Download or read book Principles and Applications of Thermal Analysis written by Paul Gabbott and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis techniques are used in a wide range of disciplines, from pharmacy and foods to polymer science, materials and glasses; in fact any field where changes in sample behaviour are observed under controlled heating or controlled cooling conditions. The wide range of measurements possible provide fundamental information on the material properties of the system under test, so thermal analysis has found increasing use both in basic characterisation of materials and in a wide range of applications in research, development and quality control in industry and academia. Principles and Applications of Thermal Analysis is written by manufacturers and experienced users of thermal techniques. It provides the reader with sound practical instruction on how to use the techniques and gives an up to date account of the principle industrial applications. By covering basic thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) including the new approach of Fast Scanning DSC, together with dynamic mechanical analysis (DMA /TMA) methods, then developing the discussion to encompass industrial applications, the book serves as an ideal introduction to the technology for new users. With a strong focus on practical issues and relating the measurements to the physical behaviour of the materials under test, the book will also serve as an important reference for experienced analysts.
Download or read book Thermal Methods of Analysis written by P.J. Haines and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wide range of applications of thermal methods of analysis in measuring physical properties, studying chemical reactions and determining the thermal behaviour of samples is of interest to academics and to industry. These applications prompted the writing of this book, in the hope that the descriptions, explanations and examples given would be of help to the analyst and would stimulate the investigation of other thermal techniques. Thermal studies are a fascinating means of examining the samples and the problems brought to us by colleagues, students and clients. If time allows, watching crystals change on a hot-stage microscope, or measuring the properties and changes on a DSC or TG or any thermal instrument can be a rewarding activity, besides providing valuable analytical information. This book started from a series of lectures delivered at Kingston University and at meetings of the Thermal Methods Group of the United Kingdom. The collaboration and information supplied to all the contribu tors by colleagues and instrument manufacturers is most gratefully ack nowledged, as are the valuable contributions made at meetings of the International Confederation for Thermal Analysis and Calorimetry (ICT AC) and at the European Symposia on Thermal Analysis and Calorimetry (ESTAC).
Download or read book Principles of Thermal Analysis and Calorimetry written by Simon Gaisford and published by Royal Society of Chemistry. This book was released on 2019-03-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of thermal and calorimetric methods has shown rapid growth over the past few decades, in an increasingly wide range of applications. The original text was published in 2001; since then there have been significant advances in various analytical techniques and their applications. This second edition supplies an up to date, concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Written by experts in their field, brief accounts of the basic theory are reinforced with detailed technical advances and contemporary developments. Where appropriate, applications are used to highlight particular operating principles or methods of interpretation. As an important source of information for many levels of readership in a variety of areas, this book will be an aid for students and lecturers through to industrial and laboratory staff and consultants.
Download or read book Principles of Thermal Analysis and Calorimetry written by Peter J. Haines and published by Royal Society of Chemistry. This book was released on 2002 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of thermal and calorimetric methods has shown rapid growth over the last two decades, in an increasingly wide range of applications. In addition, a number of powerful new techniques have been developed. This book supplies a concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Brief accounts of the basic theory are reinforced with detailed applications of the methods and contemporary developments. Also included is information on standard test methods and manufacturers. Written by acknowledged experts, Principles of Thermal Analysis and Calorimetry is up-to-date, wide-ranging and practical. It will be an important source of information for many levels of readership in a variety of areas, from students and lecturers through to industrial and laboratory staff and consultants.
Download or read book Thermal Analysis written by El-Zeiny Ebeid and published by Elsevier. This book was released on 2021-06-23 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis: From Introductory Fundamentals to Advanced Applications presents an easy-to-understand introduction to Thermal Analysis (TA) principles alongside in-depth coverage of the wide variety of techniques currently in use across several industries. It covers differential scanning calorimetry (DSC), temperature modulated DSC (TMDSC), differential thermal analysis (DTA), thermogravimetry (TG) or thermogravimetric analysis (TGA), thermomechanical analysis (TMA), differential photo-calorimetry (DPC), dynamic mechanical analysis (DMA), thermodilatometry (TD), dielectric thermal analysis (DEA), thermally-stimulated current (TSC), emanation thermal analysis (ETA), thermoluminescence (TL), fast scanning calorimetry (FSC), and microcalorimetry. Chapters define the various TA techniques, report the Temperature-Modulated DSC (TMDSC) method and its applications, especially its use for studying the thermodynamic properties of polymers and pharmaceuticals, focus on the potential of TA in materials science with applications in chemistry and engineering, demonstrate, in detail, the various applications of TA in food, electronic industries, solid-state reactions, chemistry of polymers and large directing agents, kinetic studies, demonstrate the crystal structure and phase changes occurring upon heating by TA, and the potential of TA in recycling and waste management. Gives a solid introduction to the scientific principles of TA for those who are new to these techniques or need a deeper understanding Illustrates concepts with more than 100 schematic and analysis curves, several flow charts, process diagrams and photographs Contains chapters that cover the user of TA in materials science and crystal structures
Download or read book Thermal Analysis of Polymers written by Joseph D. Menczel and published by John Wiley & Sons. This book was released on 2014-07-09 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a solid introduction to thermal analysis, methods, instrumentation, calibration, and application along with the necessary theoretical background. Useful to chemists, physicists, materials scientists, and engineers who are new to thermal analysis techniques, and to existing users of thermal analysis who wish expand their experience to new techniques and applications Topics covered include Differential Scanning Calorimetry and Differential Thermal Analysis (DSC/DTA), Thermogravimetry, Thermomechanical Analysis and Dilatometry, Dynamic Mechanical Analysis, Micro-Thermal Analysis, Hot Stage Microscopy, and Instrumentation. Written by experts in the various areas of thermal analysis Relevant and detailed experiments and examples follow each chapter.
Download or read book Thermal Analysis of Pharmaceuticals written by Duncan Q.M. Craig and published by CRC Press. This book was released on 2006-12-21 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a result of the Process Analytical Technologies (PAT) initiative launched by the U.S. Food and Drug Administration (FDA), analytical development is receiving more attention within the pharmaceutical industry. Illustrating the importance of analytical methodologies, Thermal Analysis of Pharmaceuticals presents reliable and versatile charac
Download or read book Thermal Analysis written by Bernhard Wunderlich and published by Elsevier. This book was released on 2012-12-02 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis deals with the theories of thermal analysis (thermodynamics, irreversible thermodynamics, and kinetics) as well as instrumentation and techniques (thermometry, differential thermal analysis, calorimetry, thermomechanical analysis and dilatometry, and thermogravimetry). Applications of thermal analysis are also described. This book consists of seven chapters and begins with a brief outline of the history and meaning of heat and temperature before listing the techniques of thermal analysis. The reader is then introduced to the basis of thermal analysis, paying particular attention to the macroscopic theories of matter, namely, equilibrium thermodynamics, irreversible thermodynamics, and kinetics. The next chapter discusses thermometry, focusing on the international temperature scale and the techniques of measuring temperature. Examples of heating and cooling curves are linked to the discussion of transitions. The groundwork for a detailed understanding of transition temperature is given. The chapters that follow explore the principles of differential thermal analysis, calorimetry, thermomechanical analysis and dilatometry, and thermogravimetry. This book is intended for the senior undergraduate or beginning graduate student, as well as for the researcher and teacher interested in thermal analysis.
Download or read book Handbook of Thermal Analysis and Calorimetry written by Michael E. Brown and published by Elsevier. This book was released on 1998-09-07 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry, Volume 1: Principles and Practice describes the basic background information common to thermal analysis and calorimetry in general. Thermodynamic and kinetic principles are discussed along with the instrumentation and methodology associated with thermoanalytical and calorimetric techniques. The purpose is to collect the discussion of these general principles and minimize redundancies in the subsequent volumes that are concerned with the applications of these principles and methods. More unique methods, which pertain to specific processes or materials, are covered in later volumes.
Download or read book Principles of Thermal Analysis and Calorimetry written by Peter Haines and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of thermal and calorimetric methods has shown rapid growth over the last two decades, in an increasingly wide range of applications. In addition, a number of powerful new techniques have been developed. This book supplies a concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Brief accounts of the basic theory are reinforced with detailed applications of the methods and contemporary developments. Also included is information on standard test methods and manufacturers. Written by acknowledged experts, Principles of Thermal Analysis and Calorimetry is up-to-date, wide-ranging and practical. It will be an important source of information for many levels of readership in a variety of areas, from students and lecturers through to industrial and laboratory staff and consultants.
Download or read book Introduction to Thermal Analysis written by M.E. Brown and published by Springer Science & Business Media. This book was released on 2006-01-10 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: to Thermal Analysis Techniques and Applications Edited by Michael E. Brown Chemistry Department, Rhodes University, Grahamstown, South Africa KLUWER ACADEMIC PUBLISHERS NEW YORK, BOSTON, DORDRECHT, LONDON, MOSCOW eBook ISBN: 0-306-48404-8 Print ISBN: 1-4020-0472-9 ©2004 Kluwer Academic Publishers New York, Boston, Dordrecht, London, Moscow Print ©2001 Kluwer Academic Publishers Dordrecht All rights reserved No part of this eBook may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without written consent from the Publisher Created in the United States of America Visit Kluwer Online at: http://kluweronline. com and Kluwer's eBookstore at: http://ebooks. kluweronline. com CONTENTS Preface to the First Edition, Chapman & Hall, London, 1988 ix About the First Edition of this Book x Preface to the Second Edition xi 1. INTRODUCTION 1. 1 Definition and History 1 1. 2 Thermal Analysis Instruments 4 References 11 2. THERMAL EVENTS 2. 1 Introduction 13 2. 2 The Solid State 13 2. 3 Reactions of Solids 14 2. 4 Decomposition of Solids 15 2. 5 Reaction with the Surrounding Atmosphere 16 2. 6 Solid-Solid Interactions 16 References 17 3. THERMOGRAVIMETRY (TG) Introduction 3. 1 19 3. 2 The Balance 19 3. 3 Heating the Sample 21 3. 4 The Atmosphere 24 3. 5 The Sample 26 3. 6 Temperature Measurement 26 3. 7 Temperature Control 28 Sample Controlled Thermal Analysis (SCTA) 29 3. 8 3. 9 Calibration 36 3. 10 Presentation of TG Data 37 3.
Download or read book Introduction to Thermal Analysis written by M.E. Brown and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is, as its title suggests, to help sOilleone with little or no knowledge of what thermal analysis can do, to find out briefly what the subject is all about, to decide whether it will be of use to him or her, and to help in getting started on the more common techniques. Some of the less-common techniques are mentioned, but more specialized texts should be consulted before venturing into these areas. This book arose out of a set of notes prepared for courses on thermal analysis given at instrument workshops organized by'the S.A. Chemical Institute. It has also been useful for similar short courses given at various universities and technikons. I have made extensive use ofthe manufacturers' literature, and I am grateful to them for this information. A wide variety of applications has been drawn from the literature to use as examples and these are acknowledged in the text. A fuller list of the books, reviews and other literature ofthermal analysis is given towards the back of this book. The ICTA booklet 'For Better Thermal Analysis' is also a valuable source of information. I am particularly grateful to my wife, Cindy, for typing the manuscript, to Mrs Heather Wilson for the line drawings, and to Professor David Dollimore of the University of Toledo, Ohio, for many helpful suggestions.
Download or read book Essentials of Pharmaceutical Analysis written by Muhammad Sajid Hamid Akash and published by Springer Nature. This book was released on 2019-12-17 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the pharmaceutical sciences and biotechnology have facilitated the production, design, formulation and use of various types of pharmaceuticals and biopharmaceuticals. This book provides detailed information on the background, basic principles, and components of techniques used for the analysis of pharmaceuticals and biopharmaceuticals. Focusing on those analytical techniques that are most frequently used for pharmaceuticals, it classifies them into three major sections and 19 chapters, each of which discusses a respective technique in detail. Chiefly intended for graduate students in the pharmaceutical sciences, the book will familiarize them with the components, working principles and practical applications of these indispensable analytical techniques.
Download or read book Thermal Analysis of Polymeric Materials written by Bernhard Wunderlich and published by Springer Science & Business Media. This book was released on 2005-04-04 with total page 918 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of Contents Table of Contents 1 Atoms, small, and large molecules 2 Basics of thermal analysis 3 Dynamics of chemical and phase changes 4 Thermal analysis tools 5 Structure and properties of materials 6 Single component materials 7 Multiple component materials App. A.1 Table of thermal properties of linear macromolecules and related small molecules - the ATHAS data bank App. A.2 Radiation scattering App. A.3 Derivation of the Rayleigh ratio App. A.4 Neural network predictions App. A.5 Legendre transformations, Maxwell relations, linking of entropy and probability, and derivation of (dS/dT) App. A.6 Boltzmann distribution, harmonic vibration, complex numbers, and normal modes App. A.7 Summary of the basic kinetics of chemical reactions App. A.8 The ITS 1990 and the Krypton-86 length standard App. A.9 Development of classical DTA to DSC App. A.10 Examples of DTA and DSC under extreme conditions App. A.11 Description of an online correction of the heat-flow rate App. A.12 Derivation of the heat-flow equations App. A.13 Description of sawtooth-modulation response App. A.14 An introduction to group theory, definitions of configurations and conformations, and a summary of rational and irrational numbers App. A.15 Summary of birefringence and polarizing microscopy App. A.16 Summary of X-ray diffraction and interference effects App. A.17 Optical analog of electron double diffraction to produce Moire patterns.
Download or read book Comprehensive Handbook of Calorimetry and Thermal Analysis written by Michio Sorai and published by John Wiley & Sons. This book was released on 2004-09-03 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Modulated Temperature Differential Scanning Calorimetry written by Mike Reading and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: MTDSC provides a step-change increase in the power of calorimetry to characterize virtually all polymer systems including curing systems, blends and semicrystalline polymers. It enables hidden transitions to be revealed, miscibility to be accurately assessed, and phases and interfaces in complex blends to be quantified. It also enables crystallinity in complex systems to be measured and provides new insights into melting behaviour. All of this is achieved by a simple modification of conventional DSC. In 1992 a new calorimetric technique was introduced that superimposed a small modulation on top of the conventional linear temperature program typically used in differential scanning calorimetry. This was combined with a method of data analysis that enabled the sample’s response to the linear component of the temperature program to be separated from its response to the periodic component. In this way, for the first time, a signal equivalent to that of conventional DSC was obtained simultaneously with a measure of the sample’s heat capacity from the modulation. The new information this provided sparked a revolution in scanning calorimetry by enabling new insights to be gained into almost all aspects of polymer characteristics. This book provides both a basic and advanced treatment of the theory of the technique followed by a detailed exposition of its application to reacting systems, blends and semicrystalline polymers by the leaders in all of these fields. It is an essential text for anybody interested in calorimetry or polymer characterization, especially if they have found that conventional DSC cannot help them with their problems.
Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. Features 19 all-new chapters to bring readers up to date on the current status of the field Provides a broad overview of recent progress in the most popular techniques and applications Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications
