Download or read book Probabilistic Roadmaps for Path Planning in High dimensional Configuration Spaces written by Lydia Kavraki and published by . This book was released on 1994 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new motion planning method for robots in static workspaces is presented. This method proceeds according to two phases: a learning phase and a query phase. In the learning phase, a probabilistic roadmap is constructed and stored as a graph whose nodes correspond to collision-free configurations and edges to feasible paths between these configurations. These paths are computed using a simple and fast local planner. In the query phase, any given start and goal configurations of the robot are connected to two nodes of the roadmap; the roadmap is then searched for a path joining these two nodes. The method is general and easy to implement. It can be applied to virtually any type of holonomic robot. It requires selecting certain parameters (e.g., the duration of the learning phase) whose values depend on the considered scenes, that is the robots and their workspaces. But these values turn out to be relatively easy to choose. Increased efficiency can also be achieved by tailoring some components of the method (e.g., the local planner) to the considered robots. In this paper the method is applied to planar articulated robots with many degrees of freedom. Experimental results show that path planning can be done in a fraction of a second on a contemporary workstation (approximately 150 MIPS), after learning for relatively short periods of time (a few dozen seconds).
Download or read book Probalistic Roadmaps for Path Planning in High dimensional Configuration Spaces written by L. Kavraki and published by . This book was released on 1994 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Algorithmic Foundations of Robotics V written by Jean-Daniel Boissonnat and published by Springer Science & Business Media. This book was released on 2003-09-11 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected contributions to the Workshop WAFR 2002, held December 15-17, 2002, Nice, France. This fifth biannual Workshop on Algorithmic Foundations of Robotics focuses on algorithmic issues related to robotics and automation. The design and analysis of robot algorithms raises fundamental questions in computer science, computational geometry, mechanical modeling, operations research, control theory, and associated fields. The highly selective program highlights significant new results such as algorithmic models and complexity bounds. The validation of algorithms, design concepts, or techniques is the common thread running through this focused collection.
Download or read book Robot Motion Planning written by Jean-Claude Latombe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the ultimate goals in Robotics is to create autonomous robots. Such robots will accept high-level descriptions of tasks and will execute them without further human intervention. The input descriptions will specify what the user wants done rather than how to do it. The robots will be any kind of versatile mechanical device equipped with actuators and sensors under the control of a computing system. Making progress toward autonomous robots is of major practical inter est in a wide variety of application domains including manufacturing, construction, waste management, space exploration, undersea work, as sistance for the disabled, and medical surgery. It is also of great technical interest, especially for Computer Science, because it raises challenging and rich computational issues from which new concepts of broad useful ness are likely to emerge. Developing the technologies necessary for autonomous robots is a formidable undertaking with deep interweaved ramifications in auto mated reasoning, perception and control. It raises many important prob lems. One of them - motion planning - is the central theme of this book. It can be loosely stated as follows: How can a robot decide what motions to perform in order to achieve goal arrangements of physical objects? This capability is eminently necessary since, by definition, a robot accomplishes tasks by moving in the real world. The minimum one would expect from an autonomous robot is the ability to plan its x Preface own motions.
Download or read book Robotics Research written by Raymond Austin Jarvis and published by Springer. This book was released on 2003-09-05 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the dawn of the new millennium, robotics is undergoing a major transfor- tion in scope and dimension. From a largely dominant industrial focus, robotics is rapidly expanding into the challenges of unstructured environments. Inter- ting with, assisting, serving, and exploring with humans, the emerging robots will increasingly touch people and their lives. The goal of this new series of Springer Tracts in Advanced Robotics is to bring,inatimelyfashion,thelatestadvancesanddevelopmentsinroboticsonthe basisoftheirsigni?canceandquality.Itisourhopethatthegreaterdissemination of research developments will stimulate more exchanges and collaborations among the research community and contribute to further advancement of this rapidly growing ?eld. As one of robotics pioneering symposia, ISRR, the "International Sym- sium on Robotics Research," has established over the past two decades some of the ?eld’s most fundamental and lasting contributions.With the launching of STAR, this and other thematic symposia devoted to excellence in robotics ?nd an important platform for closer links and extended reach within the research community. The Tenth edition of "Robotics Research" edited by Raymond Jarvis and AlexZelinskyoffersinits11-partvolumeacollectionofabroadrangeoftopics in robotics. The content of these contributions provides a wide coverage of the current state of robotics research: the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new areas of applications.
Download or read book Probability based Path Planning for Stochastic Nonholonomic Systems with Obstacle Avoidance written by Jianping Lin and published by . This book was released on 2015 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: There exist various path planning methods in robotics. The Probabilistic Roadmap and Rapidly-exploring Random Tree (RRT) became popular in recent decades. It is known that the RRT is more suitable for nonholonomic systems. The RRT is a sampling-based algorithm which is designed for path planning problem and is efficient to handle high-dimensional configuration space (C-space) and nonholonomic constraints. Under the constraints, the RRT can generate paths between an initial state and a goal state while avoiding obstacles. However it does not guarantee that the resulting path is optimal. In systems with stochasticity, targeting error and closeness of the obstacle to the planned path can be considered to obtain the optimal path. In this thesis, the targeting error is defined as the root-mean-square (RMS) distance from the path samples to the desired target and the closeness is defined as probability of obstacle collision. Then, a cost function is defined as a sum of the targeting error and the obstacle closeness, and numerically minimized to find the path. The RRT result serves as an initial starting point for this subsequent optimization.
Download or read book Robot Motion Planning and Control written by Jean-Paul Laumond and published by Springer. This book was released on 1998 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Content Description #Includes bibliographical references.
Download or read book The Complexity of Robot Motion Planning written by John Canny and published by MIT Press. This book was released on 1988 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Complexity of Robot Motion Planning makes original contributions both to roboticsand to the analysis of algorithms. In this groundbreaking monograph John Canny resolveslong-standing problems concerning the complexity of motion planning and, for the central problem offinding a collision free path for a jointed robot in the presence of obstacles, obtains exponentialspeedups over existing algorithms by applying high-powered new mathematical techniques.Canny's newalgorithm for this "generalized movers' problem," the most-studied and basic robot motion planningproblem, has a single exponential running time, and is polynomial for any given robot. The algorithmhas an optimal running time exponent and is based on the notion of roadmaps - one-dimensionalsubsets of the robot's configuration space. In deriving the single exponential bound, Cannyintroduces and reveals the power of two tools that have not been previously used in geometricalgorithms: the generalized (multivariable) resultant for a system of polynomials and Whitney'snotion of stratified sets. He has also developed a novel representation of object orientation basedon unnormalized quaternions which reduces the complexity of the algorithms and enhances theirpractical applicability.After dealing with the movers' problem, the book next attacks and derivesseveral lower bounds on extensions of the problem: finding the shortest path among polyhedralobstacles, planning with velocity limits, and compliant motion planning with uncertainty. Itintroduces a clever technique, "path encoding," that allows a proof of NP-hardness for the first twoproblems and then shows that the general form of compliant motion planning, a problem that is thefocus of a great deal of recent work in robotics, is non-deterministic exponential time hard. Cannyproves this result using a highly original construction.John Canny received his doctorate from MITAnd is an assistant professor in the Computer Science Division at the University of California,Berkeley. The Complexity of Robot Motion Planning is the winner of the 1987 ACM DoctoralDissertation Award.
Download or read book Algorithmic Foundations of Robotics VIII written by Gregory S. Chirikjian and published by Springer Science & Business Media. This book was released on 2010-02-04 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions to WAFR, the highly-competitive meeting on the algorithmic foundations of robotics. They address the unique combination of questions that the design and analysis of robot algorithms inspires.
Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Robotics Research written by Nancy M. Amato and published by Springer Nature. This book was released on 2019-11-28 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics pioneering Symposia, which has established over the past two decades some of the field's most fundamental and lasting contributions. This book presents the results of the eighteenth edition of "Robotics Research" ISRR17, offering a collection of a broad range of topics in robotics. This symposium took place in Puerto Varas, Chile from December 11th to December 14th, 2017. The content of the contributions provides a wide coverage of the current state of robotics research, the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope and define the state of the art of robotics and its future direction.
Download or read book Mechatronics Industry Inspired Advances written by Adam Martowicz and published by Springer Nature. This book was released on with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vision Based Mobile Robot Control and Path Planning Algorithms in Obstacle Environments Using Type 2 Fuzzy Logic written by Mahmut Dirik and published by Springer Nature. This book was released on 2021-03-01 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes topics, such as: path planning, avoiding obstacles, following the path, go-to-goal control, localization, and visual-based motion control. The theoretical concepts are illustrated with a developed control architecture with soft computing and artificial intelligence methods. The proposed vision-based motion control strategy involves three stages. The first stage consists of the overhead camera calibration and the configuration of the working environment. The second stage consists of a path planning strategy using several traditional path planning algorithms and proposed planning algorithm. The third stage consists of the path tracking process using previously developed Gauss and Decision Tree control approaches and the proposed Type-1 and Type-2 controllers. Two kinematic structures are utilized to acquire the input values of controllers. These are Triangle Shape-Based Controller Design, which was previously developed and Distance-Based Triangle Structure that is used for the first time in conducted experiments. Four different control algorithms, Type-1 fuzzy logic, Type-2 Fuzzy Logic, Decision Tree Control, and Gaussian Control have been used in overall system design. The developed system includes several modules that simplify characterizing the motion control of the robot and ensure that it maintains a safe distance without colliding with any obstacles on the way to the target. The topics of the book are extremely relevant in many areas of research, as well as in education in courses in computer science, electrical and mechanical engineering and in mathematics at the graduate and undergraduate levels.
Download or read book Handbook of Research of Internet of Things and Cyber Physical Systems written by Amit Kumar Tyagi and published by CRC Press. This book was released on 2022-06-08 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume discusses how integrating IoT devices and cyber-physical systems can help society by providing multiple efficient and affordable services to users. It covers the various applications of IoT-based cyber-physical systems, such as satellite imaging in relation to climate change, industrial control systems, e-healthcare applications, security uses, automotive and traffic monitoring and control, urban smart city planning, and more. The authors also outline the methods, tools, and algorithms for IoT-based cyber-physical systems and explore the integration of machine learning, blockchain, and Internet of Things-based cloud applications. With the continuous emerging new technologies and trends in IoT technology and CPS, this volume will be a helpful resource for scientists, researchers, industry professionals, faculty and students, and others who wish to keep abreast of new developments and new challenges for sustainable development in Industry 4.0.
Download or read book Towards Autonomous Robotic Systems written by Ashutosh Natraj and published by Springer. This book was released on 2014-06-27 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th Conference on Advances in Autonomous Robotics, TAROS 2013, held in Oxford, UK, in August 2013. The 36 revised full papers presented together with 25 extended abstracts were carefully reviewed and selected from 89 submissions. The papers cover various topics such as artificial intelligence, bio-inspired and aerial robotics, computer vision, control, humanoid and robotic arm, swarm robotics, verification and ethics.
Download or read book Robotics Research written by Paolo Dario and published by Springer. This book was released on 2005-08-24 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISRR, the "International Symposium on Robotics Research", is one of robotics’ pioneering symposia, which has established some of the field's most fundamental and lasting contributions over the past two decades. This book presents the results of the eleventh edition of "Robotics Research" ISRR03, offering a broad range of topics in robotics. The contributions provide a wide coverage of the current state of robotics research: the advances and challenges in its theoretical foundation and technology basis, and the developments in its traditional and new emerging areas of applications. The diversity, novelty, and span of the work unfolding in these areas reveal the field's increased maturity and expanded scope, and define the state of the art of robotics and its future direction.
