Download or read book Probabilistic Site Characterization at the National Geotechnical Experimentation Sites written by Erik Vanmarcke and published by . This book was released on 2003 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 121 contains seven peer-reviewed papers exploring a broad range of methods of probabilistic site characterization.
Download or read book Probabilistic Approaches for Geotechnical Site Characterization and Slope Stability Analysis written by Zijun Cao and published by Springer. This book was released on 2016-08-06 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to revisit geotechnical site characterization from a probabilistic point of view and provide rational tools to probabilistically characterize geotechnical properties and underground stratigraphy using limited information obtained from a specific site. This book not only provides new probabilistic approaches for geotechnical site characterization and slope stability analysis, but also tackles the difficulties in practical implementation of these approaches. In addition, this book also develops efficient Monte Carlo simulation approaches for slope stability analysis and implements these approaches in a commonly available spreadsheet environment. These approaches and the software package are readily available to geotechnical practitioners and alleviate them from reliability computational algorithms. The readers will find useful information for a non-specialist to determine project-specific statistics of geotechnical properties and to perform probabilistic analysis of slope stability.
Download or read book Geotechnical and Geophysical Site Characterization written by An-Bin Huang and published by CRC Press. This book was released on 2008-04-04 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical and Geophysical Site Characterization collects the papers presented at the Third International Conference on Site Characterization (ISC 3) that took place in Taipei from April 1-4, 2008. The subjects covered include new developments in mechanical in-situ testing and interpretation techniques, statistical analysis of test data, geo
Download or read book Geotechnical Risk and Safety written by Yusuke Honjo and published by CRC Press. This book was released on 2009-06-01 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Communication of risks within a transparent and accountable framework is essential in view of increasing mobility and the complexity of the modern society and the field of geotechnical engineering does not form an exception. As a result, modern risk assessment and management are required in all aspects of geotechnical issues, such as planning, design, construction of geotechnical structures, mitigation of geo-hazards, management of large construction projects, maintenance of structures and life-cycle cost evaluation. This volume discusses: 1. Evaluation and control of uncertainties through investigation, design and construction of geotechnical structures; 2. Performance-based specifications, reliability based design and limit state design of geotechnical structures, and design code developments; 3. Risk assessment and management of geo-hazards, such as landslides, earthquakes, debris flow, etc.; 4. Risk management issues concerning large geotechnical construction projects; 5. Repair and maintenance strategies of geotechnical structures. Intended for researchers and practitioners in geotechnical, geological, infrastructure and construction engineering.
Download or read book Risk and Variability in Geotechnical Engineering written by Michael A. Hicks and published by Thomas Telford. This book was released on 2007 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting edge techniques for characterising, quantifying and modelling geomaterial variability in addition to methods for quantifying the influence of this variability on the performance of geotechnical structures. It includes state-of-the-art refereed journal papers by leading international researchers along with written and informal discussions on a selection of key submissions that were presented at a Symposium at the Institution of Civil Engineers on 9th May 2005.
Download or read book Computer Methods and Advances in Geomechanics written by D. Contractor and published by CRC Press. This book was released on 2000-01-01 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a wide range of topics involving both research developments and applications, resulting from the 10th International Conferecne on Computer Methods and Advances in Geomechanics (IACMAG) held in January 2001 in Tucson, Arizona, USA. The theme of the conference was Fundamentals through Applications. The up-to-date research results and applications in this 2-volume work (> 1900 pages) should serve as a valuable source of information for those engaged in research, analysis and design, practical application, and education in the fields of geomechanics and geotechnical engineering.
Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 2430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.
Download or read book Uncertainty Modeling and Decision Making in Geotechnics written by Kok-Kwang Phoon and published by CRC Press. This book was released on 2023-12-11 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty, Modeling, and Decision Making in Geotechnics shows how uncertainty quantification and numerical modeling can complement each other to enhance decision-making in geotechnical practice, filling a critical gap in guiding practitioners to address uncertainties directly. The book helps practitioners acquire a working knowledge of geotechnical risk and reliability methods and guides them to use these methods wisely in conjunction with data and numerical modeling. In particular, it provides guidance on the selection of realistic statistics and a cost-effective, accessible method to address different design objectives, and for different problem settings, and illustrates the value of this to decision-making using realistic examples. Bringing together statistical characterization, reliability analysis, reliability-based design, probabilistic inverse analysis, and physical insights drawn from case studies, this reference guide from an international team of experts offers an excellent resource for state-of-the-practice uncertainty-informed geotechnical design for specialist practitioners and the research community.
Download or read book Site and Geomaterial Characterization written by Anand J. Puppala and published by . This book was released on 2006 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 149 contains 40 papers on site and geomaterial characterization presented at the GeoShanghai Conference, held in Shanghai, China, June 6-8, 2006.
Download or read book Characterisation and Engineering Properties of Natural Soils Two Volume Set written by T.S. Tan and published by CRC Press. This book was released on 2006-11-16 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first two volumes, published in 2002, volumes 3 and 4 of Characterisation and Engineering Properties of Natural Soils review laboratory testing, in-situ testing, and methods of characterising natural soil variability, illustrated by actual site data. Less well-documented soil types are highlighted and the various papers take i
Download or read book Random Fields written by Erik Vanmarcke and published by World Scientific. This book was released on 2010 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Random variation is a fact of life that provides substance to a wide range of problems in the sciences, engineering, and economics. There is a growing need in diverse disciplines to model complex patterns of variation and interdependence using random fields, as both deterministic treatment and conventional statistics are often insufficient. An ideal random field model will capture key features of complex random phenomena in terms of a minimum number of physically meaningful and experimentally accessible parameters. This volume, a revised and expanded edition of an acclaimed book first published by the M I T Press, offers a synthesis of methods to describe and analyze and, where appropriate, predict and control random fields. There is much new material, covering both theory and applications, notably on a class of probability distributions derived from quantum mechanics, relevant to stochastic modeling in fields such as cosmology, biology and system reliability, and on discrete-unit or agent-based random processes.Random Fields is self-contained and unified in presentation. The first edition was found, in a review in EOS (American Geophysical Union) to be ?both technically interesting and a pleasure to read ? the presentation is clear and the book should be useful to almost anyone who uses random processes to solve problems in engineering or science ? and (there is) continued emphasis on describing the mathematics in physical terms.?
Download or read book Design of Urban Stormwater Controls MOP 23 written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2012-05-07 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Techniques for Designing Urban Stormwater Controls Fully updated to address the paradigm shift in the way stormwater is viewed and managed, Design of Urban Stormwater Controls focuses on consolidating technologies to foster a convergence between traditional stormwater controls and green infrastructure. This authoritative resource explains how systems of stormwater controls can be designed to meet multidisciplinary objectives, including flood control; stream channel protection; groundwater recharge; water quality improvement; protection of public safety, health, and welfare; and multipurpose public benefits. Coverage includes: Urban stormwater management overview Effects of stormwater on receiving waters Performance goals for stormwater controls Unit processes and operations for stormwater control Selection criteria and design considerations Swales and strips Basins Filters and infiltrators Gross pollutant traps and mechanical operations Maintenance of stormwater controls Whole life cost of stormwater controls Performance assessment Analytical tools for simulation of stormwater controls
Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-06-24 with total page 2767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.
Download or read book International Conference on Multi disciplinary Technologies and challenges in Industry 4 0 written by Dr. Prakash s, dr. Silvia liberataullo, dr. Yogesh g s, dr. I manimozhi, prof. Shilpa patil. and published by Archers & Elevators Publishing House. This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reliability of Geotechnical Structures in ISO2394 written by K.K. Phoon and published by CRC Press. This book was released on 2016-11-25 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest 4th edition of the international standard on the principles of reliability for load bearing structures (ISO2394:2015) includes a new Annex D dedicated to the reliability of geotechnical structures. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process. This book contains a wealth of data and information to assist geotechnical engineers with the implementation of semi-probabilistic or full probabilistic design approaches within the context of established geotechnical knowledge, principles, and experience. The introduction to the book presents an overview on how reliability can play a complementary role within prevailing norms in geotechnical practice to address situations where some measured data and/or past experience exist for limited site-specifi c data to be supplemented by both objective regional data and subjective judgment derived from comparable sites elsewhere. The principles of reliability as presented in ISO2394:2015 provides the common basis for harmonization of structural and geotechnical design. The balance of the chapters describes the uncertainty representation of geotechnical design parameters, the statistical characterization of multivariate geotechnical data and model factors, semi-probabilistic and direct probability-based design methods in accordance to the outline of Annex D. This book elaborates and reinforces the goal of Annex D to advance geotechnical reliability-based design with geotechnical needs at the forefront while complying with the general principles of reliability given by ISO2394:2015. It serves as a supplementary reference to Annex D and it is a must-read for designing geotechnical structures in compliance with ISO2394:2015.
Download or read book Numerical Methods in Geotechnical Engineering IX Volume 1 written by Manuel de Matos Fernandes and published by CRC Press. This book was released on 2018-06-22 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: NUMGE 2018 is the ninth in a series of conferences on Numerical Methods in Geotechnical Engineering organized by the ERTC7 under the auspices of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). The first conference was held in 1986 in Stuttgart, Germany and the series continued every four years (1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands). The conference provides a forum for exchange of ideas and discussion on topics related to numerical modelling in geotechnical engineering. Both senior and young researchers, as well as scientists and engineers from Europe and overseas, are invited to attend this conference to share and exchange their knowledge and experiences. This work is the first volume of NUMGE 2018.
Download or read book Site Characterization for Probabilistic Ground Shock Predictions written by John Guy Jackson and published by . This book was released on 1982 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
