Download or read book Preparation of Model Unsaturated Soil Beds for Calibration Chamber Testing written by Norman Keng Huat Tan and published by . This book was released on 2000 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsaturated Soils written by José Fernando Thome Jucá and published by CRC Press. This book was released on 2002 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated materials comprise residua, collapsible and expansive naturally occurring soils, compacted soils and, more recently, residues of solid wastes. The engineering problems associated with unsaturated materials range from those related to conventional geotechnical works (e.g. foundations, pavements, slopes and excavations, retaining structures, earthdams, irrigation canals, tunnelling, compacted embankments) to those included in the environmental area (e.g. natural slope instability, erosion and subsidence processes, tailings, residues or solid waste disposal, contaminant transport, remediation of contaminant sites, engineered barriers for environmental protection, re-use of residues). This book, published in three separate volumes, comprises a selection of selected and invited papers presented at the Third International Conference on Unsaturated Soils – UNSAT ‘2002 – that took place in Recife, Brazil, form 10th to 13th March 2002. The book is of interest to consultants, researchers, practitioners, lecturers and students with a background in geotechnical engineering, environmental engineering and engineering geology.
Download or read book Unsaturated Soils Research Applications written by Nasser Khalili and published by CRC Press. This book was released on 2014-06-05 with total page 1850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Soils: Research and Applications contains 247 papers presented at 6th International Conference on Unsaturated Soils (UNSAT2014, Sydney, Australia, 2-4 July 2014). The two volumes provide an overview of recent experimental and theoretical advances in a wide variety of topics related to unsaturated soil mechanics: - Unsaturated Soil Behavior - Experimentation - Modelling - Case Histories - Geotechnical Engineering Problems - Multidisciplinary and New Areas Unsaturated Soils: Research and Applications presents a wealth of information, and is of interest to researchers and practising engineers in soil mechanics and geotechnical engineering. These proceedings are dedicated to Professor Geoffrey E. Blight (1934-2013), who passed in November 2013.
Download or read book The Design and Construction of a Calibration Chamber for Testing Unsaturated Soils written by David Ryan Lauder and published by . This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Unsaturated Soils Volume 3 written by J.F.T Juca and published by CRC Press. This book was released on 2021-05-30 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated materials comprise residua, collapsible and expansive naturally occurring soils, compacted soils and, more recently, residues of solid wastes. The engineering problems associated with unsaturated materials range from those related to conventional geotechnical works (e.g. foundations, pavements, slopes and excavations, retaining structures, earthdams, irrigation canals, tunnelling, compacted embankments) to those included in the environmental area (e.g. natural slope instability, erosion and subsidence processes, tailings, residues or solid waste disposal, contaminant transport, remediation of contaminant sites, engineered barriers for environmental protection, re-use of residues). This book, published in three separate volumes, comprises a selection of selected and invited papers presented at the Third International Conference on Unsaturated Soils – UNSAT ‘2002 – that took place in Recife, Brazil, form 10th to 13th March 2002. The book is of interest to consultants, researchers, practitioners, lecturers and students with a background in geotechnical engineering, environmental engineering and engineering geology.
Download or read book Laboratory and Field Testing of Unsaturated Soils written by Alessandro Tarantino and published by Springer Science & Business Media. This book was released on 2008-12-28 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume details recent global advances in laboratory and field testing of unsaturated soils. Coverage includes mechanical, hydraulic, and geo-environmental testing and applications of unsaturated soil monitoring to engineering behavior of geo-structures.
Download or read book Soil and Rock America 2003 written by Patricia J. Culligan and published by . This book was released on 2003 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Unsaturated Soils written by Bernardo Caicedo and published by CRC Press. This book was released on 2013-01-17 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: New theories and testing techniques related with Unsaturated Soil Mechanics have proven to be valuable tools to study a broad spectrum of geo-materials which includes rocks, rock fills, frozen soils and domiciliary solid wastes. These new theories and testing techniques have permitted the analysis of several traditional problems from a new perspect
Download or read book A Clay Calibration Chamber for Testing Field Devices written by WF. Anderson and published by . This book was released on 1991 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design of a calibration chamber suitable for the preparation of uniform clay beds in which the performance of full-size field test devices may be studied. Details are given of the clay bed preparation procedure by which clay slurry is initially consolidated under K0 conditions and then further conso using equal or unequal horizontal and vertical stresses. Field equipment may be tested in the clay bed, which is maintained under known horizontal and vertical boundary stresses during the test. Self-boring pressuremeter tests have been successfully carried out in the clay bed.
Download or read book Evaluate Unsaturated Soil Behavior Using Constant Water Content Triaxial Tests written by 李林 and published by . This book was released on 2015 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The triaxial test has been extensively used to evaluate both saturated and unsaturated soil behaviors. The conventional triaxial test apparatus for saturated soils cannot be used to test unsaturated soils due to difficulties in soil volume and suction measurement. In 1961, a suction-controlled triaxial test apparatus was developed to investigate behavior of unsaturated soils. Since this development, the suction-controlled test has been widely used for unsaturated soil characterization. Most important concepts concerning unsaturated soil mechanics were developed based upon results from suction-controlled tests. However, the suction-controlled triaxial test on unsaturated soils, which is a drained test, is usually laborious, time-consuming, and costly, and may not be justifiable for routine engineering projects. The constant water content (undrained) test has been widely used to investigate saturated soil behaviors. However, for unsaturated soils, due to difficulties in direct, rapid, and reliable suction measurement, the constant water content test was rarely used for unsaturated soil behavior evaluation. In addition, accurate volume change measurement of unsaturated soils was a great challenge for researchers. Recently, the Modified State Surface Approach (MSSA) has been developed to calibrate unsaturated soil behaviors. According to MSSA, both results from suction-controlled and constant water content triaxial tests can be used for constitutive behavior calibration on unsaturated soils. In this study, a new triaxial test system was developed to investigate unsaturated soil behaviors through constant water content triaxial tests. To measure soil suction variation during testing, a new type of high-suction tensiometer was developed based on a commercial miniature pressure transducer. A 15 bar air-entry ceramic disc was used as the filter of the high-suction tensiometer. After saturation and calibration, this new type of high-suction tensiometer could be utilized for matric suction measurement on unsaturated soils with a maximum measurable suction up to 1100 kPa determined via a free evaporation test. To measure the volume change of unsaturated soils during triaxial testing, a photogrammetry-based method was developed by integrating photogrammetry, optical-ray tracing, and least-square estimation techniques. Through two validation tests on a stainless steel cylinder and a saturated sand specimen, the average point and total volume change measurement accuracy were determined to be approximately 0.065 mm and 0.05%, respectively. With this method, the conventional triaxial test apparatus for saturated soils can be used for triaxial testing on unsaturated soils without any modification. In addition to total volume change measurement, the newly developed photogrammetry-based method can also be used to investigate the deformation characteristics of soils during triaxial testing such as full-field deformation, volumetric strain non-uniformity, full-field strain distribution, and shear band evolution process. To evaluate the performance of the new triaxial testing system, a series of constant water content triaxial tests were carried out on unsaturated soils. New methods were proposed to characterize shear strength of the tested unsaturated soils. Also, an example was given to calibrate the constitutive behavior of an unsaturated soil based on results from the constant water content triaxial tests. Analysis results indicated that the proposed triaxial testing system is a cost effective and time efficient alternative to the suction-controlled triaxial testing system. In geotechnical and highway engineering, many projects involve unsaturated soils at shallow depths with low confining stresses (less than 100 kPa). To investigate the behavior of unsaturated soils at low confining stresses, the new triaxial testing system was simplified to a modified unconfined compression testing system. In this simplified system, negative air pressure (i.e., vacuum pressure) was used to provide the low confining stress for the triaxial tests. The high-suction tensiometers were used to monitor soil matrix suction variation during testing. A photogrammetric method was utilized for deformation measurements of unsaturated soils during triaxial testing. A series of undrained triaxial tests was also carried out to demonstrate the use of the modified unconfined compression testing system for unsaturated soil behavior evaluation under different confining stresses.
Download or read book Highway Research Abstracts written by and published by . This book was released on 1991 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Unsaturated Soil Mechanics in Engineering Practice written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 2012-07-30 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to unsaturated soil— from the world's experts on the subject This book builds upon and substantially updates Fredlund and Rahardjo's publication, Soil Mechanics for Unsaturated Soils, the current standard in the field of unsaturated soils. It provides readers with more thorough coverage of the state of the art of unsaturated soil behavior and better reflects the manner in which practical unsaturated soil engineering problems are solved. Retaining the fundamental physics of unsaturated soil behavior presented in the earlier book, this new publication places greater emphasis on the importance of the "soil-water characteristic curve" in solving practical engineering problems, as well as the quantification of thermal and moisture boundary conditions based on the use of weather data. Topics covered include: Theory to Practice of Unsaturated Soil Mechanics Nature and Phase Properties of Unsaturated Soil State Variables for Unsaturated Soils Measurement and Estimation of State Variables Soil-Water Characteristic Curves for Unsaturated Soils Ground Surface Moisture Flux Boundary Conditions Theory of Water Flow through Unsaturated Soils Solving Saturated/Unsaturated Water Flow Problems Air Flow through Unsaturated Soils Heat Flow Analysis for Unsaturated Soils Shear Strength of Unsaturated Soils Shear Strength Applications in Plastic and Limit Equilibrium Stress-Deformation Analysis for Unsaturated Soils Solving Stress-Deformation Problems with Unsaturated Soils Compressibility and Pore Pressure Parameters Consolidation and Swelling Processes in Unsaturated Soils Unsaturated Soil Mechanics in Engineering Practice is essential reading for geotechnical engineers, civil engineers, and undergraduate- and graduate-level civil engineering students with a focus on soil mechanics.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Runoff Prediction in Ungauged Basins written by Günter Blöschl and published by Cambridge University Press. This book was released on 2013-04-18 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predicting water runoff in ungauged water catchment areas is vital to practical applications such as the design of drainage infrastructure and flooding defences, runoff forecasting, and for catchment management tasks such as water allocation and climate impact analysis. This full colour book offers an impressive synthesis of decades of international research, forming a holistic approach to catchment hydrology and providing a one-stop resource for hydrologists in both developed and developing countries. Topics include data for runoff regionalisation, the prediction of runoff hydrographs, flow duration curves, flow paths and residence times, annual and seasonal runoff, and floods. Illustrated with many case studies and including a final chapter on recommendations for researchers and practitioners, this book is written by expert authors involved in the prestigious IAHS PUB initiative. It is a key resource for academic researchers and professionals in the fields of hydrology, hydrogeology, ecology, geography, soil science, and environmental and civil engineering.
