Download or read book Principles and Applications of Vector Network Analyzer Calibration Techniques written by J. Apolinar Reynoso Hernández and published by CRC Press. This book was released on 2024-12-19 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the work developed over more than two decades in the field of advanced calibration techniques for vector network analyzers, by the RF and Microwave Group at The Center for Scientific Research and Higher Education of Ensenada, Baja California, Mexico, which is led by Dr. J. Apolinar Reynoso-Hernández, author of this book. This book is written so that every electrical engineer, with knowledge of electrical circuits and linear algebra basics, can understand the principles of VNA calibration techniques. Vector network analyzers are normally used by engineers and researchers working in the RF and microwave field, which usually requires advanced and specialized courses at graduate level. The reader should be able to implement any VNA calibration technique, decide the most adequate calibration for a given measurement condition, and interpret the measurement results, as a seasoned RF metrology expert. Principles and Applications of Vector Network Analyzer Calibration Techniques is a useful book for beginners and professionals working on • Microwave de-embedding and test fixture characterization • Characterization of uniform transmission lines • Load-pull measurements. It is also: • An ideal tutorial for professionals and postgraduate/research stu-dents taking courses in microwave calibration techniques. • A useful textbook for practicing electronics engineering and researchers working in the RF microwave field: calibration techniques and load-pull measurements.
Download or read book Principles and Applications of Vector Network Analyzer Calibration Techniques written by J Apolinar Reynoso Hernández and published by . This book was released on 2024-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes more than two decades of work on advanced calibration techniques for vector network analyzers (VNA) and is written so every electrical engineer with knowledge of electrical circuits and linear algebra basics can understand the principles of VNA calibration techniques.
Download or read book Fundamentals of Vector Network Analysis written by Michael Hiebel and published by . This book was released on 2007 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sub Terahertz Sensing Technology for Biomedical Applications written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-08-20 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the readers an opportunity to acquire the concepts of artificial intelligence (AI) enabled sub-THz systems for novel applications in the biomedical field. The readers will also be inspired to contextualize these applications for solving real life problems such as non-invasive glucose monitoring systems, cancer detection and dental imaging. The introductory section of this book focuses on existing technologies for radio frequency and infrared sensing in biomedical applications, and their limited use in sensing applications, as well as the advantages of using THz technology in this context. This is followed by a detailed comparative analysis of THz electronics technology and other conventional electro optic THz setups highlighting the superior efficiency, affordability and portability of electronics-based THz systems. The book also discusses electronic sub-THz measurement systems for different biomedical applications. The chapters elucidate two major applications where sub-THz provides an edge over existing state of the art techniques used for non-invasive measurement of blood glucose levels and intraoperative assessment of tumor margins. There is a detailed articulation of an application of leveraging machine learning for measurement systems for non-invasive glucose concentration measurement. This helps the reader relate to the output in a more user-friendly format and understand the possible use cases in a more lucid manner. The book is intended to help the reader learn how to build tissue phantoms and characterize them at sub-THz frequencies in order to test the measurement systems. Towards the end of the book, a brief introduction to system automation for biomedical imaging is provided as well for quick analysis of the data. The book will empower the reader to understand and appreciate the immense possibilities of using electronic THz systems in the biomedical field, creating gateways for fueling further research in this area.
Download or read book Terahertz Metrology written by Mira Naftaly and published by Artech House. This book was released on 2015-01-01 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book describes modern terahertz (THz) systems and devices and presents practical techniques for accurate measurement with an emphasis on evaluating uncertainties and identifying sources of error. This is the first THz book on the market to address measurement methodologies and issues -- perfect for practitioners and aspiring practitioners wishing to learn good measurement practice and avoid pitfalls. This book provides a brief review of different THz systems and devices, followed by chapters detailing the measurement issues encountered in using each of the main types of THz systems, and a guide to performing measurements rigorously. Particular attention is given to evaluating uncertainties, and recognizing potential sources of errors. The main focus is on time-domain spectroscopy, by far the most widely used technique. Readers are also presented with examples of applications with the emphasis on utility, both in research and in industry.
Download or read book The RF and Microwave Handbook 3 Volume Set written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 2208 pages. Available in PDF, EPUB and Kindle. Book excerpt: By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.
Download or read book RF and Microwave Circuits Measurements and Modeling written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the challenges RF and microwave circuit designers face in their day-to-day tasks, RF and Microwave Circuits, Measurements, and Modeling explores RF and microwave circuit designs in terms of performance and critical design specifications. The book discusses transmitters and receivers first in terms of functional circuit block and then examines each block individually. Separate articles consider fundamental amplifier issues, low noise amplifiers, power amplifiers for handset applications and high power, power amplifiers. Additional chapters cover other circuit functions including oscillators, mixers, modulators, phase locked loops, filters and multiplexers. New chapters discuss high-power PAs, bit error rate testing, and nonlinear modeling of heterojunction bipolar transistors, while other chapters feature new and updated material that reflects recent progress in such areas as high-volume testing, transmitters and receivers, and CAD tools. The unique behavior and requirements associated with RF and microwave systems establishes a need for unique and complex models and simulation tools. The required toolset for a microwave circuit designer includes unique device models, both 2D and 3D electromagnetic simulators, as well as frequency domain based small signal and large signal circuit and system simulators. This unique suite of tools requires a design procedure that is also distinctive. This book examines not only the distinct design tools of the microwave circuit designer, but also the design procedures that must be followed to use them effectively.
Download or read book Modern RF and Microwave Measurement Techniques written by Valeria Teppati and published by Cambridge University Press. This book was released on 2013-06-20 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive, hands-on review of the most up-to-date techniques in RF and microwave measurement, including practical advice on deployment challenges.
Download or read book The VNA Applications Handbook written by Gregory Bonaguide and published by Artech House. This book was released on 2019-09-30 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by prominent experts in the field, this authoritative new resource provides guidelines for performing a wide variety of Vector Network Analyzers (VNA) measurements. The capabilities and limitations of modern VNA in the context of challenging real-world applications are explained, as well as insights for optimizing test setups and instrument settings, making accurate measurements and, equally important, avoiding costly mistakes. Organized by topic, the readers can focus on chapters covering particular measurement challenges. Application topics include linear and non-linear measurements of passive and active devices, frequency converting devices, and special considerations for high-power, high-gain, and pulsed devices. Signal Integrity and time-domain reflectometry are covered, as well as emerging applications at millimeter-wave frequencies driven by 5G and automotive radar. Waveguide is presented, with emphasis on understanding guided-wave propagation and the associated calculations required for creating calibration standards. Each application is supported by illustrations that help explain key concepts and VNA screenshots are used to show both expected and, in some cases, unexpected results. This book equips engineers and lab technicians to better understand these important instruments, and effectively use them to develop the technologies that drive our world.
Download or read book Principles of Terahertz Time Domain Spectroscopy written by Jean-Louis Coutaz and published by CRC Press. This book was released on 2018-12-07 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terahertz time-domain spectroscopy (THz-TDS) is a unique technique for characterizing the response of materials and devices in the far-infrared region of the electromagnetic spectrum. Based on the measurement of transmitted or reflected ultra-short electromagnetic pulses and on a Fourier-transform of the recorded waveforms, THz-TDS permits fast and precise determination of the permittivity or permeability of materials over a wide bandwidth. This book is devoted to the determination of this spectral response of samples from the recorded waveforms.
Download or read book Handbook of Microwave Component Measurements written by Joel P. Dunsmore and published by John Wiley & Sons. This book was released on 2012-08-15 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art coverage for making measurements on RF and Microwave Components, both active and passive. A perfect reference for R&D and Test Engineers, with topics ranging from the best practices for basic measurements, to an in-depth analysis of errors, correction methods, and uncertainty analysis, this book provides everything you need to understand microwave measurements. With primary focus on active and passive measurements using a Vector Network Analyzer, these techniques and analysis are equally applicable to measurements made with Spectrum Analyzers or Noise Figure Analyzers. The early chapters provide a theoretical basis for measurements complete with extensive definitions and descriptions of component characteristics and measurement parameters. The latter chapters give detailed examples for cases of cable, connector and filter measurements; low noise, high-gain and high power amplifier measurements, a wide range of mixer and frequency converter measurements, and a full examination of fixturing, de-embedding, balanced measurements and calibration techniques. The chapter on time-domain theory and measurements is the most complete treatment on the subject yet presented, with details of the underlying mathematics and new material on time domain gating. As the inventor of many of the methods presented, and with 30 years as a development engineer on the most modern measurement platforms, the author presents unique insights into the understanding of modern measurement theory. Key Features: Explains the interactions between the device-under-test (DUT) and the measuring equipment by demonstrating the best practices for ascertaining the true nature of the DUT, and optimizing the time to set up and measure Offers a detailed explanation of algorithms and mathematics behind measurements and error correction Provides numerous illustrations (e.g. block-diagrams for circuit connections and measurement setups) and practical examples on real-world devices, which can provide immediate benefit to the reader Written by the principle developer and designer of many of the measurement methods described This book will be an invaluable guide for RF and microwave R&D and test engineers, satellite test engineers, radar engineers, power amplifier designers, LNA designers, and mixer designers. University researchers and graduate students in microwave design and test will also find this book of interest.
Download or read book Radio Frequency Heating in Food Processing written by George B. Awuah and published by CRC Press. This book was released on 2014-12-04 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-Frequency Heating in Food Processing: Principles and Applications covers the fundamentals of radio-frequency (RF) heating and the use of RF-heating technologies in modern food processing, preservation, and related industries. Focusing on industrial and lab-scale applications where RF heating has been employed successfully or reported to have potential benefits over conventional heating options, this state-of-the-art reference: Explains the similarities, differences, advantages, and limitations of RF and microwave heating as applied to agricultural products Describes fiber-optics temperature sensors and their utility in monitoring temperature during RF and microwave heating Discusses the dielectric and thermo-physical properties of agricultural products amenable to RF and microwave heating, presenting measurement techniques, mathematical concepts, and computer simulation models Provides practical perspectives on industrial RF units used in manufacturing food products, addressing free-running oscillators and 50-Ω designs for RF heaters and applicators Uses finite-element formulations to determine design parameters including resonant modes, circuit impedance, and electric field distribution in RF applicators Examines RF-heating effects on microorganisms, enzymes, and food quality attributes for products such as poultry, beef, pork, eggs, fish, milk, fruits, vegetables, and seafood Explores RF-heating applications beyond food processing, such as agricultural product deinfestation, waste treatment, counterfeit prevention, package tracking, and transportation of food from farm to table Radio-Frequency Heating in Food Processing: Principles and Applications supplies an in-depth overview of the fundamental science and engineering principles governing RF applications, as well as a solid understanding of industrial RF unit design options, challenges, and opportunities for development.
Download or read book NIST Handbook written by and published by . This book was released on 1989 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cmos Rf Modeling Characterization And Applications written by M Jamal Deen and published by World Scientific. This book was released on 2002-04-10 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 µm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.
Download or read book Microwave De embedding written by Giovanni Crupi and published by Academic Press. This book was released on 2013-11-09 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This groundbreaking book is the first to give an introduction to microwave de-embedding, showing how it is the cornerstone for waveform engineering. The authors of each chapter clearly explain the theoretical concepts, providing a foundation that supports linear and non-linear measurements, modelling and circuit design. Recent developments and future trends in the field are covered throughout, including successful strategies for low-noise and power amplifier design. This book is a must-have for those wishing to understand the full potential of the microwave de-embedding concept to achieve successful results in the areas of measurements, modelling, and design at high frequencies. With this book you will learn: - The theoretical background of high-frequency de-embedding for measurements, modelling, and design - Details on applying the de-embedding concept to the transistor's linear, non-linear, and noise behaviour - The impact of de-embedding on low-noise and power amplifier design - The recent advances and future trends in the field of high-frequency de-embedding - Presents the theory and practice of microwave de-embedding, from the basic principles to recent advances and future trends - Written by experts in the field, all of whom are leading researchers in the area - Each chapter describes theoretical background and gives experimental results and practical applications - Includes forewords by Giovanni Ghione and Stephen Maas
Download or read book China Satellite Navigation Conference CSNC 2012 Proceedings written by Jiadong Sun and published by Springer Science & Business Media. This book was released on 2012-04-05 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the 3rd China Satellite Navigation Conference (CSNC2012) presents selected research papers from CSNC2012, held on 15-19 May in Guanzhou, China. These papers discuss the technologies and applications of the Global Navigation Satellite System (GNSS), and the latest progress made in the China BeiDou system especially. They are divided into 9 topics to match the corresponding sessions in CSNC2012, which broadly covered key topics in GNSS. Readers can learn about the BeiDou system and keep abreast of the latest advances in GNSS techniques and applications. SUN Jiadong is the Chief Designer of the Compass/BeiDou system, and the Academician of Chinese Academy of Sciences; LIU Jingnan is a professor at Wuhan University, and the Academician of Chinese Academy of Engineering; YANG Yuanxi is a professor at China National Administration of GNSS and Applications, and the Academician of Chinese Academy of Sciences; FAN Shiwei is a researcher on satellite navigation.
Download or read book Wiley Survey of Instrumentation and Measurement written by Stephen A. Dyer and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-depth coverage of instrumentation and measurement from the Wiley Encyclopedia of Electrical and Electronics Engineering The Wiley Survey of Instrumentation and Measurement features 97 articles selected from the Wiley Encyclopedia of Electrical and Electronics Engineering, the one truly indispensable reference for electrical engineers. Together, these articles provide authoritative coverage of the important topic of instrumentation and measurement. This collection also, for the first time, makes this information available to those who do not have access to the full 24-volume encyclopedia. The entire encyclopedia is available online-visit www.interscience.wiley.com/EEEE for more details. Articles are grouped under sections devoted to the major topics in instrumentation and measurement, including: * Sensors and transducers * Signal conditioning * General-purpose instrumentation and measurement * Electrical variables * Electromagnetic variables * Mechanical variables * Time, frequency, and phase * Noise and distortion * Power and energy * Instrumentation for chemistry and physics * Interferometers and spectrometers * Microscopy * Data acquisition and recording * Testing methods The articles collected here provide broad coverage of this important subject and make the Wiley Survey of Instrumentation and Measurement a vital resource for researchers and practitioners alike
