Download or read book Preparations Properties and Applications of Periodic Nano Arrays Using Anodized Aluminum Oxide and Di block Copolymer written by Kunbae Noh and published by . This book was released on 2011 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-ordered arrangements observed in various materials systems such as anodic aluminum oxide, polystyrene nanoparticles, and block copolymer are of great interest in terms of providing new opportunities in nanofabrication field where lithographic techniques are broadly used in general. Investigations on self-assembled nano arrays to understand how to obtain periodic nano arrays in an efficient yet inexpensive way, and how to realize advanced material and device systems thereof, can lead to significant impacts on science and technology for many forefront device applications. In this thesis, various aspects of periodic nano-arrays have been discussed including novel preparations, properties and applications of anodized aluminum oxide (AAO) and PS-b-P4VP (S4VP) di-block copolymer self-assembly. First, long-range ordered AAO arrays have been demonstrated. Nanoimprint lithography (NIL) process allowed a faithful pattern transfer of the imprint mold pattern onto Al thin film, and interesting self-healing and pattern tripling phenomena were observed, which could be applicable towards fabrication of the NIL master mold having highly dense pattern over large area, useful for fabrication of a large-area substrate for predictable positioning of arrayed devices. Second, S4VP diblock copolymer self-assembly and S4VP directed AAO self-assembly have been demonstrated in the Al thin film on Si substrate. Such a novel combination of two dissimilar self-assembly techniques demonstrated a potential as a versatile tool for nanopatterning formation on a Si substrate, capable of being integrated into Si process technology. As exemplary applications, vertically aligned Ni nanowires have been synthesized into an S4VP-guided AAO membrane on a Si substrate in addition to anti-dot structured [Co/Pd]n magnetic multilayer using S4VP self assembly. Third, a highly hexagonally ordered, vertically parallel aluminum oxide nanotube array was successfully fabricated via hard anodization technique. The Al2O3 nanotube arrays so fabricated exhibit a uniform and reproducible dimension, and a quite high aspect ratio of greater than ~1,000. Such high-aspect-ratio, mechanically robust, large-surface-area nanotube array structure can be useful for many technical applications. As a potential application in biomedical research, drug storage/controlled drug release from such AAO nanotubes was investigated, and the advantageous potential of using AAO nanotubes for biological implant surface coatings alternative to TiO2 nanotubes has been discussed.
Download or read book Characterization of Nano arrays Fabricated Via Self assembly of Block Copolymers written by Marianna Shnayderman and published by . This book was released on 2004 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research focused on methods for regulating arrangement of self-assembled block copolymers by understanding fabrication conditions and their effects on the polymers on flat and patterned substrates. Block copolymer self-assembly is a simple and low cost process for creating lithographic masks with features under 100nm in dimension. These patterns can be transferred to more permanent materials for applications in electronics, magnetic devices, as well as sensors and filters. Polystyrene-poly(ferrocenyldimethylsilane) block copolymer thin films were characterized in terms of their spin curves, PSF spherical domain cross sectional area distributions, and correlation distances. Optimal fabrication conditions were selected from studying polymer behavior on flat substrates and then used for templated substrate studies. Substrates that were templated with grooves produced quantized numbers of rows of spherical domains ranging from 4 to 7. Behavior in these grooves was characterized in terms of groove width constraints, cross sectional domain area distributions, and row ordering. For all templated arrays, the lengths of ordered regions were more than 2 fold higher than the diameters of ordered regions of arrays on flat substrates. The characterization accomplished in this work will be used to compare block copolymers with similar volume fractions of the blocks that allow sphere microdomain formation but of different molecular weights. The ultimate goals are to establish how the molecular weight of this block copolymer affects its self assembly on templated and on flat substrates and to use this factor as well as fabrication conditions and template geometries to engineer arrays with desirable properties.
Download or read book Fabrication and Applications of Nanocomposite Structures Using Anodized Aluminum Oxide Membranes written by Andrew Isaac Gapin and published by . This book was released on 2007 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of nanotechnology continues to advance and device feature sizes scale down to ever smaller dimensions, it is becoming increasingly important to develop quick and efficient methods for large-scale production at the nanoscale. Creating such a template would have widespread uses in areas such as magnetic data storage, chemical sensors, and mask technology. One promising approach to realizing this goal may lie in utilizing the self-ordering behavior found in porous anodized aluminum oxide (AAO). This material offers many advantages such as the ability to customize the pore diameter and spacing and easy device integration based on its compatibility with silicon substrates. The pores of the AAO templates can be filled with many different materials via electrochemical deposition or other methods to produce numerous potential devices. In this work, current research results detailing the fabrication of AAO templates and their use in creating ~100 nm tall CoPt, Ni, and composite Ni/CoPt nanowires is demonstrated. The synthesis of such nanostructures may ultimately be advantageous for new types of patterned magnetic recording media. The Ni nanowires exhibit relatively soft magnetic coercivity of 242 Oe, while the CoPt nanowires show a very high coercivity of at least 10.97 kOe, measured in the perpendicular direction along the nanowires axis. The composite soft magnet / hard magnet Ni/CoPt nanowires exhibit intermediate perpendicular coercivities depending on the relative amounts of Ni and CoPt. The Ni80nm / CoPt20nm nanowires showed a coercivity of 1.96 kOe, the Ni50nm / CoPt50nm nanowires had a coercivity of 3.59 kOe, and the Ni20nm / CoPt80nm nanowires had a coercivity of 5.10 kOe. This marked decrease in the coercivity is significant because it could facilitate easier magnetic data writing. Analysis of the magnetic properties of the various nanowire structures and their dependence on the processing parameters is presented. A method for utilizing the AAO structure to replicate a master stamp for nanoimprinting technology is also discussed. In addition, plans for future work and a discussion of the application of these fabricated structures towards magnetic recording technology are presented.
Download or read book Fabrication of Nano scale DNA Arrays Using Diblock Copolymers written by Abhishek Gupta and published by . This book was released on 2008 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of Periodic Arrays of Metallic Nanoparticles by Block Copolymer Templates on HfO2 Substrates written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanoporous Alumina written by Dusan Losic and published by Springer. This book was released on 2015-07-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives detailed information about the fabrication, properties and applications of nanoporous alumina. Nanoporous anodic alumina prepared by low-cost, simple and scalable electrochemical anodization process due to its unique structure and properties have attracted several thousand publications across many disciplines including nanotechnology, materials science, engineering, optics, electronics and medicine. The book incorporates several themes starting from the understanding fundamental principles of the formation nanopores and theoretical models of the pore growth. The book then focuses on describing soft and hard modification techniques for surface and structural modification of pore structures to tailor specific sensing, transport and optical properties of nano porous alumina required for diverse applications. These broad applications including optical biosensing, electrochemical DNA biosensing, molecular separation, optofluidics and drug delivery are reviewed in separated book chapters. The book appeals to researchers, industry professionals and high-level students.
Download or read book Nanocasting written by An-Hui Lu and published by Royal Society of Chemistry. This book was released on 2010 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials with tailored properties are regarded as a fundamental element in the development of future science and technology. Research is still ongoing into the nanosized construction elements required to create functional solids. The recently developed technique, nanocasting, has great advantage over others in terms of the synthesis of special nanostructured materials by the careful choice of suitable elements and nanoengineering steps. This new book summarizes the recent developments in nanocasting, including the principles of nanocasting, syntheses of novel nanostructured materials, characterization methods, detailed synthetic recipes and further possible development in this area. The book focuses on the synthesis of porous solids from the viewpoint of methodology and introduces the science of nanocasting from fundamental principles to their use in synthesis of various materials. It starts by outlining the principles of nanocasting, requirements to the templates and precursors and the tools needed to probe matter at the nanoscale level. It describes how to synthesize nano structured porous solids with defined characteristics and finally discusses the functionalization and application of porous solids. Special attention is given to new developments in this field and future perspectives. A useful appendix covering the detailed synthetic recipes of various templates including porous silica, porous carbon and colloidal spheres is included which will be invaluable to researchers wanting to follow and reproduce nanocast materials. Topics covered in the book include: * inorganic chemistry * organic chemistry * solution chemistry * sol-gel and interface science * acid-base equilibria * electrochemistry * biochemistry * confined synthesis The book gives readers not only an overview of nanocasting technology, but also sufficient information and knowledge for those wanting to prepare various nanostructured materials without needing to search the available literature.
Download or read book Electrodeposited Nanowires and their Applications written by Nicoleta Lupu and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a new and complex perspective on the fabrication and use of electrodeposited nanowires for the design of efficient and competitive applications. While not pretending to be comprehensive, the book is addressing not only to researchers specialized in this field, but also to Ph.D. students, postdocs and experienced technical professionals.
Download or read book The Surface Treatment and Finishing of Aluminium and Its Alloys written by P. G. Sheasby and published by . This book was released on 2001 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Block Copolymers II written by Volker Abetz and published by Springer Science & Business Media. This book was released on 2005-12-02 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: . A.J. M ller, V. Balsamo, M.L. Arnal: Nucleation and Crystallization in Diblock and Triblock Copolymers.- 2 J.-F. Gohy: Block Copolymer Micelles.- 3 M.A. Hillmyer: Nanoporous Materials from Block Copolymer Precursors.- 4 M. Li, C. Coenjarts, C.K. Ober: Patternable Block Copolymers.-
Download or read book Nanostructured Materials in Electrochemistry written by Ali Eftekhari and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the unique and vital link between the worlds of electrochemistry and nanomaterials, this reference and handbook covers advances in electrochemistry through the nanoscale control of electrode structures, as well as advances in nanotechnology through electrochemical synthesis strategies. It demonstrates how electrochemical methods are of great scientific and commercial interest due to their low cost and high efficiency, and includes the synthesis of nanowires, nanoparticles, nanoporous and layered nanomaterials of various compositions, as well as their applications -- ranging from superior electrode materials to energy storage, biosensors, and electroanalytical devices.
Download or read book Self Assembled Structures written by Jingcheng Hao and published by CRC Press. This book was released on 2016-04-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembly is a process in which a disordered system forms an organized structure without external direction. Examples include the formation of molecular crystals, lipid bilayers, and polymer brushes. This book reviews the fabrication and use of various self-assembled materials. In particular, the author pays special attention to self-assembled
Download or read book Submicron Porous Materials written by Paolo Bettotti and published by Springer. This book was released on 2017-02-21 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest research on porous materials at the submicron scale and inspires readers to better understand the porosity of materials, as well as to develop innovative new materials. A comprehensive range of materials are covered, including carbon-based and organic-based porous materials, porous anodic alumina, silica, and titania-based sol-gel materials. The fabrication, characterization, and applications of these materials are all explored, with applications ranging from sensors, thermoelectrics, catalysis, energy storage, to photovoltaics. Also of practical use for readers are chapters that describe the basics of porous silicon fabrication and its use in optical sensing and drug delivery applications; how thermal transport is affected in porous materials; how to model diffusion in porous materials; and a unique chapter on an innovative spectroscopic technique used to characterize materials' porosity. This is an ideal book for graduate students, researchers, and professionals who work with porous materials.
Download or read book Nanostructure Science and Technology written by Richard W. Siegel and published by Springer Science & Business Media. This book was released on 1999-09-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timely information on scientific and engineering developments occurring in laboratories around the world provides critical input to maintaining the economic and technological strength of the United States. Moreover, sharing this information quickly with other countries can greatly enhance the productivity of scientists and engineers. These are some of the reasons why the National Science Foundation (NSF) has been involved in funding science and technology assessments comparing the United States and foreign countries since the early 1980s. A substantial number of these studies have been conducted by the World Technology Evaluation Center (WTEC) managed by Loyola College through a cooperative agreement with NSF. The National Science and Technology Council (NSTC), Committee on Technology's Interagency Working Group on NanoScience, Engineering and Technology (CT/IWGN) worked with WTEC to develop the scope of this Nanostucture Science and Technology report in an effort to develop a baseline of understanding for how to strategically make Federal nanoscale R&D investments in the coming years. The purpose of the NSTC/WTEC activity is to assess R&D efforts in other countries in specific areas of technology, to compare these efforts and their results to U. S. research in the same areas, and to identify opportunities for international collaboration in precompetitive research. Many U. S. organizations support substantial data gathering and analysis efforts focusing on nations such as Japan. But often the results of these studies are not widely available. At the same time, government and privately sponsored studies that are in the public domain tend to be "input" studies.
Download or read book Hot Embossing written by Matthias Worgull and published by William Andrew. This book was released on 2009-09-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an overview of replication technology for micro- and nanostructures, focusing on the techniques and technology of hot embossing, a scaleable and multi-purpose technology for the manufacture of devices such as BioMEMS and microfluidic devices which are expected to revolutionize a wide range of medical and industrial processes over the coming decade.The hot embossing process for replicating microstructures was developed by the Forschungszentrum Karlsruhe (Karlsruhe Institute of Technology) where the author is head of the Nanoreplication Group. Worgull fills a gap in existing information by fully detailing the technology and techniques of hot embossing. He also covers nanoimprinting, a process related to hot embossing, with examples of actual research topics and new applications in nanoreplication. A practical and theoretical guide to selecting the materials, machinery and processes involved in microreplication using hot embossing techniques Compares different replication processes such as: micro injection molding, micro thermoforming, micro hot embossing, and nanoimprinting Details commercially available hot embossing machinery and components like tools and mold inserts
Download or read book Perovskite Photovoltaics written by Aparna Thankappan and published by Academic Press. This book was released on 2018-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Perovskite Photovoltaics: Basic to Advanced Concepts and Implementation examines the emergence of perovskite photovoltaics, associated challenges and opportunities, and how to achieve broader development. Consolidating developments in perovskite photovoltaics, including recent progress solar cells, this text also highlights advances and the research necessary for sustaining energy. Addressing different photovoltaics fields with tailored content for what makes perovskite solar cells suitable, and including commercialization examples of large-scale perovskite solar technology. The book also contains a detailed analysis of the implementation and economic viability of perovskite solar cells, highlighting what photovoltaic devices need to be generated by low cost, non-toxic, earth abundant materials using environmentally scalable processes. This book is a valuable resource engineers, scientists and researchers, and all those who wish to broaden their knowledge on flexible perovskite solar cells. Includes contributions by leading solar cell academics, industrialists, researchers and institutions across the globe Addresses different photovoltaics fields with tailored content for what makes perovskite solar cells different Provides commercialization examples of large-scale perovskite solar technology, giving users detailed analysis on the implementation, technical challenges and economic viability of perovskite solar cells
Download or read book Polymer Morphology written by Qipeng Guo and published by John Wiley & Sons. This book was released on 2016-05-16 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a focus on structure-property relationships, this book describes how polymer morphology affects properties and how scientists can modify them. The book covers structure development, theory, simulation, and processing; and discusses a broad range of techniques and methods. • Provides an up-to-date, comprehensive introduction to the principles and practices of polymer morphology • Illustrates major structure types, such as semicrystalline morphology, surface-induced polymer crystallization, phase separation, self-assembly, deformation, and surface topography • Covers a variety of polymers, such as homopolymers, block copolymers, polymer thin films, polymer blends, and polymer nanocomposites • Discusses a broad range of advanced and novel techniques and methods, like x-ray diffraction, thermal analysis, and electron microscopy and their applications in the morphology of polymer materials
