Download or read book Pressure Equipment Technology written by W. M. Banks and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe design and operation of pressure equipment and pressure systems is key to much of the infrastructure in any present-day industrial society. This book presents an amalgam of best practice from a range of international specialists, as well as highlighting new areas that require research and development. In May 2002, pressure equipment took a major step forward with the emergence of the first edition of the new European Standard EN13445. Pressure Equipment Technology; Theory and Practice not only describes and analyses the status of the new Standard (providing underpinning data) but primarily it seeks to provide new light and present new information on many of the areas where there is insufficient coverage in EN13445 or other Standards. The information is presented in a variety of ways in order to make it useful not only for the specialist but for the general reader as well. The researcher in pressure vessel technology will find here a comprehensive and up-to date picture on many important and vital topics that need to be considered. The non-expert will also find a variety of different analysis approaches that will give interest in a whole spectrum of pressure equipment and storage vessels. The papers and information included in this volume give expert guidance on a variety of important topics that must be understood if appropriate design of pressure equipment is going to be undertaken. These include, Piping and Finite Element Analysis Saddles - Plastic Collapse Loads Vessel Ends and Eccentric Loads Containment Vessels Explosive Loading Welding and Fatigue
Download or read book High Pressure Technology Design Analysis and Safety of High Pressure Equipment Presented at the 1986 Pressure Vessels written by American Society of Mechanical Engineers and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Technology written by Ian L. Spain and published by CRC Press. This book was released on 1977-11-01 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Technology written by PVP Technical Subcommittee on High Pressure Technology, ASME. and published by . This book was released on 1986 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Process Technology Fundamentals and Applications written by A. Bertucco and published by Elsevier. This book was released on 2001-10-15 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clear evidence of increasing demands in the processing industry prompted the editors and authors to publish a new book about High Pressure Process Technology: Fundamentals and Applications.This book presents the latest knowledge regarding the high pressure processing aspects combined with that about the modeling, the design and the operation of safe and reliable high pressure plants and equipment. This treatment and selection of the subjects is stimulating and unique. Consisting of nine chapters, each subdivided into several sections, the book addresses the high pressure aspects, providing well selected correlated information connected with a comprehensive overview together with a large number of references. The main body of the first eight chapters refers to subjects like high pressure in general, the thermodynamics and kinetics of the fluids involved, the design of high pressure equipment, the modeling and design of reactors, separation and fractionation units, the safety aspects, the control and economics.In the extended last chapter, examples of promising high pressure applications are explained, such as chemical and enzymatic reactions in supercritical solvents, hydrogenation under supercritical conditions, supercritical water oxidation, polymerization with metallocene catalysts, supercritical extraction, fractionation and precipitation, supercritical pharma processing, ultra-high pressure sterilization and supercritical dry-cleaning.
Download or read book High Pressure Technology written by ASME. Pressure Vessels and Piping Technical Subcommittee on High Pressure Technology and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Pressure Equipment written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2005-01-14 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many developments in pressure equipment technology over the last 30 years culminating in the development of new standards and legislation. The aim of this collection of papers is not only to document views of leading professionals in various fields of pressure equipment technology, but also to look into the future and identify the next areas for development. Developments in Pressure Equipment - Where to Next? brings together international authors to provide an invaluble and comprehensive insight into the latest innovations in the field. Topics include: Legislation and standardization Design and materials Manufacture and inspection Integrity and life assessment Towards the future
Download or read book High Pressure Technology written by Ian L. Spain and published by . This book was released on 1977 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Vessels written by Phillip Ellenberger and published by McGraw Hill Professional. This book was released on 2004-07-16 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are found everywhere -- from basement boilers to gasoline tankers -- and their usefulness is surpassed only by the hazardous consequences if they are not properly constructed and maintained. This essential reference guides mechanical engineers and technicians through the maze of the continually updated International Boiler and Pressure Vessel Codes that govern safety, design, fabrication, and inspection. * 30% new information including coverage of the recent ASME B31.3 code
Download or read book Blowback written by Paul Brennan and published by National Board of Boiler & Pressure. This book was released on 2013-05-20 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by National Board Public Affairs Director of the National Board of Boiler and Pressure Vessel Inspectors Paul Brennan. the book connects the dots between industrial-size pressure vessels and common pressure-retaining items the public uses every day. Through compelling short stories, essays, illustrations, and rare photos, Blowback details the danger that exist when pressure equipment is misused, neglected, or defective."--Publisher description.
Download or read book Pressure Equipment Safety Systems for Unfired Pressure Vessels written by British Standards Institute Staff and published by . This book was released on 2002-06 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure equipment, Pressure vessels, Unfired pressure vessels, Chemical technology equipment, Pipes, Valves, Safety devices, Safety valves, Relief valves, Equipment safety
Download or read book Industrial High Pressure Applications written by Rudolf Eggers and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.
Download or read book Pressure Relief Devices written by Mohammad A. Malek and published by McGraw Hill Professional. This book was released on 2005-10-27 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the boiler, piping and pressure vessel industry, pressure relief devices are considered one of the most important safety components. These Devices are literally the last line of defense against catastrophic failure or even lose of life. Written in plain language, this fifth book in the ASME Simplified series addresses the various codes and recommended standards of practice for the maintenance and continued operations of pressure relief valves as specified by the American Society of Mechanical Engineers and the American Petroleum Institute. Covered in this book are: preventive maintenance procedures, methods for evaluation of mechanical components and accepted methods for cleaning, adjusting and lubricating various components to assure continued operation and speed performance as well as procedures for recording and evaluating these items.
Download or read book High Pressure Technology written by D. P. Kendall and published by . This book was released on 1986 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloquium on Development of European Pressure Vessel Equipment Directives and Standards written by International Council for Pressure Vessel Technology and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flaw Assessment in Pressure Equipment and Welded Structures written by John Wintle and published by Wiley. This book was released on 2000-07-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an amalgam of best practice from a range of international specialists, as well as highlighting new areas that require research and development. This present volume not only describes and analyses the status of the new Standard (providing underpinning data) but primarily it seeks to provide new light and present new information on many of the areas where there is insufficient coverage in EN13445 or other Standards. Pressure equipment took a major step forward in May 2002 with the emergence of the first edition of the new European Standard EN13445. The safe design and operation of pressure equipment and pressure systems is key to much of the infrastructure in any present-day industrial society. All of the authors were invited by the editors to make their contributions based on their international standing in the field of pressure equipment technology. Each paper went through a rigorous refereeing process (similar to the Proceedings of the IMechE), ensuring that they were of the highest quality and contained results of current and seminal research.
Download or read book Pressure Vessel And Piping Technology Proceedings Of The Seminar written by John Shing Tai Cheung and published by World Scientific. This book was released on 1993-05-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This last decade has seen remarkable growth in the Asian Pacific region in the off-shore oil, petrochemical, power and process industries and the rapid change in these fields requires constant updating and reappraisal of the available and new technologies. The proceedings of the seminar will contain papers from representatives from many countries to address current technological issues and discuss engineering development and operating experiences. The proceedings will therefore greatly benefit those who wish to learn about the new developments in the areas of application of pressure vessels and piping technology.
