Download or read book Printed MIMO Antenna Engineering written by Mohammad S. Sharawi and published by Artech House. This book was released on 2014-05-01 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990’s as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication. A perfect design companion for practicing engineers, this book provides full design examples from literature, along with detailed illustrations for the various antenna geometries. This resource overviews the various applications that currently depend on printed MIMO antennas, and provides design guidelines and remarks throughout the book for guidance.

Download or read book MIMO Antennas for Wireless Communication written by Leeladhar Malviya and published by CRC Press. This book was released on 2020-12-15 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desired objective of this book is to investigate diversity and mutual coupling effects on MIMO antenna designs for WLAN/WiMAX/LTE applications, controlled with diversity and ground modification techniques including equivalent circuit diagrams. Diversity techniques in MIMO antennas leading to the performance improvement ratings are demonstrated and deliberated. The book contributes towards the development of 2:1 VSWR MIMO antennas with diversity techniques for indoor/outdoor applications for high data rate, QOS, and SNR. The improved MIMO antenna structures are investigated and presented in this book including part of massive MIMO to provide the important aspects of emerging technology. Aimed at researchers, professionals and graduate students in electrical engineering, electromagnetics, communications and signal processing including antenna theory and design, smart antennas, communication systems, this book: Investigates real time MIMO antenna designs for WLAN/WiMAX/LTE applications. Covers effects of ECC, MEG, TARC, and equivalent circuit. Addresses the coupling and diversity aspects of antenna design problem for MIMO systems. Focus on the MIMO antenna designs for the real time applications. Exclusive chapter on 5G Massive MIMO along with case studies throughout the book.

Download or read book MIMO Antennas for Wireless Communication written by LEELADHAR. MALVIYA and published by CRC Press. This book was released on 2023-09-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desired objective of the book is to investigate diversity and mutual coupling effects on MIMO antenna designs for WLAN/WiMAX/LTE applications, controlled with diversity and ground modification techniques including equivalent circuit diagrams. The improved MIMO antenna structures and massive MIMO are covered to illustrate the technology.

Download or read book Microstrip and Printed Antennas Applications Based Designs written by Anil Pandey and published by Artech House. This book was released on 2019-03-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource presents antenna fundamentals balanced with the design of printed antennas. Over 70 antenna projects, along with design dimensions, design flows and antenna performance results are discussed, including antennas for wireless communication, 5G antennas and beamforming. Examples of smartphone antennas, MIMO antennas, aerospace and satellite remote sensing array antennas, automotive antennas and radar systems and many more printed antennas for various applications are also included. These projects include design dimensions and parameters that incorporate the various techniques used by industries and academia. This book is intended to serve as a practical microstrip and printed antenna design guide to cover various real-world applications. All Antenna projects discussed in this book are designed, analyzed and simulated using full-wave electromagnetic solvers. Based on several years of the author’s research in antenna design and development for RF and microwave applications, this book offers an in-depth coverage of practical printed antenna design methodology for modern applications.

Download or read book Printed Antennas for Wireless Communications written by Rod Waterhouse and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed antennas, also known as microstrip antennas, have a variety of beneficial properties including mechanical durability, conformability, compactness and cheap manufacturing costs. As such, they have a range of applications in both the military and commercial sectors, and are often mounted on the exterior of aircraft and spacecraft as well as incorporated into mobile radio communication devices. Printed Antennas for Wireless Communications offers a practical guide to state-of-the-art printed antenna technology used for wireless systems. Contributions from renowned global experts within both academia and industry enable the reader to design printed antennas and associated technologies, and offer valuable insights into important breakthroughs in these areas. Divided into 3 sections covering fundamental wideband printed radiating elements for wireless systems, small printed antennas for wireless systems, and advanced concepts and applications in wireless systems. Provides experimental data and applies theoretical models to present design performance trends and to give the reader an in-depth coverage of the area. Presents summaries of different approaches used in solving wireless systems such as WPAN (wireless personal area network) and MIMO (multi-input/ multi-output), offering the reader an overall perspective of the pros and cons of each. Focuses on practical design, examples and ‘real world’ solutions. Printed Antennas for Wireless Communications offers an excellent insight on printed antennas from the theoretical to the practical; hence it will appeal to practicing design engineers within commercial and governmental/ military organistations, as well as postagraduate students and researchers in communications technology

Download or read book Compact Antennas for High Data Rate Communication written by Jagannath Malik and published by Springer. This book was released on 2017-08-01 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the development of promising technologies for compact antennas for high data-rate communications. It discusses and analyzes the design of compact ultra-wideband (UWB) and multiple input, multiple output (MIMO) antennas, providing essential know-how for designers, practicing engineers and scientists. These wireless communication technologies enable consumers to have convenient access to a wide range of services – anytime, anywhere. And the introduction of wireless mobile access points eliminates the limitations to communication imposed by geographical location. The Internet has allowed people to access and share information much more rapidly, but in order to achieve higher data rates with the limited available resources and imposed constraints, wireless communication technology needs to be pushed beyond the physical limits of the propagation channel. This book contributes to achieving this goal.

Download or read book Printed Antennas written by Binod Kumar Kanaujia and published by CRC Press. This book was released on 2020-11-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed antennas have become an integral part of next-generation wireless communications and have been found to be commonly used to improve system capacity, data rate, reliability, etc. This book covers theory, design techniques, and the chronological regression of the printed antennas for various applications. This book will provide readers with the basic conceptual knowledge about antennas along with advanced techniques for antenna design. It covers a variety of analytical techniques and their CAD applications and discusses new applications of printed antenna technology such as sensing. The authors also present special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS. The book will be useful to students as an introduction to design and applications of antennas. Additionally, experienced researchers in this field will find this book a ready reference and benefit from the techniques of research in printed antennas included in this book. Following are some of the salient features of this book: Covers a variety of analytical techniques and their CAD applications Discusses new applications of printed antenna technology such as sensing Examines the state of design techniques of printed antenna Presents special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS

Download or read book Printed Antennas written by Binod Kumar Kanaujia and published by CRC Press. This book was released on 2020-11-22 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed antennas have become an integral part of next-generation wireless communications and have been found to be commonly used to improve system capacity, data rate, reliability, etc. This book covers theory, design techniques, and the chronological regression of the printed antennas for various applications. This book will provide readers with the basic conceptual knowledge about antennas along with advanced techniques for antenna design. It covers a variety of analytical techniques and their CAD applications and discusses new applications of printed antenna technology such as sensing. The authors also present special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS. The book will be useful to students as an introduction to design and applications of antennas. Additionally, experienced researchers in this field will find this book a ready reference and benefit from the techniques of research in printed antennas included in this book. Following are some of the salient features of this book: Covers a variety of analytical techniques and their CAD applications Discusses new applications of printed antenna technology such as sensing Examines the state of design techniques of printed antenna Presents special reconfigurable antennas such as ME dipole, polarization, feeding, and DGS

Download or read book Antenna Engineering Handbook written by John Volakis and published by McGraw Hill Professional. This book was released on 2018-11-05 with total page 1424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold-standard reference on the design and application of classic and modern antennas—fully updated to reflect the latest advances and technologiesThis new edition of the “bible of antenna engineering” has been updated to provide start-to-finish coverage of the latest innovations in antenna design and application. You will find in-depth discussion of antennas used in modern communication systems, mobile and personal wireless technologies, satellites, radar deployments, flexible electronics, and other emerging technologies, including 5G, terahertz, and wearable electronics. Antenna Engineering Handbook, Fifth Edition, is bolstered by real-world examples, hundreds of illustrations, and an emphasis on the practical aspects of antennas.Featuring 60 chapters and contributions from more than 80 renowned experts, this acclaimed resource is edited by one of the world’s leading antenna authorities. This edition features all of the classic antenna types, plus new and emerging designs, with 13 all-new chapters and important updates to nearly all chapters from past editions.Antenna Engineering Handbook, Fifth Edition, clearly explains cutting-edge applications in WLANs, automotive systems, PDAs, and handheld devices, making it an indispensable companion for today’s antenna practitioners and developers.Coverage includes:•Antenna basics and classic antennas•Design approaches for antennas and arrays•Wideband and multiband antennas•Antennas for mobile devices and PDAs, automotive applications, and aircraft•Base station and smart antennas•Beamforming and 5G antennas•Millimeter-wave and terahertz antennas•Flexible, wearable, thin film, origami, dielectric, and on-chip antennas•MIMO antennas and phased arrays•Direction-finding and GPS antennas•Active antennas•Low-profile wideband antennas•Nanoantennas•Reflectors and other satellite and radio-telescope antennas•Low-frequency, HF, VHF, UHF, ECM, and ESM antennas•Impedance-matching techniques and material characteristics•Metastructured and frequency selective surfaces•Propagation and guided structures•Computational techniques and toolsets•Indoor and outdoor measurements

Download or read book Microwave and Millimeter wave Antenna Design for 5G Smartphone Applications written by Wonbin Hong and published by John Wiley & Sons. This book was released on 2023-01-05 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth and practical coverage of design considerations for 5G antennas In Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications, two distinguished researchers deliver a holistic, multidisciplinary approach to antenna design methodologies. The book covers approaches ranging from sub-6GHz microwave to the millimeter-wave spectrum, explaining how microwave and millimeter-wave 5G antennas coexist and function, both independently and collaboratively. The book offers coverage of key considerations for designing millimeter-wave 5G antennas within space-constrained mobile devices, as well as practical concerns, like cost, fabrication yield, and heat dissipation. Readers will also find explorations of the likely future directions of 5G antenna evolution, as well as: A thorough introduction to basic concepts in 5G FR1 Band mobile antenna design, including discussions of antenna placement, element design, and topologies Comprehensive explorations of antenna feeding mechanisms and impedance matching, including chassis considerations and effects Practical discussions of frequency tunable millimeter-wave 5G antenna-in-package Fulsome treatments of compact millimeter-wave 5G antenna solutions and millimeter-wave antenna-on-display technologies for 5G mobile devices Perfect for antenna, microwave, communications, and radio-frequency engineers, Microwave and Millimeter-wave Antenna Design for 5G Smartphone Applications will also benefit graduate students, policymakers, regulators, and researchers with an interest in communications and antennas.

Download or read book Multiband Integrated Antennas for 4G Terminals written by David A. Sánchez-Hernández and published by Artech House. This book was released on 2008 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a comprehensive, one-stop resource, including in-depth coverage of multiband integrated antenna design, simulation, testing and manufacturing. This practical book helps you solve integration problems for ever-increasing multiband requirements. You find discussions on important considerations regarding future handset MIMO terminals, such as efficiency and the effect of the user. The book also shows you how to avoid tweaking for fractal multiband designs and printed dipole design.

Download or read book Printed Antennas for Future Generation Wireless Communication and Healthcare written by Balaka Biswas and published by CRC Press. This book was released on 2023-05-16 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proposed book focuses on the design and development of printed antennas along with modeling aspects for multifaceted applications. It further investigates imperfections in the manufacturing processes and assembly operation during the testing/characterization of printed antennas. This text- Discusses in a comprehensive manner the design and development aspects of printed antennas. Provides fractal engineering aspects for miniaturization and wideband characteristics of the low-profile antenna with high performances. Covers high gain printed antenna for Terahertz application. Showcases electrical modeling of smart antennas. Pedagogical features such as review questions based on practical experiences are included at the end of each chapter. The book comprehensively discusses fractal engineering in printed antennas for miniaturization and enhancement of performance factors. It further covers the modeling of electrically small antennas, circuit modeling, modeling of factual-based Ultra-Wide Band antennas, and modeling of reconfigurable micro-electromechanical system-based patch antennas. The book highlights performance metrics of multiple-input-multiple-output antennas. It will serve as an ideal reference text for senior undergraduate, graduate students, and academic researchers in fields including electrical engineering, electronics, communications engineering, and computer engineering.

Download or read book Multifunctional MIMO Antennas Fundamentals and Application written by Yadwinder Kumar and published by CRC Press. This book was released on 2022-05-19 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive approach to antenna designs for various applications, including 5G communication, the internet of things (IoT), and wearable devices. It discusses models, designs, and developments of MIMO antennas, antenna performance measurement, 5G communication challenges and opportunities, and MIMO antennas for LTE/ISM applications. It covers important topics including mmWave antennas, antenna arrays for MIMO applications, reconfigurable/band-notched MIMO antennas, multiband MIMO antennas, wideband MIMO antennas, and fractal-based compact multiband hybrid antennas. FEATURES Discusses antenna design optimization techniques in detail Covers MIMO antenna performance measurement, multiband MIMO antennas, and wideband MIMO antennas Discusses modeling, simulation, and specific absorption rate (SAR) analysis of antennas Provides applications including radio-frequency identification (RFID), wearable antennas, and antennas for IoT Multifunctional MIMO Antennas: Fundamentals and Application is useful for undergraduate and graduate students and academic researchers in areas including electrical engineering, electronics, and communication engineering.

Download or read book MIMO Antennas for Wireless Communication written by Leeladhar Malviya and published by CRC Press. This book was released on 2020-12-15 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desired objective of this book is to investigate diversity and mutual coupling effects on MIMO antenna designs for WLAN/WiMAX/LTE applications, controlled with diversity and ground modification techniques including equivalent circuit diagrams. Diversity techniques in MIMO antennas leading to the performance improvement ratings are demonstrated and deliberated. The book contributes towards the development of 2:1 VSWR MIMO antennas with diversity techniques for indoor/outdoor applications for high data rate, QOS, and SNR. The improved MIMO antenna structures are investigated and presented in this book including part of massive MIMO to provide the important aspects of emerging technology. Aimed at researchers, professionals and graduate students in electrical engineering, electromagnetics, communications and signal processing including antenna theory and design, smart antennas, communication systems, this book: Investigates real time MIMO antenna designs for WLAN/WiMAX/LTE applications. Covers effects of ECC, MEG, TARC, and equivalent circuit. Addresses the coupling and diversity aspects of antenna design problem for MIMO systems. Focus on the MIMO antenna designs for the real time applications. Exclusive chapter on 5G Massive MIMO along with case studies throughout the book.

Download or read book Smart Antennas written by Praveen Kumar Malik and published by Springer Nature. This book was released on 2022-02-03 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest techniques for the design of antenna, focusing specifically on the microstrip antenna. The authors discuss antenna structure, defected ground, MIMO, and fractal design. The book provides the design of microstrip antenna in terms of latest applications and uses in areas like IoT and device-to-device communication. The book also provides the current methods and techniques used for the enhancement of the performance parameters of the microstrip antenna. Chapters enhance the knowledge and skills of students and researchers in the latest in the communications world like IoT, D2D, satellite, wearable devices etc. The authors discuss applications such as microwave imaging, medical implants, hyperthermia treatments, and wireless wellness monitoring and how a decrease in size of antenna help facilitate application potential. Provides the latest techniques used for the design of antenna in terms of its structure, defected ground, MIMO and fractal design; Outlines steps to resolve issues with designing antenna, including the latest design and design parameters for microstrip antenna; Presents the design of conformal and miniaturized antenna structures for various applications.

Download or read book Modern Printed Circuit Antennas written by Hussain Al-Rizzo and published by BoD – Books on Demand. This book was released on 2020-10-28 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in-depth information on a variety of the latest developments in modern printed-circuit antennas written by several prominent authors in the field. This book consists of nine chapters covering a wide range of recent research topics. The topics covered include low-profile metamaterial-based adaptive beamforming techniques, high performance meta-surface antennas, fractal antennas, reconfigurable antennas for 5G systems operating at 60 GHz, radiation pattern synthesis of planar arrays using parasitic patches fed by a small number of active elements, decoupled and de-scattered monopole MIMO antenna arrays with orthogonal radiation patterns, ultra-wide band antennas with defected ground plane and microstrip line fed for Wi-Fi/Wi-Max/DCS/5G/satellite communications, and design, fabrication, and characterization of wearable textile antennas with high body-antenna isolation.

Download or read book Design and Applications of Active Integrated Antennas written by Mohammad S. Sharawi and published by Artech House. This book was released on 2018-05-31 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new resource guides professionals in the latest methods used when designing active integrated antennas (AIA) for wireless communication devices for various standards. This book provides complete design procedures for the various elements of such active integrated antennas such as the matching network, the amplifier/active element as well as the antenna. This book offers insight into how active integration and co-design between the active components (amplifier, oscillator, mixer, diodes) and the antenna can provide better power transfer, higher gains, increased efficiencies, switched beam patterns and smaller design footprints. It introduces the co-design approach of active integrated antennas and its superior performance over conventional methods. Complete design examples are given of active integrated antenna systems for narrow and wideband applications as well as for multiple-input-multiple-output (MIMO) systems. Readers find the latest design methods for narrow and broadband RF matching networks. This book provides a complete listing of performance metrics for active integrated antennas. The book serves as a complete reference and design guide in the area of AIA.