Download or read book Proceedings 16th IEEE International Conference on High Performance Computing and Communications HPCC 2014 written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third International Scientific Conference Intelligent Information Technologies for Industry IITI 18 written by Ajith Abraham and published by Springer. This book was released on 2018-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented in the main track of IITI 2018, the Third International Scientific Conference on Intelligent Information Technologies for Industry held in Sochi, Russia on September 17–21. The conference was jointly co-organized by Rostov State Transport University (Russia) and VŠB – Technical University of Ostrava (Czech Republic) with the participation of Russian Association for Artificial Intelligence (RAAI). IITI 2018 was devoted to practical models and industrial applications related to intelligent information systems. It was considered as a meeting point for researchers and practitioners to enable the implementation of advanced information technologies into various industries. Nevertheless, some theoretical talks concerning the state-of-the-art in intelligent systems and soft computing were also included into proceedings.
Download or read book Euro Par 2015 Parallel Processing written by Jesper Larsson Träff and published by Springer. This book was released on 2015-07-24 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Conference on Parallel and Distributed Computing, Euro-Par 2015, held in Vienna, Austria, in August 2015. The 51 revised full papers presented together with 2 invited papers were carefully reviewed and selected from 190 submissions. The papers are organized in the following topical sections: support tools and environments; performance modeling, prediction and evaluation; scheduling and load balancing; architecture and compilers; parallel and distributed data management; grid, cluster and cloud computing; distributed systems and algorithms; parallel and distributed programming, interfaces and languages; multi- and many-core programming; theory and algorithms for parallel computation; numerical methods and applications; and accelerator computing.
Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Information Technologies for Rail Transportation EITRT 2021 written by Jianying Liang and published by Springer Nature. This book was released on 2022-02-18 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest research trends, methods, and experimental results in the field of electrical and information technologies for rail transportation, which covers abundant state-of-the-art research theories and ideas. As a vital field of research that is highly relevant to current developments in a number of technological domains, the subjects it covered include intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academicians, and industrial professionals to present the most innovative research and development in the field of rail transportation electrical and information technologies. Engineers and researchers in academia, industry, and government will also explore an insightful view of the solutions that combine ideas from multiple disciplines in this field. The volumes serve as an excellent reference work for researchers and graduate students working on rail transportation and electrical and information technologies.
Download or read book Membrane Computing written by Grzegorz Rozenberg and published by Springer. This book was released on 2015-12-29 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the International Conference on Membrane Computing, CMC 2015, held in Valencia, Spain, in August 2015. The 22 full papers presented in this volume were carefully reviewed and selected from 34 submissions. The volume also contains 3 invited talks in full-paper length.
Download or read book Euro Par 2014 Parallel Processing written by Fernando Silva and published by Springer. This book was released on 2014-08-11 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Parallel and Distributed Computing, Euro-Par 2014, held in Porto, Portugal, in August 2014. The 68 revised full papers presented were carefully reviewed and selected from 267 submissions. The papers are organized in 15 topical sections: support tools environments; performance prediction and evaluation; scheduling and load balancing; high-performance architectures and compilers; parallel and distributed data management; grid, cluster and cloud computing; green high performance computing; distributed systems and algorithms; parallel and distributed programming; parallel numerical algorithms; multicore and manycore programming; theory and algorithms for parallel computation; high performance networks and communication; high performance and scientific applications; and GPU and accelerator computing.
Download or read book Euro Par 2018 Parallel Processing written by Marco Aldinucci and published by Springer. This book was released on 2018-08-20 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 24th International Conference on Parallel and Distributed Computing, Euro-Par 2018, held in Turin, Italy, in August 2018. The 57 full papers presented in this volume were carefully reviewed and selected from 194 submissions. They were organized in topical sections named: support tools and environments; performance and power modeling, prediction and evaluation; scheduling and load balancing; high performance architecutres and compilers; parallel and distributed data management and analytics; cluster and cloud computing; distributed systems and algorithms; parallel and distributed programming, interfaces, and languages; multicore and manycore methods and tools; theory and algorithms for parallel computation and networking; parallel numerical methods and applications; and accelerator computing for advanced applications.
Download or read book Membrane Computing written by Alberto Leporati and published by Springer. This book was released on 2017-02-21 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains revised selected papers from the 17th International Conference on Membrane Computing, CMC 2017, held in Milan, Italy, in July 2016. The 19 full papers presented in this volume were carefully reviewed and selected from 28 submissions. They deal with membrane computing (P systems theory), an area of copmputer science aiming to abstract computing ideas and models from the structure and the functioning of living cells, as well as from the way the cells are organized in tissues or higher order structures. The volume also contains 3 invited talks in full-paper length.
Download or read book Proceedings of International Conference on Information Technology and Applications written by Abrar Ullah and published by Springer Nature. This book was released on 2022-04-21 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality papers presented at 15th International Conference on Information Technology and Applications (ICITA 2021), held in Dubai, UAE during 13 – 14 November 2021. The book presents original research work of academics and industry professionals to exchange their knowledge of the state-of-the-art research and development in information technology and applications. The topics covered in the book are cloud computing, business process engineering, machine learning, evolutionary computing, big data analytics, internet of things and cyber-physical systems, information and knowledge management, computer vision and image processing, computer graphics and games programming, mobile computing, ontology engineering, software and systems modelling, human computer interaction, online learning / e-learning, computer networks, and web engineering.
Download or read book Smart Systems Design Applications and Challenges written by Rodrigues, João M.F. and published by IGI Global. This book was released on 2020-02-28 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart systems when connected to artificial intelligence (AI) are still closely associated with some popular misconceptions that cause the general public to either have unrealistic fears about AI or to expect too much about how it will change our workplace and life in general. It is important to show that such fears are unfounded, and that new trends, technologies, and smart systems will be able to improve the way we live, benefiting society without replacing humans in their core activities. Smart Systems Design, Applications, and Challenges provides emerging research that presents state-of-the-art technologies and available systems in the domains of smart systems and AI and explains solutions from an augmented intelligence perspective, showing that these technologies can be used to benefit, instead of replace, humans by augmenting the information and actions of their daily lives. The book addresses all smart systems that incorporate functions of sensing, actuation, and control in order to describe and analyze a situation and make decisions based on the available data in a predictive or adaptive manner. Highlighting a broad range of topics such as business intelligence, cloud computing, and autonomous vehicles, this book is ideally designed for engineers, investigators, IT professionals, researchers, developers, data analysts, professors, and students.
Download or read book Parallel Computing On the Road to Exascale written by G.R. Joubert and published by IOS Press. This book was released on 2016-04-28 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: As predicted by Gordon E. Moore in 1965, the performance of computer processors increased at an exponential rate. Nevertheless, the increases in computing speeds of single processor machines were eventually curtailed by physical constraints. This led to the development of parallel computing, and whilst progress has been made in this field, the complexities of parallel algorithm design, the deficiencies of the available software development tools and the complexity of scheduling tasks over thousands and even millions of processing nodes represent a major challenge to the construction and use of more powerful parallel systems. This book presents the proceedings of the biennial International Conference on Parallel Computing (ParCo2015), held in Edinburgh, Scotland, in September 2015. Topics covered include computer architecture and performance, programming models and methods, as well as applications. The book also includes two invited talks and a number of mini-symposia. Exascale computing holds enormous promise in terms of increasing scientific knowledge acquisition and thus contributing to the future well-being and prosperity of mankind. A number of innovative approaches to the development and use of future high-performance and high-throughput systems are to be found in this book, which will be of interest to all those whose work involves the handling and processing of large amounts of data.
Download or read book Proceedings of International Conference on Intelligent Computing Information and Control Systems written by A. Pasumpon Pandian and published by Springer Nature. This book was released on 2021-01-24 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the International Conference on Intelligent Computing, Information and Control Systems (ICICCS 2020). It encompasses various research works that help to develop and advance the next-generation intelligent computing and control systems. The book integrates the computational intelligence and intelligent control systems to provide a powerful methodology for a wide range of data analytics issues in industries and societal applications. The book also presents the new algorithms and methodologies for promoting advances in common intelligent computing and control methodologies including evolutionary computation, artificial life, virtual infrastructures, fuzzy logic, artificial immune systems, neural networks and various neuro-hybrid methodologies. This book is pragmatic for researchers, academicians and students dealing with mathematically intransigent problems.
Download or read book Proceedings of the ICR 22 International Conference on Innovations in Computing Research written by Kevin Daimi and published by Springer Nature. This book was released on 2022-08-10 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Proceedings of the ICR ́22 International Conference on Innovations in Computing Research, provides an essential compilation of relevant and cutting-edge academic and industry work on key computer and network security, smart cities, smart energy, IoT, health informatics, biomedical imaging, data science and computer science and engineering education topics. It offers an excellent professional development resource for educators and practitioners on the state-of-the-art in these areas and contributes towards the enhancement of the community outreach and engagement component of the above-mentioned areas. Various techniques, methods, and approaches adopted by experts in these fields are introduced. This book provides detailed explanation of the concepts that are pertinently reinforced by practical examples, and a road map of future trends that are suitable for innovative computing research. It is written by professors, researchers, and industry professionals with long experience in these fields to furnish a rich collection of manuscripts in highly regarded topics that have not been creatively compiled together before. This book can be a valuable resource to university faculty, students to enhance their research work and as a supplement to their courses in these fields, researchers, and industry professionals. Furthermore, it is a valuable tool to experts in these areas to contribute towards their professional development efforts.
Download or read book Advances in Edge Computing Massive Parallel Processing and Applications written by F. Xhafa and published by IOS Press. This book was released on 2020-03-10 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid advance of Internet of Things (IoT) technologies has resulted in the number of IoT-connected devices growing exponentially, with billions of connected devices worldwide. While this development brings with it great opportunities for many fields of science, engineering, business and everyday life, it also presents challenges such as an architectural bottleneck – with a very large number of IoT devices connected to a rather small number of servers in Cloud data centers – and the problem of data deluge. Edge computing aims to alleviate the computational burden of the IoT for the Cloud by pushing some of the computations and logics of processing from the Cloud to the Edge of the Internet. It is becoming commonplace to allocate tasks and applications such as data filtering, classification, semantic enrichment and data aggregation to this layer, but to prevent this new layer from itself becoming another bottleneck for the whole computing stack from IoT to the Cloud, the Edge computing layer needs to be capable of implementing massively parallel and distributed algorithms efficiently. This book, Advances in Edge Computing: Massive Parallel Processing and Applications, addresses these challenges in 11 chapters. Subjects covered include: Fog storage software architecture; IoT-based crowdsourcing; the industrial Internet of Things; privacy issues; smart home management in the Cloud and the Fog; and a cloud robotic solution to assist medical applications. Providing an overview of developments in the field, the book will be of interest to all those working with the Internet of Things and Edge computing.
Download or read book Parallel Computing Accelerating Computational Science and Engineering CSE written by M. Bader and published by IOS Press. This book was released on 2014-03-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: Parallel computing has been the enabling technology of high-end machines for many years. Now, it has finally become the ubiquitous key to the efficient use of any kind of multi-processor computer architecture, from smart phones, tablets, embedded systems and cloud computing up to exascale computers. _x000D_ This book presents the proceedings of ParCo2013 – the latest edition of the biennial International Conference on Parallel Computing – held from 10 to 13 September 2013, in Garching, Germany. The conference focused on several key parallel computing areas. Themes included parallel programming models for multi- and manycore CPUs, GPUs, FPGAs and heterogeneous platforms, the performance engineering processes that must be adapted to efficiently use these new and innovative platforms, novel numerical algorithms and approaches to large-scale simulations of problems in science and engineering._x000D_ The conference programme also included twelve mini-symposia (including an industry session and a special PhD Symposium), which comprehensively represented and intensified the discussion of current hot topics in high performance and parallel computing. These special sessions covered large-scale supercomputing, novel challenges arising from parallel architectures (multi-/manycore, heterogeneous platforms, FPGAs), multi-level algorithms as well as multi-scale, multi-physics and multi-dimensional problems._x000D_ It is clear that parallel computing – including the processing of large data sets (“Big Data”) – will remain a persistent driver of research in all fields of innovative computing, which makes this book relevant to all those with an interest in this field.
Download or read book Advances in Computers written by Ali R. Hurson and published by Academic Press. This book was released on 2021-06-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computers, Volume 123 presents innovations in computer hardware, software, theory, design and applications, with this updated volume including new chapters on Downlink Resource Allocations of Satellite-Airborne-Terrestrial Networks Integration, Evaluating Software Testing Techniques: A Systematic Mapping Study, The Screening Phase in Systematic Reviews: Can we speed up the process?, A Survey on Cloud-Based Video Streaming Services, and User Behavior-Ensemble Learning based Improving QoE Fairness in HTTP Adaptive Streaming over SDN approach. Contains novel subject matter that is relevant to computer science Includes the expertise of contributing authors Presents an easy to comprehend writing style
Download or read book Software for Exascale Computing SPPEXA 2013 2015 written by Hans-Joachim Bungartz and published by Springer. This book was released on 2016-09-14 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research and its outcomes presented in this collection focus on various aspects of high-performance computing (HPC) software and its development which is confronted with various challenges as today's supercomputer technology heads towards exascale computing. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The collection thereby highlights pioneering research findings as well as innovative concepts in exascale software development that have been conducted under the umbrella of the priority programme "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) and that have been presented at the SPPEXA Symposium, Jan 25-27 2016, in Munich. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest.
