Download or read book Principles of Performance and Reliability Modeling and Evaluation written by Lance Fiondella and published by Springer. This book was released on 2016-04-06 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest key research into the performance and reliability aspects of dependable fault-tolerant systems and features commentary on the fields studied by Prof. Kishor S. Trivedi during his distinguished career. Analyzing system evaluation as a fundamental tenet in the design of modern systems, this book uses performance and dependability as common measures and covers novel ideas, methods, algorithms, techniques, and tools for the in-depth study of the performance and reliability aspects of dependable fault-tolerant systems. It identifies the current challenges that designers and practitioners must face in order to ensure the reliability, availability, and performance of systems, with special focus on their dynamic behaviors and dependencies, and provides system researchers, performance analysts, and practitioners with the tools to address these challenges in their work. With contributions from Prof. Trivedi's former PhD students and collaborators, many of whom are internationally recognized experts, to honor him on the occasion of his 70th birthday, this book serves as a valuable resource for all engineering disciplines, including electrical, computer, civil, mechanical, and industrial engineering as well as production and manufacturing.

Download or read book Systems Reliability Engineering written by Amit Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-05-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability is one of the fundamental criteria in engineering systems. Design and maintenance serve to support it throughout the systems life. As such, maintenance acts in parallel to production and can have a great impact on the availability and capacity of production and the quality of the products. The authors describe current and innovative methods useful to industry and society.

Download or read book Optimal Reliability Modeling written by Way Kuo and published by John Wiley & Sons. This book was released on 2003-02-17 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Promotes better ways to diagnose, maintain, and improve existing systems. Existing reliability evaluation models are examined with respect to today's complicated engineering systems that have hundreds of thousands of integrated component designs.

Download or read book Systems Modeling Methodologies and Tools written by Antonio Puliafito and published by Springer. This book was released on 2018-10-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers ideas, methods, algorithms, and tools for the in-depth study of the performance and reliability of dependable fault-tolerant systems. The chapters identify the current challenges that designers and practitioners must confront to ensure the reliability, availability, and performance of systems, with special focus on their dynamic behaviors and dependencies. Topics include network calculus, workload and scheduling; simulation, sensitivity analysis and applications; queuing networks analysis; clouds, federations and big data; and tools. This collection of recent research exposes system researchers, performance analysts, and practitioners to a spectrum of issues so that they can address these challenges in their work.

Download or read book Developments in Reliability Engineering written by Mangey Ram and published by Elsevier. This book was released on 2024-08-09 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern systems have become increasingly complex to design and build, while the demand for reliability and cost-effective enhancement continues. Robust international competition has further intensified the need for all designers, managers, practitioners, scientists, and engineers to ensure a level of reliability of their products and processes before release at the lowest cost. Developments in Reliability Engineering equips its audience with the necessary information to keep up with the latest original research and state-of-the-art advances in reliability engineering. The volume offers an excursus from historical theories and methods to the present-world practical utility of these concepts with worked-out examples. - Guides readers through reliability topics from an historical perspective to new research results, advancements, and latest developments - Draws on the authors' experience of reliability analysis in a range of industries and disciplines, showing the need for reliability from the product design stage right through to aftercare - Provides methods throughout, making this title a good source of actionable information

Download or read book New Technologies Development and Application III written by Isak Karabegović and published by Springer Nature. This book was released on 2020-05-04 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book features papers presented at the International Conference on New Technologies, Development and Application, held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo on 25th–27th June 2020. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in Industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control; energy and renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems; smart grids; nonlinear systems; power; social and economic systems; education; and IoT. The book focuses on the Fourth Industrial Revolution “Industry 4.0,” in which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.

Download or read book Reasoning Web Explainable Artificial Intelligence written by Markus Krötzsch and published by Springer Nature. This book was released on 2019-09-17 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains lecture notes of the 15th Reasoning Web Summer School (RW 2019), held in Bolzano, Italy, in September 2019. The research areas of Semantic Web, Linked Data, and Knowledge Graphs have recently received a lot of attention in academia and industry. Since its inception in 2001, the Semantic Web has aimed at enriching the existing Web with meta-data and processing methods, so as to provide Web-based systems with intelligent capabilities such as context awareness and decision support. The Semantic Web vision has been driving many community efforts which have invested a lot of resources in developing vocabularies and ontologies for annotating their resources semantically. Besides ontologies, rules have long been a central part of the Semantic Web framework and are available as one of its fundamental representation tools, with logic serving as a unifying foundation. Linked Data is a related research area which studies how one can make RDF data available on the Web and interconnect it with other data with the aim of increasing its value for everybody. Knowledge Graphs have been shown useful not only for Web search (as demonstrated by Google, Bing, etc.) but also in many application domains.

Download or read book Performance Reliability and Availability Evaluation of Computational Systems Volume I written by Paulo Romero Martins Maciel and published by CRC Press. This book was released on 2023-03-06 with total page 3068 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook intends to be a comprehensive and substantially self-contained two-volume book covering performance, reliability, and availability evaluation subjects. The volumes focus on computing systems, although the methods may also be applied to other systems. The first volume covers Chapter 1 to Chapter 14, whose subtitle is ``Performance Modeling and Background". The second volume encompasses Chapter 15 to Chapter 25 and has the subtitle ``Reliability and Availability Modeling, Measuring and Workload, and Lifetime Data Analysis". This text is helpful for computer performance professionals for supporting planning, design, configuring, and tuning the performance, reliability, and availability of computing systems. Such professionals may use these volumes to get acquainted with specific subjects by looking at the particular chapters. Many examples in the textbook on computing systems will help them understand the concepts covered in each chapter. The text may also be helpful for the instructor who teaches performance, reliability, and availability evaluation subjects. Many possible threads could be configured according to the interest of the audience and the duration of the course. Chapter 1 presents a good number of possible courses programs that could be organized using this text. Volume I is composed of the first two parts, besides Chapter 1. Part I gives the knowledge required for the subsequent parts of the text. This part includes six chapters. It covers an introduction to probability, descriptive statistics and exploratory data analysis, random variables, moments, covariance, some helpful discrete and continuous random variables, Taylor series, inference methods, distribution fitting, regression, interpolation, data scaling, distance measures, and some clustering methods. Part II presents methods for performance evaluation modeling, such as operational analysis, Discrete-Time Markov Chains (DTMC), and Continuous Time Markov Chains (CTMC), Markovian queues, Stochastic Petri nets (SPN), and discrete event simulation.

Download or read book Performance Reliability and Availability Evaluation of Computational Systems Volume 2 written by Paulo Romero Martins Maciel and published by CRC Press. This book was released on 2023-03-06 with total page 2159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook intends to be a comprehensive and substantially self-contained two-volume book covering performance, reliability, and availability evaluation subjects. The volumes focus on computing systems, although the methods may also be applied to other systems. The first volume covers Chapter 1 to Chapter 14, whose subtitle is ``Performance Modeling and Background". The second volume encompasses Chapter 15 to Chapter 25 and has the subtitle ``Reliability and Availability Modeling, Measuring and Workload, and Lifetime Data Analysis". This text is helpful for computer performance professionals for supporting planning, design, configuring, and tuning the performance, reliability, and availability of computing systems. Such professionals may use these volumes to get acquainted with specific subjects by looking at the particular chapters. Many examples in the textbook on computing systems will help them understand the concepts covered in each chapter. The text may also be helpful for the instructor who teaches performance, reliability, and availability evaluation subjects. Many possible threads could be configured according to the interest of the audience and the duration of the course. Chapter 1 presents a good number of possible courses programs that could be organized using this text. Volume II is composed of the last two parts. Part III examines reliability and availability modeling by covering a set of fundamental notions, definitions, redundancy procedures, and modeling methods such as Reliability Block Diagrams (RBD) and Fault Trees (FT) with the respective evaluation methods, adopts Markov chains, Stochastic Petri nets and even hierarchical and heterogeneous modeling to represent more complex systems. Part IV discusses performance measurements and reliability data analysis. It first depicts some basic measuring mechanisms applied in computer systems, then discusses workload generation. After, we examine failure monitoring and fault injection, and finally, we discuss a set of techniques for reliability and maintainability data analysis.

Download or read book Reliability Principles and Practices written by S. R. Calabro and published by . This book was released on 1962 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reliability Modeling The RIAC Guide to Reliability Prediction Assessment and Estimation written by William Denson and published by RIAC. This book was released on 2006 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book is to provide guidance on modeling techniques that can be used to quantify the reliability of a product or system. In this context, reliability modeling is the process of constructing a mathematical model that is used to estimate the reliability characteristics of a product. There are many ways in which this can be accomplished, depending on the product or system and the type of information that is available, or practical to obtain. This book reviews possible approaches, summarizes their advantages and disadvantages, and provides guidance on selecting a methodology based on the specific goals and constraints of the analyst. While this book will not discuss the use of specific published methodologies, in cases where examples are provided, tools and methodologies with which the author has personal experience in their development are used, such as life modeling, NPRD, MIL-HDBK-217 and the RIAC 217Plus--Introduction.

Download or read book Software Reliability written by Glenford J. Myers and published by . This book was released on 1976-10-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals constructively with recognized software problems. Focuses on the unreliability of computer programs and offers state-of-the-art solutions. Covers—software development, software testing, structured programming, composite design, language design, proofs of program correctness, and mathematical reliability models. Written in an informal style for anyone whose work is affected by the unreliability of software. Examples illustrate key ideas, over 180 references.

Download or read book 6GN for Future Wireless Networks written by Jingchao Li and published by Springer Nature. This book was released on with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Reliability Modeling written by Shigeru Yamada and published by Springer Science & Business Media. This book was released on 2013-10-24 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software reliability is one of the most important characteristics of software product quality. Its measurement and management technologies during the software product life cycle are essential to produce and maintain quality/reliable software systems. Part 1 of this book introduces several aspects of software reliability modeling and its applications. Hazard rate and nonhomogeneous Poisson process (NHPP) models are investigated particularly for quantitative software reliability assessment. Further, imperfect debugging and software availability models are discussed with reference to incorporating practical factors of dynamic software behavior. Three software management problems are presented as application technologies of software reliability models: the optimal software release problem, the statistical testing-progress control, and the optimal testing-effort allocation problem. Part 2 of the book describes several recent developments in software reliability modeling and their applications as quantitative techniques for software quality/reliability measurement and assessment. The discussion includes a quality engineering analysis of human factors affecting software reliability during the design review phase, which is the upper stream of software development, as well as software reliability growth models based on stochastic differential equations and discrete calculus during the testing phase, which is the lower stream. The final part of the book provides an illustration of quality-oriented software management analysis by applying the multivariate analysis method and the existing software reliability growth models to actual process monitoring data.

Download or read book Reliability Modeling Analysis And Optimization written by Hoang Pham and published by World Scientific. This book was released on 2006-06-26 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: As our modern information-age society grows in complexity both in terms of embedded systems and applications, the problems and challenges in reliability become ever more complex. Bringing together many of the leading experts in the field, this volume presents a broad picture of current research on system modeling and optimization in reliability and its applications.The book comprises twenty-three chapters organized into four parts: Reliability Modeling, Software Quality Engineering, Software Reliability, and Maintenance and Inspection Policies. These sections cover a wide range of important topics, including system reliability modeling, optimization, software reliability and quality, maintenance theory and inspection, reliability failure analysis, sampling plans and schemes, software development processes and improvement, stochastic process modeling, statistical distributions and analysis, fault-tolerant performance, software measurements and cost effectiveness, queueing theory and applications, system availability, reliability of repairable systems, testing sampling inspection, software capability maturity model, accelerated life modeling, statistical control, and HALT testing.

Download or read book Theory and Practice of Quality and Reliability Engineering in Asia Industry written by Cher Ming Tan and published by Springer. This book was released on 2017-01-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the application of quality and reliability engineering in Asian industries, and offers information for multinational companies (MNC) looking to transfer some of their operation and manufacturing capabilities to Asia and at the same time maintain high levels of reliability and quality. It is also provides small and medium enterprises (SME) in Asia with insights into producing high-quality and reliable products. It mainly comprises peer-reviewed papers that were presented at the Asian Network for Quality (ANQ) Congress 2014 held in Singapore (August, 2014), which provides a platform for companies, especially those within Asia where rapid changes and growth in manufacturing are taking place, to present their quality and reliability practices. The book presents practical demonstrations of how quality and reliability methodologies can be modified for the unique Asian market, and as such is a valuable resource for students, academics, professionals and practitioners in the field of quality and reliability.

Download or read book Product Reliability Maintainability and Supportability Handbook written by Michael Pecht and published by CRC Press. This book was released on 1995-05-04 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique publication addresses the role of reliability, maintainability, and supportability in the life-cycle of a product, in the context of product effectiveness and worth. It emphasizes all aspects of producing an effective electrical or mechanical system. This is the only handbook available on this subject and the only book that is this comprehensive and informative. The Product Reliability, Maintainability, and Supportability Handbook examines the logistics, cost, and the physics of failure-topics never before found in a single volume on reliability. It describes the factors that affect product effectiveness and worth: performance, reliability, design effectiveness and margin for error, availability, affordability, use effectiveness, and logistic effectiveness. The handbook contains 13 in-depth chapters, opening with an introduction on product effectiveness and worth and concluding with reliability and maintainability data that can be combined with performance data to assess overall effectiveness of the product. The pages are filled with valuable information that can be easily and quickly put to practical use. Basic principles of the mathematical theory of probability and necessary background are provided. Concepts and basic theory of reliability in terms of probability and statistical inference are also given. Techniques for deriving probabilistic models from observational data as well as reliability models and associated validation techniques are detailed. Software and software reliability, quality, and safety are all covered, including the development life-cycle process and mechanisms by which software errors are introduced. The book presents design guidelines and techniques and the requirements for materials, manufacturing, and assembly. Learn how to analyze the reliability of redundant and fault-tolerant products. Use the methods for modeling and analyzing failures of repairable products that normally exhibit wearout characteristics. The Product Reliability, Maintainability, and Supportability Handbook also provides reliability improvement techniques to improve the competitiveness of existing products. The book includes helpful summaries and numerous problem sections to reinforce and test learned information. This reference source is the guide that professionals and technical managers should turn to when they need a comprehensive and detailed overview of everything that goes into producing systems and products that meet customer needs in an effective and timely manner.