Download or read book Probing Deviations from Traditional Colloid Filtration Theory by Atomic Force Microscopy written by and published by . This book was released on 2007 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Probing Deviations from Traditional Colloid Filtration Theory by Atomic Forces Microscopy written by Marissa Devan Reno and published by . This book was released on 2005 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloid transport through saturated media is an integral component of predicting the fate and transport of groundwater contaminants. Developing sound predictive capabilities and establishing effective methodologies for remediation relies heavily on our ability to understand the pertinent physical and chemical mechanisms. Traditionally, colloid transport through saturated media has been described by classical colloid filtration theory (CFT), which predicts an exponential decrease in colloid concentration with travel distance. Furthermore, colloid stability as determined by Derjaguin-Landau-Veney-Overbeek (DLVO) theory predicts permanent attachment of unstable particles in a primary energy minimum. However, recent studies show significant deviations from these traditional theories. Deposition in the secondary energy minimum has been suggested as a mechanism by which observed deviations can occur. This work investigates the existence of the secondary energy minimum as predicted by DLVO theory using direct force measurements obtained by Atomic Forces Microscopy. Interaction energy as a function of separation distance between a colloid and a quartz surface in electrolyte solutions of varying ionic strength are obtained. Preliminary force measurements show promise and necessary modifications to the current experimental methodology have been identified. Stringent surface cleaning procedures and the use of high-purity water for all injectant solutions is necessary for the most accurate and precise measurements. Comparisons between direct physical measurements by Atomic Forces Microscopy with theoretical calculations and existing experimental findings will allow the evaluation of the existence or absence of a secondary energy minimum.
Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.
Download or read book Identifying Colloid Stabilizing Forces in Aqueous and Non Aqueous Media Using Atomic Force Microscopy and Extended DLVO Theory written by Michael Bower and published by . This book was released on 2009 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interfacial forces that dictate colloid stability in aqueous and non-aqueous systems are a function of the polar and apolar properties of the medium. This study quantifies these colloidal forces and energies between a glass microsphere and a glass surface in water and n-decane solutions using Atomic Force Microscopy (AFM). These solutions were amended systematically to identify the magnitudes of various contributing forces in aqueous and non-aqueous systems. For comparison, classical DLVO and Extended-DLVO (XDLVO) theory were used to calculate the free energy of interaction for each system. Long-range repulsive forces were measured in aqueous solutions and were generally predicted by DLVO theory. Small repulsive forces were measured in non-aqueous solutions at close separation distances (
Download or read book Liquid Cell Electron Microscopy written by Frances M. Ross and published by Cambridge University Press. This book was released on 2017 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2.6.2 Electrodes for Electrochemistry
Download or read book Atomic Force Microscopy in Process Engineering written by W. Richard Bowen and published by Butterworth-Heinemann. This book was released on 2009-06-30 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to bring together both the basic theory and proven process engineering practice of AFM. It is presented in a way that is accessible and valuable to practising engineers as well as to those who are improving their AFM skills and knowledge, and to researchers who are developing new products and solutions using AFM. The book takes a rigorous and practical approach that ensures it is directly applicable to process engineering problems. Fundamentals and techniques are concisely described, while specific benefits for process engineering are clearly defined and illustrated. Key content includes: particle-particle, and particle-bubble interactions; characterization of membrane surfaces; the development of fouling resistant membranes; nanoscale pharmaceutical analysis; nanoengineering for cellular sensing; polymers on surfaces; micro and nanoscale rheometry. Atomic force microscopy (AFM) is an important tool for process engineers and scientists as it enables improved processes and products The only book dealing with the theory and practical applications of atomic force microscopy in process engineering Provides best-practice guidance and experience on using AFM for process and product improvement
Download or read book Atomic Force Microscopy written by Bert Voigtländer and published by Springer. This book was released on 2019-05-23 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the operating principles of atomic force microscopy with the aim of enabling the reader to operate a scanning probe microscope successfully and understand the data obtained with the microscope. This enhanced second edition to "Scanning Probe Microscopy" (Springer, 2015) represents a substantial extension and revision to the part on atomic force microscopy of the previous book. Covering both fundamental and important technical aspects of atomic force microscopy, this book concentrates on the principles the methods using a didactic approach in an easily digestible manner. While primarily aimed at graduate students in physics, materials science, chemistry, nanoscience and engineering, this book is also useful for professionals and newcomers in the field, and is an ideal reference book in any atomic force microscopy lab.
Download or read book Biomolecular Simulations written by Massimiliano Bonomi and published by Humana. This book was released on 2020-08-14 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume explores the recent advancements in biomolecular simulations of proteins, small molecules, and nucleic acids, with a primary focus on classical molecular dynamics (MD) simulations at atomistic, coarse-grained, and quantum/ab-initio levels. The chapters in this book are divided into four parts: Part One looks at recent techniques used in the development of physic-chemical models of proteins, small molecules, nucleic acids, and lipids; Part Two discusses enhanced sampling and free-energy calculations; Part Three talks about integrative computational and experimental approaches for biomolecular simulations; and Part Four focuses on analyzing, visualizing, and comparing biomolecular simulations. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and tips on troubleshooting and avoiding known pitfalls. Cutting-edge and comprehensive, Biomolecular Simulations: Methods and Protocols is a valuable resource for both novice and expert researchers who are interested in studying different areas of biomolecular simulations, and discovering new tools to progress their future projects.
Download or read book Membrane Characterization written by Nidal Hilal and published by Elsevier. This book was released on 2017-02-18 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membrane Characterization provides a valuable source of information on how membranes are characterized, an extremely limited field that is confined to only brief descriptions in various technical papers available online. For the first time, readers will be able to understand the importance of membrane characterization, the techniques required, and the fundamental theory behind them. This book focuses on characterization techniques that are normally used for membranes prepared from polymeric, ceramic, and composite materials. Features specific details on many membrane characterization techniques for various membrane materials of industrial and academic interest Contains examples of international best practice techniques for the evaluation of several membrane parameters, including pore size, charge, and fouling Discusses various membrane models more suitable to a specific application Provides examples of ab initio calculations for the design, optimization, and scale-up of processes based on characterization data
Download or read book Freezing Colloids Observations Principles Control and Use written by Sylvain Deville and published by Springer. This book was released on 2017-01-19 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of the freezing of colloidal suspensions and explores cutting-edge research in the field. It is the first book to deal with this phenomenon from a multidisciplinary perspective, and examines the various occurrences, their technological uses, the fundamental phenomena, and the different modeling approaches. Its chapters integrate input from fields as diverse as materials science, physics, biology, mathematics, geophysics, and food science, and therefore provide an excellent point of departure for anyone interested in the topic. The main content is supplemented by a wealth of figures and illustrations to elucidate the concepts presented, and includes a final chapter providing advice for those starting out in the field. As such, the book provides an invaluable resource for materials scientists, physicists, biologists, and mathematicians, and will also benefit food engineers, civil engineers, and materials processing professionals.
Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Springer Handbook of Microscopy written by Peter W. Hawkes and published by Springer Nature. This book was released on 2019-11-02 with total page 1561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features reviews by leading experts on the methods and applications of modern forms of microscopy. The recent awards of Nobel Prizes awarded for super-resolution optical microscopy and cryo-electron microscopy have demonstrated the rich scientific opportunities for research in novel microscopies. Earlier Nobel Prizes for electron microscopy (the instrument itself and applications to biology), scanning probe microscopy and holography are a reminder of the central role of microscopy in modern science, from the study of nanostructures in materials science, physics and chemistry to structural biology. Separate chapters are devoted to confocal, fluorescent and related novel optical microscopies, coherent diffractive imaging, scanning probe microscopy, transmission electron microscopy in all its modes from aberration corrected and analytical to in-situ and time-resolved, low energy electron microscopy, photoelectron microscopy, cryo-electron microscopy in biology, and also ion microscopy. In addition to serving as an essential reference for researchers and teachers in the fields such as materials science, condensed matter physics, solid-state chemistry, structural biology and the molecular sciences generally, the Springer Handbook of Microscopy is a unified, coherent and pedagogically attractive text for advanced students who need an authoritative yet accessible guide to the science and practice of microscopy.
Download or read book Carbon Black written by Jean-Baptiste Donnet and published by Routledge. This book was released on 2018-05-04 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this reference provides comprehensive examinations of developments in the processing and applications of carbon black, including the use of new analytical tools such as scanning tunnelling microscopy, Fourier transform infrared spectroscopy and inverse gas chromatography.;Completely rewritten and updated by numerous experts in the field to reflect the enormous growth of the field since the publication of the previous edition, Carbon Black: discusses the mechanism of carbon black formation based on recent advances such as the discovery of fullerenes; elucidates micro- and macrostructure morphology and other physical characteristics; outlines the fractal geometry of carbon black as a new approach to characterization; reviews the effect of carbon black on the electrical and thermal conductivity of filled polymers; delineates the applications of carbon black in elastomers, plastics, and zerographic toners; and surveys possible health consequences of exposure to carbon black.;With over 1200 literature citations, tables, and figures, this resource is intended for physical, polymer, surface and colloid chemists; chemical and plastics engineers; spectroscopists; materials scientists; occupational safety and health physicians; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Science of Microscopy written by P.W. Hawkes and published by Springer Science & Business Media. This book was released on 2008-08-29 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully corrected second impression of the classic 2006 text on microscopy runs to more than 1,000 pages and covers up-to-the-minute developments in the field. The two-volume work brings together a slew of experts who present comprehensive reviews of all the latest instruments and new versions of the older ones, as well as their associated operational techniques. The chapters draw attention to their principal areas of application. A huge range of subjects are benefiting from these new tools, including semiconductor physics, medicine, molecular biology, the nanoworld in general, magnetism, and ferroelectricity. This fascinating book will be an indispensable guide for a wide range of scientists in university laboratories as well as engineers and scientists in industrial R&D departments.
Download or read book Modern Aspects of Colloidal Dispersions written by Ronald H. Ottewill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at a meeting sponsored by the Colloid and Interface Science Group of the Faraday Division, Royal Society of Chemistry, which was held at Wills Hall, University of Bristol from the 14th - 16th April 1997. The pur pose of the meeting, which was entitled Colloidal Dispersions, was to discuss the subject of concentrated colloidal systems including, dispersions, emulsions and powders, in order to emphasize recent advances in experimental and theoretical understanding of these systems and how these advances could be applied to practical utitisation in the wide range of industries which are involved with colloidal systems. The papers presented at the meeting were given by the principal participants in a 5 year project on Colloid Technology, which started on the 1st August 1992, and was funded by the Department of Trade and Industry (DTI) of the U.K. and a consortium of industries which was composed of ICI, Schlumberger, Unilever and Zeneca. The academic centres involved were, the Universities of Bristol, Cambridge, Edinburgh and Imperial College, London. Each of the papers published in this volume formed the focus for a discussion on that topic so that each subject was discussed in so me depth by the participants. J ean Proctor and Meg Staff have been tremendously helpful as secretaries at Bristol and Cambridge respectively throughout the project. Also, their help with the various meetings and with the production of this volume was invaluable. We thank them most warmly for their very able assistance.
Download or read book Atomic Force Microscopy in Liquid written by Arturo M. Baró and published by John Wiley & Sons. This book was released on 2012-05-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 40 % of current atomic force microscopy (AFM) research is performed in liquids, making liquid-based AFM a rapidly growing and important tool for the study of biological materials. This book focuses on the underlying principles and experimental aspects of AFM under liquid, with an easy-to-follow organization intended for new AFM scientists. The book also serves as an up-to-date review of new AFM techniques developed especially for biological samples. Aimed at physicists, materials scientists, biologists, analytical chemists, and medicinal chemists. An ideal reference book for libraries. From the contents: Part I: General Atomic Force Microscopy * AFM: Basic Concepts * Carbon Nanotube Tips in Atomic Force Microscopy with * Applications to Imaging in Liquid * Force Spectroscopy * Atomic Force Microscopy in Liquid * Fundamentals of AFM Cantilever Dynamics in Liquid * Environments * Single-Molecule Force Spectroscopy * High-Speed AFM for Observing Dynamic Processes in Liquid * Integration of AFM with Optical Microscopy Techniques Part II: Biological Applications * DNA and Protein-DNA Complexes * Single-Molecule Force Microscopy of Cellular Sensors * AFM-Based Single-Cell Force Spectroscopy * Nano-Surgical Manipulation of Living Cells with the AFM
