Download or read book Probing Crystal Plasticity at the Nanoscales written by Arief Suriadi Budiman and published by Springer. This book was released on 2014-12-27 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief highlights the search for strain gradients and geometrically necessary dislocations as a possible source of strength for two cases of deformation of materials at small scales: nanoindented single crystal copper and uniaxially compressed single crystal submicron gold pillars. When crystalline materials are mechanically deformed in small volumes, higher stresses are needed for plastic flow. This has been called the "Smaller is Stronger" phenomenon and has been widely observed. studies suggest that plasticity in one case is indeed controlled by the GNDs (strain gradient hardening), whereas in the other, plasticity is not controlled by strain gradients or sub-structure hardening, but rather by dislocation source starvation, wherein smaller volumes are stronger because fewer sources of dislocations are available (dislocation starvation hardening).
Download or read book Principles of Extreme Mechanics XM in Design for Reliability DfR written by Arief Suriadi Budiman and published by Springer Nature. This book was released on 2021-11-13 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses issues pertinent to mechanics and stress generation, especially in recent advanced cases of technology developments, spanning from micrometer interconnects in solar photovoltaics (PV), next-gen energy storage devices to multilayers of nano-scale composites enabling novel stretchable/flexible conductor technologies. In these cases, the mechanics of materials have been pushed to the extreme edges of human knowledge to enable cutting-edge, unprecedented functionalities and technological innovations. Synchrotron X-ray diffraction, in situ small-scale mechanical testing combined with physics-based computational modeling/simulation, has been widely used approaches to probe these mechanics of the materials at their extreme limits due to their recently discovered distinct advantages. The techniques discussed in this manuscript are highlights specially curated from the broad body of work recently reported in the literature, especially ones that the author had led the pursuits at the frontier himself. Extreme stress generation in these advanced material leads to often new failure modes, and hence, the reliability of the final product is directly affected. From the recent topics and various advanced case studies covered in this book, the reader gets an updated knowledge of how new mechanics can and has been applied in Design-for-Reliability (DfR) for some of the latest technological innovations known in our modern world. Further, this also helps in building better designs, which may avoid the pitfalls of the current practiced trends.
Download or read book Crystal Indentation Hardness written by Ronald W. Armstrong and published by MDPI. This book was released on 2018-07-05 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Crystal Indentation Hardness" that was published in Crystals
Download or read book Crystal Plasticity written by Wojciech Polkowski and published by MDPI. This book was released on 2021-04-27 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a collection of 25 original papers (including one review paper) on state-of-the art achievements in the theory and practice of crystals plasticity. The articles cover a wide scope of research on materials behavior subjected to external loadings, starting from atomic-scale simulations, and a new methodological aspect, to experiments on a structure and mechanical response upon a large-scale processing. Thus, a presented contribution of researchers from 18 different countries can be virtually divided into three groups, namely (i) “modelling and simulation”; (ii) “methodological aspects”; and (iii) “experiments on process/structure/properties relationship”. Furthermore, a large variety of materials are investigated including more conventional (steels, copper, titanium, nickel, aluminum, and magnesium alloys) and advanced ones (composites or high entropy alloys). The book should be interested for senior students, researchers and engineers working within discipline of materials science and solid state physics of crystalline materials.
Download or read book Dislocation Mechanism Based Crystal Plasticity written by Zhuo Zhuang and published by Academic Press. This book was released on 2019-04-12 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocation Based Crystal Plasticity: Theory and Computation at Micron and Submicron Scale provides a comprehensive introduction to the continuum and discreteness dislocation mechanism-based theories and computational methods of crystal plasticity at the micron and submicron scale. Sections cover the fundamental concept of conventional crystal plasticity theory at the macro-scale without size effect, strain gradient crystal plasticity theory based on Taylar law dislocation, mechanism at the mesoscale, phase-field theory of crystal plasticity, computation at the submicron scale, including single crystal plasticity theory, and the discrete-continuous model of crystal plasticity with three-dimensional discrete dislocation dynamics coupling finite element method (DDD-FEM). Three kinds of plastic deformation mechanisms for submicron pillars are systematically presented. Further sections discuss dislocation nucleation and starvation at high strain rate and temperature effect for dislocation annihilation mechanism. - Covers dislocation mechanism-based crystal plasticity theory and computation at the micron and submicron scale - Presents crystal plasticity theory without size effect - Deals with the 3D discrete-continuous (3D DCM) theoretic and computational model of crystal plasticity with 3D discrete dislocation dynamics (3D DDD) coupling finite element method (FEM) - Includes discrete dislocation mechanism-based theory and computation at the submicron scale with single arm source, coating micropillar, lower cyclic loading pillars, and dislocation starvation at the submicron scale
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Recent Advances in Fluorescent Probes for Super Resolution Microscopy written by Chayan Kanti Nandi and published by Frontiers Media SA. This book was released on 2021-07-21 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Nanoscience and Nanotechnology written by and published by Academic Press. This book was released on 2019-01-02 with total page 1881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nanoscience and Technology, Second Edition, Five Volume Set allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field
Download or read book Mechanics and Physics of Solids at Micro and Nano Scales written by Ioan R. Ionescu and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chronicling the 11th US France Mechanics and physics of solids at macro- and nano-scales symposium, organized by ICACM (International Center for Applied Computational Mechanics) in Paris, June 2018, this book addresses the breadth of issues raised. It covers a comprehensive range of scientific and technological topics (from elementary plastic events in metals and materials in harsh environments to bio-engineered and bio-mimicking materials), offering a representative perspective on state-of-the-art research and materials. Expounding on the issues related to mesoscale modeling, the first part of the book addresses the representation of plastic deformation at both extremes of the scale between nano- and macro- levels. The second half of the book examines the mechanics and physics of soft materials, polymers and materials made from fibers or molecular networks.
Download or read book Engineering Plasticity from Macroscale to Nanoscale written by Liang Chi Zhang and published by Trans Tech Publications Ltd. This book was released on 2003-01-15 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: AEPA 2002 Proceedings of the 6th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, Sydney, Australia, December 2-6, 2002
Download or read book Engineering Plasticity and Its Applications from Nanoscale to Macroscale written by Hoon Huh and published by World Scientific. This book was released on 2009 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of the Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA) is to provide a free forum for exchanging ideas and introducing the latest research findings in the field of engineering plasticity. This conference is unique among the related conferences in that it provides a forum for all fields of plasticity so that multi-disciplinary research works are encouraged. This proceedings volume consists of papers presented at AEPA2008, and covers the following categories in all fields of engineering plasticity: constitutive modeling; damage, fracture, fatigue and failure; dynamic loading and crash dynamics; engineering applications and case studies; experimental and numerical techniques; molecular dynamics; nano, meso, micro and crystal plasticity; phase transformations; plastic instability and strain localization; plasticity in advanced materials; plasticity in materials processing technology; plasticity in tribology; porous, cellular and composite materials; structural plasticity; superplasticity; and time-dependent deformation. Ranging from nanoscale to macroscale applications of engineering plasticity, this book touches upon fields as diverse as mechanical engineering, materials science, physics, chemistry and civil engineering.
Download or read book Probing Crystal Plasticity at the Nanoscales written by Arief Budiman and published by . This book was released on 2015-01-31 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Transmission Electron Microscope written by Khan Maaz and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "The Transmission Electron Microscope" contains a collection of research articles submitted by engineers and scientists to present an overview of different aspects of TEM from the basic mechanisms and diagnosis to the latest advancements in the field. The book presents descriptions of electron microscopy, models for improved sample sizing and handling, new methods of image projection, and experimental methodologies for nanomaterials studies. The selection of chapters focuses on transmission electron microscopy used in material characterization, with special emphasis on both the theoretical and experimental aspect of modern electron microscopy techniques. I believe that a broad range of readers, such as students, scientists and engineers will benefit from this book.
Download or read book Applied Scanning Probe Methods I written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2014-02-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the physical and technical foundation for recent progress with this technique, Applied Scanning Probe Methods offers a timely and comprehensive overview of SPM applications, now that industrial applications span topographic and dynamical surface studies of thin-film semiconductors, polymers, paper, ceramics, and magnetic and biological materials. First it lays the theoretical background of static and dynamic force microscopies, including sensor technology and tip characterization, contributions detail applications such as macro- and nanotribology, polymer surfaces, and roughness investigations. The final part on industrial research addresses special applications of scanning force nanoprobes such as atomic manipulation and surface modification, as well as single electron devices based on SPM.
Download or read book Nano and Cell Mechanics written by Horacio D. Espinosa and published by John Wiley & Sons. This book was released on 2012-12-12 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in nano and cell mechanics has received much attention from the scientific community as a result of society needs and government initiatives to accelerate developments in materials, manufacturing, electronics, medicine and healthcare, energy, and the environment. Engineers and scientists are currently engaging in increasingly complex scientific problems that require interdisciplinary approaches. In this regard, studies in this field draw from fundamentals in atomistic scale phenomena, biology, statistical and continuum mechanics, and multiscale modeling and experimentation. As a result, contributions in these areas are spread over a large number of specialized journals, which prompted the Editors to assemble this book. Nano and Cell Mechanics: Fundamentals and Frontiers brings together many of the new developments in the field for the first time, and covers fundamentals and frontiers in mechanics to accelerate developments in nano- and bio-technologies. Key features: • Provides an overview of recent advances in nano and cell mechanics. • Covers experimental, analytical, and computational tools used to investigate biological and nanoscale phenomena. • Covers fundamentals and frontiers in mechanics to accelerate developments in nano- and bio-technologies. • Presents multiscale-multiphysics modeling and experimentation techniques. • Examines applications in materials, manufacturing, electronics, medicine and healthcare. Nano and Cell Mechanics: Fundamentals and Frontiers is written by internationally recognized experts in theoretical and applied mechanics, applied physics, chemistry, and biology. It is an invaluable reference for graduate students of nano- and bio-technologies, researchers in academia and industry who are working in nano and cell mechanics, and practitioners who are interested in learning about the latest analysis tools. The book can also serve as a text for graduate courses in theoretical and applied mechanics, mechanical engineering, materials science, and applied physics.
Download or read book Hot Topics in Crystal Engineering written by Kari Rissanen and published by Elsevier. This book was released on 2021-08-24 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot Topics in Crystal Engineering covers the design and synthesis of single crystalline solid-state materials, their properties and applications, focusing on the understanding and use of intermolecular interactions that constitute single crystalline materials. Many of the most modern materials, such as metal-organic frameworks (MOFs) capable of gas storage and separation, and selective entrapment of harmful substances, are the result of the rational use of crystal engineering. Topics covered in this work highlight breakthroughs in this rapidly developing field. This work offers a carefully chosen cross-section of the latest developments, some in their early infancy and some covered for the first time. - Provides comprehensive and authoritative articles, giving readers access to a wealth of information to fully support their research and activities - Covers the latest developments in crystal engineering, including topics which are in their early infancy - Written by leading international experts
Download or read book Applied Nanoindentation in Advanced Materials written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2017-10-30 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the area of nanoindentation has gained significant momentum in recent years, but there are very few books currently available which can educate researchers on the application aspects of this technique in various areas of materials science. Applied Nanoindentation in Advanced Materials addresses this need and is a comprehensive, self-contained reference covering applied aspects of nanoindentation in advanced materials. With contributions from leading researchers in the field, this book is divided into three parts. Part one covers innovations and analysis, and parts two and three examine the application and evaluation of soft and ceramic-like materials respectively. Key features: A one stop solution for scholars and researchers to learn applied aspects of nanoindentation Contains contributions from leading researchers in the field Includes the analysis of key properties that can be studied using the nanoindentation technique Covers recent innovations Includes worked examples Applied Nanoindentation in Advanced Materials is an ideal reference for researchers and practitioners working in the areas of nanotechnology and nanomechanics, and is also a useful source of information for graduate students in mechanical and materials engineering, and chemistry. This book also contains a wealth of information for scientists and engineers interested in mathematical modelling and simulations related to nanoindentation testing and analysis.
