Download or read book Problemi di Fisica Generale Meccanica e Termodinamica written by Antonio Bertin and published by Società Editrice Esculapio. This book was released on 2020-06-01 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Questa raccolta comprende prove scritte d'esame di Fisica Generale assegnate agli studenti di diversi Corsi di Laurea della Facoltà di Ingegneria dell'Università di Bologna negli ultimi anni accademici, su temi classici di Meccanica e Termodinamica. I problemi vengono qui presentati in una prima campionatura, rispondendo all'esigenza, più volte manifestata dagli studenti stessi, di disporre di basi concrete
Download or read book Atlas of capillaroscopy in rheumatic diseases written by Maurizio Cutolo and published by Elsevier srl. This book was released on 2015-09-30T00:00:00+02:00 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primary Raynaud phenomenon, as clinical symptom of altered peripheral microcirculation, affects 5ˆ15% of individuals in the general population and almost 15% of cases will shift from the primary to the secondary phenomenon (associated with the systemic sclerosis and other connective tissue diseases) in a mean time of 29.4±10 months. Nailfold videocapillaroscopy (NVC) represents the safest, noninvasive, less expensive and reliable method to analyze microvascular abnormalities in systemic sclerosis and the findings can be scored and quantified. Since microvascular damage and dysfunction represent early markers of systemic sclerosis and are clinically mirrored by secondary Raynaud phenomenon, the diagnostic, prognostic and therapeutic implications of microvessel morphological analysis by NVC enables the best clinical management. Reduced capillary density on NVC predict and correlates with a high risk of developing digital skin ulcers and the presence of pulmonary arterial hypertension, and can therefore be used as a marker of systemic sclerosis severity and progression, as well as to monitorize the therapeutical effects. Growing interest and intense recent research on capillaroscopy have resulted up to 2010 in almost 350 papers reported in PubMed in the last 10 years, accounting for almost 50% of the total number of publications on the subject from 1951. However, an atlas explaining the capillaroscopy in rheumatic diseases in a modern, updated and physiologically-based way with large discussion of clinical cases was lacking and is now available. The authors of the atlas have been selected among the best international experts of the field and are all members of the board of the international courses on capillaroscopy supported by the European Ligue Against Rheumatic Diseases (EULAR). The reader after a carefull and progressive analysis of the text will learn to understand the capillaroscopic findings that characterize the most important rheumatic diseases and will use the atlas for his daily clinical practice.
Download or read book Problemi di fisica Raccolta di prove d esame di meccanica e termodinamica written by Vincenzo Augelli and published by . This book was released on 2014 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanotechnology Principles and Practices written by Sulabha K. Kulkarni and published by Springer. This book was released on 2014-11-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given the rapid advances in the field, this book offers an up-to-date introduction to nanomaterials and nanotechnology. Though condensed into a relatively small volume, it spans the whole range of multidisciplinary topics related to nanotechnology. Starting with the basic concepts of quantum mechanics and solid state physics, it presents both physical and chemical synthetic methods, as well as analytical techniques for studying nanostructures. The size-specific properties of nanomaterials, such as their thermal, mechanical, optical and magnetic characteristics, are discussed in detail. The book goes on to illustrate the various applications of nanomaterials in electronics, optoelectronics, cosmetics, energy, textiles and the medical field and discusses the environmental impact of these technologies. Many new areas, materials and effects are then introduced, including spintronics, soft lithography, metamaterials, the lotus effect, the Gecko effect and graphene. The book also explains the functional principles of essential techniques, such as scanning tunneling microscopy (STM), atomic force microscopy (AFM), scanning near field optical microscopy (SNOM), Raman spectroscopy and photoelectron microscopy. In closing, Chapter 14, ‘Practicals’, provides a helpful guide to setting up and conducting inexpensive nanotechnology experiments in teaching laboratories.
Download or read book Radiocarbon and Archaeology written by Thomas Higham and published by . This book was released on 2004 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiocarbon dating covers the most recent span of geo-archaeological time, back to c.55,000 years BP. The list of applications and disciplines it can be used for is wide-ranging and burgeoning. It is used widely in dating aspects of the Earth's environmental, oceanographic and atmospheric systems. It is used as a tracer in investigating residence times of carbon in soils, rivers, oceans and lakes, and to document the movements of oceanic water and its circulation and exchange with the atmosphere. It is also used in aerosol science, and is crucial to studies of Earth's changing climate. This wide relevance of the 14C isotope means that one must be something of a polymath to understand, and it was for this reason that in 1981 the first '14C and Archaeology' Symposium was held. Its aim: to provide a wider forum for studies of prehistoric chronology than would normally be allowed at the Radiocarbon conferences. The 4th Symposium was held in Oxford in April 2002, and the proceedings that follow comprise thirty-one papers, covering archaeological dating research from the Altai to Antarctica, and from the Palaeolithic to the Medieval.
Download or read book Quantum Mechanics for Nanostructures written by Vladimir Vasilʹevich Mitin and published by Cambridge University Press. This book was released on 2010-05-20 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textbook introducing engineers to quantum mechanics and nanostructures, covering the fundamentals and applications to nanoscale materials and nanodevices.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Fisica Generale Problemi di Meccanica e Termodinamica written by Mauro Nisoli and published by Società Editrice Esculapio. This book was released on 2019-04-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Questo volume contiene una raccolta aggiornata di problemi svolti ed ampiamente commentati su argomenti selezionati di Fisica Generale (Meccanica, Termodinamica). Il volume nasce dall’esperienza didattica decennale maturata dagli autori nell’insegnamento dei corsi di Fisica presso le Facoltà di Ingegneria del Politecnico di Milano. Lo scopo di questa raccolta di problemi è di fornire agli studenti delle Facoltà di Ingegneria e Scienze un valido supporto didattico allo studio della Fisica Generale nell’ambito di un corso di base. I problemi sono raggruppati nelle seguenti aree tematiche: calcolo vettoriale; cinematica e dinamica del punto materiale; lavoro ed energia; dinamica dei sistemi di particelle; gravitazione universale; meccanica del corpo rigido; meccanica dei fluidi; termometria, calorimetria, primo e secondo principio della termodinamica; teoria cinetica dei gas. Vengono inoltre proposti temi riepilogativi concepiti per aiutare lo studente nella preparazione dell’esame. Nella stessa collana sono disponibili: Problemi di Meccanica, Termodinamica, Elettricità e Magnetismo; Problemi di Elettromagnetismo e Ottica.
Download or read book Physical Metallurgy Principles written by Robert E. Reed-Hill and published by Van Nostrand Reinhold Company. This book was released on 1973 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers all aspects of physical metallurgy and behavior of metals and alloys. * Presents the principles on which metallurgy is based. * Concepts such as heat affected zone and structure-property relationships are covered. * Principles of casting are clearly outlined in the chapter on solidification. * Advanced treatment on physical metallurgy provides specialized information on metals.
Download or read book Nanofabrication written by Zheng Cui and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with the most up-to-date information and development in the Nanofabrication area. It presents a one-stop description at the introduction level on most of the technologies that have been developed which are capable of making structures below 100nm. Principles of each technology are introduced and illustrated with minimum mathematics involved. The book serves as a practical guide and first hand reference for those working in nanostructure fabrication.
Download or read book Problemi di Fisica Generale Meccanica e Termodinamica written by Pierluigi Zotto and published by Società Editrice Esculapio. This book was released on 2022-11-10 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: La presente raccolta propone una parte significativa dei temi d’esame assegnati negli anni scorsi ai corsi di Fisica 1 di Ingegneria del settore Informazione dell’Università di Padova da parte degli autori. I problemi sono stati accuratamente selezionati e riorganizzati per argomenti corredandoli con soluzioni commentate con lo scopo di fornire agli studenti uno strumento avanzato di preparazione della prova scritta. Ogni argomento viene introdotto gradualmente, ma è comunque richiesta, per la soluzione, una conoscenza teorica della materia sufficiente a permettere di interpretare correttamente le situazioni proposte. I problemi presentati sono articolati e costituiscono l’ideale complemento agli esercizi trattati dal docente durante lo svolgimento dei corsi oppure incontrati come esempi o semplici esercizi da risolvere nei libri di testo.
Download or read book Mathematical Models for Elastic Structures written by Piero Villaggio and published by Cambridge University Press. This book was released on 1997-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the seventeenth century, several useful theories of elastic structures emerged, with applications to civil and mechanical engineering problems. Recent and improved mathematical tools have extended applications into new areas such as mathematical physics, geomechanics, and biomechanics. This book offers a critically filtered collection of the most significant theories dealing with elastic slender bodies. It includes mathematical models involving elastic structures that are used to solve practical problems with particular emphasis on nonlinear problems.
Download or read book The Mathematics Teacher in the Digital Era written by Alison Clark-Wilson and published by Springer Science & Business Media. This book was released on 2013-12-08 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the key issue of the initial education and lifelong professional learning of teachers of mathematics to enable them to realize the affordances of educational technology for mathematics. With invited contributions from leading scholars in the field, this volume contains a blend of research articles and descriptive texts. In the opening chapter John Mason invites the reader to engage in a number of mathematics tasks that highlight important features of technology-mediated mathematical activity. This is followed by three main sections: An overview of current practices in teachers’ use of digital technologies in the classroom and explorations of the possibilities for developing more effective practices drawing on a range of research perspectives (including grounded theory, enactivism and Valsiner’s zone theory). A set of chapters that share many common constructs (such as instrumental orchestration, instrumental distance and double instrumental genesis) and research settings that have emerged from the French research community, but have also been taken up by other colleagues. Meta-level considerations of research in the domain by contrasting different approaches and proposing connecting or uniting elements
Download or read book Nanochemistry written by Geoffrey A Ozin and published by Royal Society of Chemistry. This book was released on 2023-01-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the science. Nanochemistry: A Chemical Approach to Nanomaterials is the first textbook for teaching nanochemistry and adopts an interdisciplinary and comprehensive approach to the subject. It presents a basic chemical strategy for making nanomaterials and describes some of the principles of materials self-assembly over 'all' scales. It demonstrates how nanometre and micrometre scale building blocks (with a wide range of shapes, compositions and surface functionalities) can be coerced through chemistry to organize spontaneously into unprecedented structures, which can serve as tailored functional materials. Suggestions of new ways to tackle research problems and speculations on how to think about assembling the future of nanotechnology are given. Primarily designed for teaching, this book will appeal to graduate and advanced undergraduate students. It is well illustrated with graphical representations of the structure and form of nanomaterials and contains problem sets as well as other pedagogical features such as further reading, case studies and a comprehensive bibliography.
Download or read book Doubt And Certainty written by Tony Rothman and published by Basic Books (AZ). This book was released on 1998-10-29 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can we learn anything from parallels between physics and Eastern philosophy?
Download or read book Fabrication Engineering at the Micro and Nanoscale written by Stephen A. Campbell and published by OUP USA. This book was released on 2008-01-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for advanced undergraduate or first-year graduate courses in semiconductor or microelectronic fabrication, the third edition of Fabrication Engineering at the Micro and Nanoscale provides a thorough and accessible introduction to all fields of micro and nano fabrication.
Download or read book The Science of Human Origins written by Claudio Tuniz and published by Left Coast Press. This book was released on 2014-02-15 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of human origins has been revolutionized by new discoveries in the past two decades. In this book, three leading paleoanthropologists and physical scientists illuminate, in friendly, accessible language, the amazing findings behind the latest theories. They describe new scientific and technical tools for dating, DNA analysis, remote survey, and paleoenvironmental assessment that enabled recent breakthroughs in research. They also explain the early development of the modern human cortex, the evolution of symbolic language and complex tools, and our strange cousins from Flores and Denisova.
