Download or read book Procedure for Tooth Contact Analysis of a Face Gear Meshing with a Spur Gear Using Finite Element Analysis written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-16 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: A procedure was developed to perform tooth contact analysis between a face gear meshing with a spur pinion using finite element analysis. The face gear surface points from a previous analysis were used to create a connected tooth solid model without gaps or overlaps. The face gear surface points were used to create a five tooth face gear Patran model (with rim) using Patran PCL commands. These commands were saved in a series of session files suitable for Patran input. A four tooth spur gear that meshes with the face gear was designed and constructed with Patran PCL commands. These commands were also saved in a session files suitable for Patran input. The orientation of the spur gear required for meshing with the face gear was determined. The required rotations and translations are described and built into the session file for the spur gear. The Abaqus commands for three-dimensional meshing were determined and verified for a simplified model containing one spur tooth and one face gear tooth. The boundary conditions, loads, and weak spring constraints were determined to make the simplified model work. The load steps and load increments to establish contact and obtain a realistic load was determined for the simplified two tooth model. Contact patterns give some insight into required mesh density. Building the two gears in two different local coordinate systems and rotating the local coordinate systems was verified as an easy way to roll the gearset through mesh. Due to limitation of swap space, disk space and time constraints of the summer period, the larger model was not completed.Bibel, George and Lewicki, David G. (Technical Monitor)Glenn Research CenterROTATION; GEAR TEETH; BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; TIME; COMPUTER PROGRAMS; LOADS (FORCES)

Download or read book Contact Stresses in Meshing Spur Gear Teeth Use of an Incremental Finite Element Procedure written by and published by . This book was released on 1992 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Mechanics of Mechanical Watches and Clocks written by Ruxu Du and published by Springer Science & Business Media. This book was released on 2012-09-21 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Mechanics of Mechanical Watches and Clocks" presents historical views and mathematical models of mechanical watches and clocks. Although now over six hundred years old, mechanical watches and clocks are still popular luxury items that fascinate many people around the world. However few have examined the theory of how they work as presented in this book. The illustrations and computer animations are unique and have never been published before. It will be of significant interest to researchers in mechanical engineering, watchmakers and clockmakers, as well as people who have an engineering background and are interested in mechanical watches and clocks. It will also inspire people in other fields of science and technology, such as mechanical engineering and electronics engineering, to advance their designs. Professor Ruxu Du works at the Chinese University of Hong Kong, China. Assistant Professor Longhan Xie works at the South China University of Technology, China.

Download or read book Design Generation and Tooth Contact Analysis TCA of Asymmetric Face Gear Drive With Modified Geometry written by and published by . This book was released on 2001 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new type of face gear drive for application in transmissions, particularly in helicopters, has been developed. The new geometty differs from the existing geometry by application of asymmetric profiles and double-crowned pinion of the face gear mesh. The paper describes the computerized design, simulation of meshing and contact, and stress analysis by finite element method. Special purpose computer codes have been developed to conduct the analysis. The analysis of this new type of face gear is illustrated with a numerical example.

Download or read book New Approaches to Gear Design and Production written by Veniamin Goldfarb and published by Springer Nature. This book was released on 2020-01-25 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third book in a series devoted to gear design and production. Comprising papers by scientists and gear experts from around the globe, it covers recent developments in practically all spheres of mechanical engineering related to gears and transmissions. It describes advanced approaches to research, design, testing and production of various kinds of gears for a vast range of applications, with a particular focuses on advanced computer-aided approaches for gear analysis, simulation and design, the application of new materials and tribological issues.

Download or read book Industrial Tribology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2022-11-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering energy-saving technologies and how these are incorporated into component design, this book is relevant to many industries, including automotive engineering, and discusses the topical issue of sustainability in industry. This book details recent fundamental developments in the field of tribology in industrial systems. Tribology has advanced significantly in recent years. Tribological performance depends on external parameters such as contact pressure at the interface, system temperature, relative speed between bodies and contact behaviour. Through ensuring that mechanisms work in an energy-efficient manner and minimizing wear, engineers should seek to implement the study of tribology to improve the life of machinery within industry. Essential to the study of component design and condition monitoring, the book touches upon topics such as gears, bearings and clutches. Additionally, it discusses tribology’s relation to Industry 4.0 and incorporates the results from cutting-edge research. Industrial Tribology: Sustainable Machinery and Industry 4.0 will be of interest to all engineers working in industry and involved in mechanical engineering, material engineering, mechanisms and component design and automotive engineering.

Download or read book Proceedings Of 17th All India Manufacturing Technology written by and published by Allied Publishers. This book was released on with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book International Gear Conference 2014 26th 28th August 2014 Lyon written by Philippe Velex and published by Chandos Publishing. This book was released on 2014-09-18 with total page 1225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Gear Conference 2014, held in Lyon, 26th-28th August 2014. Mechanical transmission components such as gears, rolling element bearings, CVTs, belts and chains are present in every industrial sector and over recent years, increasing competitive pressure and environmental concerns have provided an impetus for cleaner, more efficient and quieter units. Moreover, the emergence of relatively new applications such as wind turbines, hybrid transmissions and jet engines has led to even more severe constraints. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and range of applications (aerospace, automotive, wind turbine, and others) including topical issues such as power losses and efficiency, gear vibrations and noise, lubrication, contact failures, tribo-dynamics and nano transmissions. - A truly international contribution with more than 120 papers from all over the world - A judicious balance between fundamental research and industrial concerns - Participation of the most respected international experts in the field of gearing - A wide range of applications in terms of size, power, speed, and industrial sector

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded, edition covers the theory, design, geometry and manufacture of all types of gears and gear drives. This is an invaluable reference for designers, theoreticians, students, and manufacturers. This edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: 1. New geometry for modified spur and helical gears, face-gear drives, and cycloidal pumps. 2. New design approaches for one stage planetary gear trains and spiral bevel gear drives. 3. An enhanced approach for stress analysis of gear drives with FEM. 4. New methods of grinding face gear drives, generating double crowned pinions, and improved helical gear shaving. 5. Broad application of simulation of meshing and TCA. 6. New theories on the simulation of meshing for multi-body systems, detection of cases wherein the contact line on generating surfaces may have its own envelope, and detection and avoidance of singularities of generated surfaces.

Download or read book Power Transmissions written by George Dobre and published by Springer Science & Business Media. This book was released on 2013-07-11 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: This books contains the Proceedings of the 4th International Conference on Power Transmissions, that was held in Sinaia, Romania from June 20 -23, 2012. Power Transmissions is a very complex and multi-disciplinary scientific field of Mechanical Engineering that covers the different types of transmissions (mechanical, hydraulic, pneumatic) as well as all the machine elements involved, such as gears, bearings, shafts, couplings and a lot more. It concerns not only their basic theory but also their design, analysis, testing, application and maintenance. The requirements set to modern power transmissions are really tough to meet: They need to be more efficient, stronger, smaller, noiseless, easier to produce and to cost less. There is a strong demand to become easier in operation and maintenance, or even automatic and in maintenance-free. Last but not least, they should be easily recycled and respect the environment. Joint efforts of specialists from both academia and industry can significantly contribute to fulfill these needs. The main goal of this conference was to bring together experts from all over the world and present the latest developments in the field of Power Transmissions.

Download or read book Advanced Computing and Intelligent Technologies written by Rabindra Nath Shaw and published by Springer Nature. This book was released on with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control and Nonlinear Dynamics on Energy Conversion Systems written by Herbert Ho-Ching Iu and published by MDPI. This book was released on 2019-07-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers. This research has demonstrated that these systems can become unstable with a direct result in increased losses, extra subharmonics, and even uncontrollability/unobservability. The detailed study of these systems can help in the design of smaller, lighter, and less expensive converters that are particularly important in emerging areas of research like electric vehicles, smart grids, renewable energy sources, and others. The aim of this Special Issue is to cover control and nonlinear aspects of instabilities in different energy conversion systems: theoretical, analysis modelling, and practical solutions for such emerging applications. In this Special Issue, we present novel research works in different areas of the control and nonlinear dynamics of energy conversion systems.

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 1081 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Face gear Drives Design Analysis and Testing for Helicopter Transmission Applications written by and published by . This book was released on 1992 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gear Geometry and Applied Theory written by Faydor L. Litvin and published by Cambridge University Press. This book was released on 2004-09-06 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised, expanded edition covers the theory, design, geometry, and manufacture of all types of gears and gear drives. An invaluable reference for designers, theoreticians, students, and manufacturers, the second edition includes advances in gear theory, gear manufacturing, and computer simulation. Among the new topics are: new geometry for gears and pumps; new design approaches for planetary gear trains and bevel gear drives; an enhanced approach for stress analysis; new methods of grinding and gear shaving; and new theory on the simulation and its application. First Edition published by Pearson Education Hb (1994): 0-132-11095-4

Download or read book Tribology in Materials and Applications written by Jitendra Kumar Katiyar and published by Springer Nature. This book was released on 2020-05-23 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book broadens the knowledge of tribology. This book is evolved out of current research trends on tribological performance of systems related to nano tribology, rheology, engines, polymer brushes, composite materials, erosive wear and lubrication. The book deals with enhancing the ideas on tribological properties, the different types of wear phenomenon and lubrication enhancement. Further, the tribological performance of systems, whether nano, micro or macro-scale, depends upon a large number of external parameters and important among them are temperature, contact pressure and relative speed. Thus, the book focus on the theoretical aspects to industrial applications of tribology.