Download or read book Preparation and Certification of Large sized Dried LSD Spike IRMM 1027p written by and published by . This book was released on 2014 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: IRMM Large-Sized Dried (LSD) Spikes are widely used as a fundamental part of the fissile material control of irradiated nuclear fuel and have been provided on a regular basis to safeguards authorities and industry for more than 10 years. This report describes the preparation and certification of a new batch of LSD Spikes. IRMM-1027p is a dried nitrate material in cellulose acetate butyrate (CAB), certified for the mass of uranium and plutonium and isotope amount ratios per unit. The material was produced following ISO Guide 34:2009. The certified reference materials uranium metal EC NRM 101, enriched uranium metal NBL CRM-116 and plutonium metal CETAMA MP2 were used as starting materials to prepare the mother solution. This solution was dispensed by means of an automated robot system into individual units and dried down.^A solution of an organic substance, cellulose acetate butyrate (CAB), was dried on the spike material as a stabiliser to retain the dried material at the bottom of the vial. Between unit-homogeneity was quantified and stability during dispatch and storage were assessed in accordance with ISO Guide 35:2006. The certified values were obtained from the gravimetric preparation of the mother solution, taking into account the mass, purity and isotopic abundances of the starting materials, the mass of the mother solution, and the mass of an aliquot in each individual unit. The certified values were confirmed by isotope dilution thermal ionisation mass spectrometry (ID-TIMS) and thermal ionisation mass spectrometry (TIMS) as independent confirmation methods. Uncertainties of the certified values were estimated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties related to possible inhomogeneity and to characterisation.^This spike CRM is applied as a calibrant to measure the uranium and plutonium amount content of dissolved spent nuclear fuel solutions using isotope dilution mass spectrometry (IDMS). Each unit contains about 50 mg of uranium with a relative mass fraction m(235U)/m(U) of 17.4 % and 1.8 mg of plutonium with a relative mass fraction m(239Pu)/m(Pu) of 97.8 % as dried nitrates in CAB. The whole amount of sample per unit has to be used for analysis.
Download or read book Preparation and Certification of Large sized Dried LSD Spike IRMM 1027o written by and published by . This book was released on 2013 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: IRMM Large-Sized Dried (LSD) Spikes are widely used as a fundamental part of the fissile material control of irradiated nuclear fuel and have been provided on a regular basis to safeguards authorities and industry for more than 10 years. This report describes the preparation and certification of a new batch of LSD Spikes. IRMM-1027o is a dried nitrate material in cellulose acetate butyrate (CAB), certified for the mass of uranium and plutonium and isotope amount ratios per unit. The material was produced following ISO Guide 34:2009. The certified reference materials uranium metal EC NRM 101, enriched uranium metal NBL CRM-116 and plutonium metal CETAMA MP2 were used as starting materials to prepare the mother solution. This solution was dispensed by means of an automated robot system into individual units and dried down.^A solution of an organic substance, cellulose acetate butyrate (CAB), was dried on the spike material as a stabilizer to retain the dried material at the bottom of the vial. Between unit-homogeneity was quantified and stability during dispatch and storage were assessed in accordance with ISO Guide 35:2006. The certified values were obtained from the gravimetric preparation of the mother solution, taking into account the mass, purity and isotopic abundances of the starting materials, the mass of the mother solution, and the mass of an aliquot in each individual unit. The certified values were confirmed by isotope dilution thermal ionisation mass spectrometry (ID-TIMS) and thermal ionisation mass spectrometry (TIMS) as independent confirmation methods. Uncertainties of the certified values were estimated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties related to possible inhomogeneity and to characterisation.^This spike CRM is applied as a calibrant to measure the uranium and plutonium amount content of dissolved spent nuclear fuel solutions using isotope dilution mass spectrometry (IDMS). Each unit contains about 50 mg of uranium with a relative mass fraction m(235U)/m(U) of 19.3% and 1.8 mg of plutonium with a relative mass fraction m(239Pu)/m(Pu) of 97.8% as dried nitrate in CAB. The whole amount of sample per unit has to be used for analysis.
Download or read book Preparation and Certification of Large Sized Dried LSD Spike IRMM 1027q written by and published by . This book was released on 2015 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: IRMM Large-Sized Dried (LSD) Spikes are widely used as a fundamental part of the fissile material control of irradiated nuclear fuel and have been provided on a regular basis to safeguards authorities and industry for more than 10 years. This report describes the preparation and certification of a new batch of LSD Spikes. IRMM-1027q is a dried nitrate material in cellulose acetate butyrate (CAB), certified for the mass of uranium and plutonium and isotope amount ratios per unit. The material was produced following ISO Guide 34:2009. The certified reference materials uranium metal EC NRM 101, enriched uranium metal NBL CRM 116-A and plutonium metal CETAMA MP2 were used as starting materials to prepare the mother solution. This solution was dispensed by means of an automated robot system into individual units and dried down.^A solution of an organic substance, cellulose acetate butyrate (CAB), was dried on the spike material as a stabiliser to retain the dried material at the bottom of the vial. Between unit-homogeneity was quantified and stability during dispatch and storage were assessed in accordance with ISO Guide 35:2006. The certified values for the uranium and plutonium isotope amount ratios and for the mass of uranium per unit were obtained from the gravimetric preparation of the mother solution, taking into account the mass, purity and isotopic abundances of the starting materials, the mass of the mother solution, and the mass of an aliquot in each individual unit. The certified values for the mass of plutonium per unit were established by isotope dilution thermal ionisation mass spectrometry (ID-TIMS). Confirmatory measurements were performed by isotope dilution thermal ionisation mass spectrometry (ID-TIMS) and thermal ionisation mass spectrometry (TIMS).^Uncertainties of the certified values were estimated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM) and include uncertainties related to possible inhomogeneity and to characterisation. This spike CRM is applied as a calibrant to measure the uranium and plutonium amount content of dissolved spent nuclear fuel solutions using isotope dilution mass spectrometry (IDMS). Each unit contains about 55 mg of uranium with a relative mass fraction m(235U)/m(U) of 17.7 % and 1.9 mg of plutonium with a relative mass fraction m(239Pu)/m(Pu) of 97.8 % as dried nitrates in CAB. The whole amount of sample per unit has to be used for analysis.
Download or read book Preparation and Certification of IRMM 1027m Large Sized Dried Spike written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparation and Certification of IRMM 1027n Large Sized Dried Spike written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compilation of Minimum and Maximum Isotope Ratios of Selected Elements in Naturally Occurring Terrestrial Materials and Reagents written by Tyler B. Coplen and published by . This book was released on 2002 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Documented variations in the isotopic compositions of some chemical elements are responsible for expanded uncertainties in the standard atomic weights published by the Commission on Atomic Weights and Isotopic Abundances of the International Union of Pure and Applied Chemistry. This report summarizes reported variations in the isotopic compositions of 20 elements that are due to physical and chemical fractionation processes (not due to radioactive decay) and their effects on the standard atomic weight uncertainties. For 11 of those elements (hydrogen, lithium, boron, carbon, nitrogen, oxygen, silicon, sulfur, chlorine, copper, and selenium), standard atomic weight uncertainties have been assigned values that are substantially larger than analytical uncertainties because of common isotope abundance variations in materials of natural terrestrial origin. For 2 elements (chromium and thallium), recently reported isotope abundance variations potentially are large enough to result in future expansion of their atomic weight uncertainties. For 7 elements (magnesium, calcium, iron, zinc, molybdenum, palladium, and tellurium), documented isotope-abundance variations in materials of natural terrestrial origin are too small to have a significant effect on their standard atomic weight uncertainties.
Download or read book Safety Evaluation of Certain Contaminants in Food written by Joint FAO/WHO Expert Committee on Food Additives. Meeting and published by WHO Food Additives. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The detailed monographs in this volume summarize the technical, analytical, dietary exposure and toxicological data on a number of contaminants in food: acrylamide, arsenic, deoxydivalenol, furan, mercury and perchlorate. This volume and others in the WHO Food Additives series contain information that is useful to those who produce and use food additives and veterinary drugs and those involved with controlling contaminants in food, government and food regulatory officers, industrial testing laboratories, toxicological laboratories and universities.
Download or read book Sediment Quality Assessment written by Graeme Batley and published by CSIRO PUBLISHING. This book was released on 2016-02-01 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contaminated sediments represent an ongoing threat to the health of aquatic ecosystems. The assessment of sediment quality is, therefore, an important concern for environmental regulators. Sediment quality guidelines are now well established in regulatory frameworks worldwide; however, practical guidance that covers all of the key aspects of sediment quality assessment is not readily available. In 2005, CSIRO published its highly cited Handbook for Sediment Quality Assessment. In the ensuing period, the science has advanced considerably. This practical guide is a revised and much expanded second edition, which will be a valuable tool for environmental practitioners. Written by experts in the field, it provides coverage of: sediment sampling; sample preparation; chemical analysis; ecotoxicology; bioaccumulation; biomarkers; and ecological assessment. In addition, detailed appendices describe protocols for many of the tests to be used.
Download or read book Analysis of Cosmetic Products written by Amparo Salvador and published by Elsevier. This book was released on 2017-11-20 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Cosmetic Products, Second Edition advises the reader from an analytical chemistry perspective on the choice of suitable analytical methods for production monitoring and quality control of cosmetic products. This book helps professionals working in the cosmetic industry or in research laboratories select appropriate analytical procedures for production, maintain in-market quality control of cosmetic products and plan for the appropriate types of biomedical and environmental testing. This updated and expanded second edition covers fundamental concepts relating to cosmetic products, current global legislation, the latest analytical methods for monitoring and quality control, characterization of nanomaterials and other new active ingredients, and an introduction to green cosmetic chemistry. - Provides comprehensive coverage of the specific analytical procedures for different analytes and cosmetic samples - Includes information on the biomonitoring of cosmetic ingredients in the human body and the environment - Describes the most recent developments in global legislation governing the cosmetics industry - Introduces green technologies and the use of nanomaterials in the development and analysis of cosmetic ingredients
Download or read book Surface Analysis Methods in Materials Science written by D.J. O'Connor and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallurgy, materials science and materials engineering; - postgraduate students undertaking research that involves the use of analytical techniques; - groups of scientists and engineers attending training courses and workshops on the application of surface analytical techniques in materials science; - industrial scientists and engineers in research and development seeking a description of available surface analytical techniques and guidance on the most appropriate techniques for particular applications. The contributors mostly come from Australia, with the notable exception of Ray Browning from Stanford University.
Download or read book Trace Analysis By Mass Spectrometry written by Arthur J. Ahearn and published by Elsevier. This book was released on 2012-12-02 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trace Analysis by Mass Spectrometry deals with trace analysis of solids and liquids by mass spectrometric techniques. Topics include the physics and techniques of electrical discharge ion sources, transmission of ions through double focusing mass spectrometers, and detection and measurement of ions by ion-sensitive plates. The ion sources used are principally electrical discharge type sources. This book is comprised of 14 chapters. The first several chapters focus on the basic physics of electrical discharge ion sources, double focusing mass spectrometry, and the measurement of arrays of mass resolved ion beams by electrical detection methods and with ion sensitive emulsions. The discussion then shifts to the problem of obtaining the chemical composition of the recorded mass resolved ion sample and relating this composition to that of the original sample. The chapters that follow describe specific techniques for analyzing special samples such as insulators, powders, microsamples, biological materials, reactive and low melting point substances, radioactive materials, and gases in solids. The remaining chapters include the use of laser ion sources in the analysis of solids and the analysis of surfaces particularly with sputter ion sources. This book will be of interest to students and practitioners of physics and chemistry.
Download or read book Palladium Emissions in the Environment written by Fathi Zereini and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents research results related to various aspects of palladium emissions in the environment, as well as an assessment of their effects on the environment and health. This book focuses on the following topics: analytical methods; sources of palladium emissions; occurrence, chemical behaviour and fate in the environment; and more.
Download or read book Extraction of Organic Analytes from Foods written by Ron Self and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a laboratory manual of methods used for the preparation and extraction of organic chemical compounds from food sources. It offers ideas on how to facilitate progress towards the total automation of the assay, as well as proposing assays for unknowns by comparison with known methods. Beginning with an introduction to extraction methodology, Extraction of Organic Analytes from Foods then progresses through sample preparation, extraction techniques (partition, solvation, distillation, adsorption and diffusion) and applications. Subject indices for the applications are organised by commodity, method, chemical class and analyte, and provide useful examples of references from the literature to illustrate historical development of the techniques. Examples of methods that have been compared, combined or used in collaborative trials have been correlated and used to form the beginnings of a database that can be expanded and updated to provide a laboratory reference source. Logically structured and with numerous examples, Extraction of Organic Analytes from Foods will be invaluable to practising food analysts as both a reference and training guide. In addition, the introductory sections in each chapter have been written with food science and technology students in mind, making this an important title for academic libraries.
Download or read book Fundamentals of Forensic DNA Typing written by John M. Butler and published by Academic Press. This book was released on 2009-09-30 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Forensic DNA Typing is written with a broad viewpoint. It examines the methods of current forensic DNA typing, focusing on short tandem repeats (STRs). It encompasses current forensic DNA analysis methods, as well as biology, technology and genetic interpretation. This book reviews the methods of forensic DNA testing used in the first two decades since early 1980's, and it offers perspectives on future trends in this field, including new genetic markers and new technologies. Furthermore, it explains the process of DNA testing from collection of samples through DNA extraction, DNA quantitation, DNA amplification, and statistical interpretation. The book also discusses DNA databases, which play an important role in law enforcement investigations. In addition, there is a discussion about ethical concerns in retaining DNA profiles and the issues involved when people use a database to search for close relatives. Students of forensic DNA analysis, forensic scientists, and members of the law enforcement and legal professions who want to know more about STR typing will find this book invaluable. - Includes a glossary with over 400 terms for quick reference of unfamiliar terms as well as an acronym guide to decipher the DNA dialect - Continues in the style of Forensic DNA Typing, 2e, with high-profile cases addressed in D.N.A.Boxes-- "Data, Notes & Applications" sections throughout - Ancillaries include: instructor manual Web site, with tailored set of 1000+ PowerPoint slides (including figures), links to online training websites and a test bank with key
Download or read book Clinical Molecular Diagnostics written by Shiyang Pan and published by Springer Nature. This book was released on 2021-07-08 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the discovery of molecular biomarkers, the development of laboratory testing techniques and their clinical applications, focusing on basic research to clinical practice. It introduces new and crucial knowledge and ethics of clinical molecular diagnosis. This book emphasizes the applications of clinical molecular diagnostic test on health management, especially from different diseased organs. It lets readers to understand and realize precision healthcare.
Download or read book Annual Report 2016 Institute for Nuclear Waste Disposal KIT Scientific Reports 7743 written by Geckeis, Horst and published by KIT Scientific Publishing. This book was released on 2017-12-15 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strontium Isotope Geology written by G. Faure and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the end of World War II isotope geology has grown into a diversi fied and complex discipline in the earth sciences. It has progressed by the efforts of a relatively small number of specialists, many of whom are physi cists, chemists, or mathematicians who were attracted to the earth sciences by the opportunity to measure and to interpret the isotopic compositions of certain chemical elements in geological materials. The phenomenal growth of isotope geology during the last 25 years is an impressive indi cation of the success of their efforts. We have now entered into a new phase of development of isotope geology which emphasizes the application of the new tools to the solution of specific problems in the earth and planetary sciences. This requires the active participation of a new breed of geologists who understand the nature and complexity of geological problems and can work toward their solution by a thoughtful application of the principles of isotope geology. It is there fore necessary to explain these principles to earth scientists at large to enable them to make use of the new information which isotope geology can offer them.
