless sensing and 5G networks; software-defined networking; Internet of Things; e-services and big data; DNS resilience and performance.
Download or read book Technological Innovation for Applied AI Systems written by Luis M. Camarinha-Matos and published by Springer Nature. This book was released on 2021-06-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th IFIP WG 5.5/SOCOLNET Advanced Doctoral Conference on Computing, Electrical and Industrial Systems, DoCEIS 2021, held in Costa de Caparica, Portugal, in July 2021.* The 34 papers presented were carefully reviewed and selected from 92 submissions. The papers present selected results produced in engineering doctoral programs and focus on technological innovation for industry and service systems. Research results and ongoing work are presented, illustrated and discussed in the following areas: collaborative networks; smart manufacturing; cyber-physical systems and digital twins; intelligent decision making; smart energy management; communications and electronics; classification systems; smart healthcare systems; and medical devices. *The conference was held virtually. Chapters “Characteristics of Adaptable Control of Production Systems and the Role of Self-organization Towards Smart Manufacturing” and “Predictive Manufacturing: Enabling Technologies, Frameworks and Applications” are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Download or read book Grid to Vehicle G2V and Vehicle to Grid V2G Technologies written by Sekyung Han and published by MDPI. This book was released on 2021-03-16 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Grid-to-Vehicle (G2V) and Vehicle-to-Grid (V2G) Technologies” was in session from 1 May 2019 to 31 May 2020. For this Special issue, we invited articles on current state-of-the-art technologies and solutions in G2V and V2G, including but not limited to the operation and control of gridable vehicles, energy storage and management systems, charging infrastructure and chargers, EV demand and load forecasting, V2G interfaces and applications, V2G and energy reliability and security, environmental impacts, and economic benefits as well as demonstration projects and case studies in the aforementioned areas. Articles that deal with the latest hot topics in V2G are of particular interest, such as V2G and demand-side response control technique, smart charging infrastructure and grid planning, advanced power electronics for V2G systems, adaptation of V2G systems in the smart grid, adaptation of smart cities for a large number of EVs, integration, and the optimization of V2G systems, utilities and transportation assets for advanced V2G systems, wireless power transfer systems for advanced V2G systems, fault detection, maintenance and diagnostics in V2G processes, communications protocols for V2G systems, energy management system (EMS) in V2G systems, IoT for V2G systems, distributed energy and storage systems for V2G, transportation networks and V2G, energy management for V2G, smart charging/discharging stations for efficient V2G, environmental and socio-economic benefits and challenges of V2G systems, and building integrated V2G systems (BIV2G). Five manuscripts are published in this Special Issue, including “An Ensemble Stochastic Forecasting Framework for Variable Distributed Demand Loads” by Agyeman et al., “Where Will You Park? Predicting Vehicle Locations for Vehicle-to-Grid, An MPC Scheme with Enhanced Active Voltage Vector Region for V2G Inverter” by Shipman et al., “Electric Vehicles Energy Management with V2G/G2V Multifactor Optimization of Smart Grids” by Xia et al., and “A Review on Communication Standards and Charging Topologies of V2G and V2H Operation Strategies” by Savitti et al.
Download or read book Geometric Algebra Applications Vol I written by Eduardo Bayro-Corrochano and published by Springer. This book was released on 2018-06-20 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the Volume I Geometric Algebra for Computer Vision, Graphics and Neural Computing is to present a unified mathematical treatment of diverse problems in the general domain of artificial intelligence and associated fields using Clifford, or geometric, algebra. Geometric algebra provides a rich and general mathematical framework for Geometric Cybernetics in order to develop solutions, concepts and computer algorithms without losing geometric insight of the problem in question. Current mathematical subjects can be treated in an unified manner without abandoning the mathematical system of geometric algebra for instance: multilinear algebra, projective and affine geometry, calculus on manifolds, Riemann geometry, the representation of Lie algebras and Lie groups using bivector algebras and conformal geometry. By treating a wide spectrum of problems in a common language, this Volume I offers both new insights and new solutions that should be useful to scientists, and engineers working in different areas related with the development and building of intelligent machines. Each chapter is written in accessible terms accompanied by numerous examples, figures and a complementary appendix on Clifford algebras, all to clarify the theory and the crucial aspects of the application of geometric algebra to problems in graphics engineering, image processing, pattern recognition, computer vision, machine learning, neural computing and cognitive systems.
Download or read book Advances in Decision Sciences Image Processing Security and Computer Vision written by Suresh Chandra Satapathy and published by Springer. This book was released on 2019-07-12 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Emerging Trends in Engineering (ICETE), held at University College of Engineering and organised by the Alumni Association, University College of Engineering, Osmania University, in Hyderabad, India on 22–23 March 2019. The proceedings of the ICETE are published in three volumes, covering seven areas: Biomedical, Civil, Computer Science, Electrical & Electronics, Electronics & Communication, Mechanical, and Mining Engineering. The 215 peer-reviewed papers from around the globe present the latest state-of-the-art research, and are useful to postgraduate students, researchers, academics and industry engineers working in the respective fields. Volume 1 presents papers on the theme “Advances in Decision Sciences, Image Processing, Security and Computer Vision – International Conference on Emerging Trends in Engineering (ICETE)”. It includes state-of-the-art technical contributions in the area of biomedical and computer science engineering, discussing sustainable developments in the field, such as instrumentation and innovation, signal and image processing, Internet of Things, cryptography and network security, data mining and machine learning.
