Download or read book Pressure Measurement in Vacuum Systems Second Edition written by and published by . This book was released on 1964 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Total and Partial Pressure Measurement in Vacuum Systems written by John Henry Leck and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the underlying theory and practical aspects of pressure gauges that are at present in general use. Because of the ever-increasing demands to provide a wider range of sophisticated and reliable vacuum equipment a good understanding of these instruments is of vital importance to all workers in the research and industrial sectors. Of the gauges considered only the mechanical types are absolute, in the sense that they measure pressure directly as a force upon a liquid column or a solid surface. Under ideal conditions it is possible to calculate their sensitiv ities, which are the same for all gases and vapours. The recent developments in the viscous or molecular damping gauges indicate that these may also be considered absolute. Other gauges are indirect in that they involve the measurement of some secondary phenomenon which is pressure-dependent and therefore these gauges can only be used for measurement after calibration against an absolute standard. The radiometer or Knudsen type gauge has been excluded from the text since these are now only of historic interest. Also no mention is made of the integration techniques involving surface changes (such as work function) although these could have application under very special circumstances. The McLeod gauge is dealt with in some detail, for even though this gauge has few practical applications, it is the most sensitive absolute gauge available and has value as a reference standard.
Download or read book Basic Vacuum Technology 2nd edition written by A. Chambers and published by CRC Press. This book was released on 1998-01-01 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum technology is widely used in many manufacturing and developmental processes and its applications grow in scope and sophistication. It is an inter-disciplinary subject, embracing aspects of mechanical, electrical and chemical engineering, chemistry, and materials science while having a broad foundation in physics. In spite of its technological importance, and perhaps because of its cross-disciplinary nature, substantial teaching and training is not widely available. Basic Vacuum Technology aims to give readers a firm foundation of fundamental knowledge about the subject and the ability to apply it. This book is an introductory text on how to use vacuum techniques. It provides a good grounding in the basic scientific principles and concepts that underlie the production and measurement of vacua. The authors describe how these are applied in representative low, medium, high, and ultra-high vacuum systems and explain the most important practical aspects of the operation of a large variety of pumps, components, and measuring instrumentation. The book introduces numerical methods for analysis and prediction of the behavior of vacuum systems in terms of the properties of their individual elements and enables readers to recognize and resolve problems with malfunctioning systems.
Download or read book Total Pressure Measurements in Vacuum Technology written by A. Berman and published by Academic Press. This book was released on 2014-06-28 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Total Pressure Measurements in Vacuum Technology focuses on the measurement of low total pressure in hostile environments or in the presence of magnetic fields. This book emphasizes the general processes and problems involved in measurement techniques and physical principles on which vacuum gauges operate, rather than on the detailed description of the gauges. The design and techniques involved in the use of special instruments that determine “pressure or gas density, such as pressure converters or radioactive gauges, are also described. This publication is mainly intended for graduate students and research scientists who have a good general background in physics and engineering.
Download or read book Pressure Measurement in Vacuum Systems written by J H (John Henry) Leck and published by Hassell Street Press. This book was released on 2021-09-09 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Introduction to Vacuum Technology written by David M. Hata and published by Prentice Hall. This book was released on 2008 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approach taken in this book is to approach vacuum systems from a pressure regime viewpoint. That is, after covering some basic chemistry, the first pressure regime covered is the rough vacuum regime. Within the study of rough vacuum systems, the following topics are covered: the gas load, the pumping mechanism, pressure measurement and vacuum system construction. The discussion of rough vacuum is then followed by the study of high-vacuum systems. The same topics are revisited, but this time from a high vacuum perspective. Once both rough vacuum and high vacuum systems are covered, then the topics of leak detection and residual gas analysis are introduced. This approach lends itself to laboratory experimentation. During the review of gas laws from chemistry, there are a number of experiments and demonstrations that can be performed to reinforce basic laws and concepts. Then, during the study of rough vacuum systems, pumpdown times can be calculated and pumpdowns performed in the laboratory. Likewise, during the study of high-vacuum systems, pumpdowns as well as other lab exercises, such as outgassing and residual gas analysis, can be conducted. Coverage of vacuum systems from a pressure regime viewpoint, rather than from a topical viewpoint. Focus on the fundamental science behind vacumm system components. This book is written for users of vacuum systems, especially the technicians that are responsible for maintaining them.
Download or read book Pressure Measurement in Vacuum Systems written by John Henry Leck and published by . This book was released on 1967 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bibliography and Index on Vacuum and Low Pressure Measurement January 1960 to December 1965 written by William George Brombacher and published by . This book was released on 1967 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A User s Guide to Vacuum Technology written by John F. O'Hanlon and published by John Wiley & Sons. This book was released on 2005-02-18 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade and a half since the publication of the Second Edition of A User?s Guide to Vacuum Technology there have been many important advances in the field, including spinning rotor gauges, dry mechanical pumps, magnetically levitated turbo pumps, and ultraclean system designs. These, along with improved cleaning and assembly techniques have made contamination-free manufacturing a reality. Designed to bridge the gap in both knowledge and training between designers and end users of vacuum equipment, the Third Edition offers a practical perspective on today?s vacuum technology. With a focus on the operation, understanding, and selection of equipment for industrial processes used in semiconductor, optics, packaging, and related coating technologies, A User?s Guide to Vacuum Technology, Third Edition provides a detailed treatment of this important field. While emphasizing the fundamentals and touching on significant topics not adequately covered elsewhere, the text avoids topics not relevant to the typical user.
Download or read book High Vacuum Technology written by Marsbed H. Hablanian and published by Routledge. This book was released on 2017-11-13 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a basic understanding of each important topic in vacuum science and technology, this book concentrates on pumping issues, emphasizes the behavior of vacuum pumps and vacuum systems, and explains the relationships between pumps, instrumentation and high-vacuum system performance. The book delineates the technical and theoretical aspects of the subject without getting in too deep. It leads readers through the subtleties of vacuum technology without using a dissertation on mathematics to get them there. An interesting blend of easy-to-understand technician-level information combined with engineering data and formulae, the book provides a non-analytical introduction to high vacuum technology.
Download or read book Measurement Instrumentation and Sensors Handbook Second Edition written by John G. Webster and published by CRC Press. This book was released on 2014-01-29 with total page 1641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.
Download or read book Vacuum Technology and Applications written by David J. Hucknall and published by Elsevier. This book was released on 2013-10-22 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacuum Technology and Applications reviews the most commonly encountered methods for the production, containment, and measurement of subatmospheric pressure. This book also outlines a number of very important applications of this technology. This text is organized into eight chapters and begins with a brief survey of the fundamental principles of vacuum technology. The succeeding chapters deal with the pumps used for the production of rough-medium and high-ultra-high vacua. These chapters specifically cover their principles, performance, and applications. These topics are followed by a discussion of the devices for residual gas analysis and partial pressure measurement. Other chapters consider the aspects of leak detection using He-specific mass spectrometer and the materials, components, and fabrication of vacuum devices. The final chapters explore the application of vacuum technology in critical areas of industrial activity, such as thin-film technology, semiconductor, metallurgy, and chemical industry. This book will prove useful to practicing mechanical, chemical, and design engineers.
Download or read book Vacuum Technology written by A. Roth and published by Elsevier. This book was released on 2012-12-02 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third updated and enlarged edition includes about 350 new papers added to the previous list of references. The contents have been revised and updated in the areas of: Thermonuclear pumping; Throughput; Transmission probability; Electronic circuit simulation; Sorption on charcoal; Desorption from porous materials; Desorption from stainless steel, A1 alloys (outgassing rates); Ion bombardment (glow discharge) cleaning; Clay - type pumps; Turbomolecular pumps-improvements; Cryosorption; NEG (Nonevaporable getter) linear pumps; Standards for measurement of pumping speed (Recommended practice, test domes); Spinning rotor gauges; Quartz friction gauges; Increase of sensitivity of thermocouple gauges; Lubrication in vacuum; Calibration of diffusion leaks; Improvements in leak detection. Besides its role in educational activities, the book will also serve as a handbook for those working in this field, or in fields connected to Vacuum Technology.Comments from the press on the second edition:"A valuable reference work for undergraduate libraries...well organized and clearly written and strikes an appropriate balance between completeness and attention to fundamentals. The index and references are unusually complete. Recommended." (Choice) "Roth's new book contains a comprehensive collection of information on rarefied-gas flow, physical and chemical phenomena associated with vacuum technology, the production and measurement of high vacuum and sealing and leak-detection techniques. One finds a wealth of equations, numerical examples, tables, graphs and monographs. The book is more a handbook than a source book of latest developments. It is suitable for teaching, but the wealth of organized data should also make the book highly useful to engineers..." (Physics Today)
Download or read book A Users Guide to Vacuum Technology written by John F. O'Hanlon and published by John Wiley & Sons. This book was released on 2023-10-16 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: A USERS GUIDE TO VACUUM TECHNOLOGY Choose and understand the vacuum technology that fits your project’s needs with this indispensable guide Vacuum technology is used to provide process environments for other kinds of engineering technology, making it an unsung cornerstone of hundreds of projects incorporating analysis, research and development, manufacturing, and more. Since it is very often a secondary technology, users primarily interested in processes incorporating it will frequently only encounter vacuum technology when purchasing or troubleshooting. There is an urgent need for a guide to vacuum technology made with these users in mind. For decades, A User’s Guide to Vacuum Technology has met this need, with a user-focused introduction to vacuum technology as it is incorporated into semiconductor, optics, solar sell, and other engineering processes. With an emphasis on otherwise neglected subjects and on accessibility to the secondary user of vacuum technology, it balances treatment of older systems that are still in use with a survey of the latest cutting-edge technologies. The result promises to continue as the essential guide to vacuum systems. Readers of the fourth edition of A User’s Guide to Vacuum Technology will also find: Expanded treatment of gauges, pumps, materials, systems, and best??operating practices Detailed discussion of cutting-edge topics like ultraclean vacuum and contamination control An authorial team with decades of combined research and engineering experience A User’s Guide to Vacuum Technology is essential for those entering emerging STEM programs, engineering professionals and graduate students working with a huge range of engineering technologies.
Download or read book Handbook of Vacuum Technology written by Karl Jousten and published by John Wiley & Sons. This book was released on 2008-11-24 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive standard work and important resource for both students and professionals in research and industry who need detailed knowledge of the theory and applications. Many numerical examples and numerous illustrations visualize the theoretical issues, backed by many useful tables and charts, plus over 500 illustrations. The Handbook discusses the latest developments in vacuum measurement techniques and leak detection in vacuum systems, as well as the connection of vacuum systems to computerized control systems.
Download or read book Bibliography and Index on Vacuum and Low Pressure Measurement written by William George Brombacher and published by . This book was released on 1961 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrahigh Vacuum Practice written by G. F. Weston and published by Elsevier. This book was released on 2013-10-22 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrahigh Vacuum Practice covers topics about components suitable for ultrahigh vacuum applications, their theory of operation, their assembly and use, and their performance and calibration. The book starts by discussing the fundamentals of vacuum science and technology. The text then describes the physical properties and methods of preparing the materials for ultrahigh vacuum and the various pumps and their performance and application to ultrahigh vacuum systems. The mechanism and performance of the various ultrahigh vacuum gauges and the problem of gauge calibration at low pressures, as well as the accuracy that can be expected are discussed as well. Partial pressure measurements, ultrahigh vacuum components, and liquid nitrogen replenisher are also considered. The book tackles the system requirements and applications, as well as methods for detecting leak. Users or potential users of ultrahigh vacuum equipment and expert vacuum engineers will find the book useful.
