Download or read book Rheology of Complex Fluids written by Abhijit P. Deshpande and published by Springer Science & Business Media. This book was released on 2010-09-20 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the School on Rheology of Complex fluids is to bring together young researchers and teachers from educational and R&D institutions, and expose them to the basic concepts and research techniques used in the study of rheological behavior of complex fluids. The lectures will be delivered by well-recognized experts. The book contents will be based on the lecture notes of the school.

Download or read book Computational Rheology written by Robert G. Owens and published by World Scientific Publishing Company. This book was released on 2002 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work traces the development of numerical methods for non-Newtonian flows from the late 1960s to 2001. It begins with broad coverage of non-Newtonian fluids, including their mathematical modelling and analysis, and then specific computational techniques are discussed.

Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids

Download or read book Theory Determination and Control of Physical Properties of Food Materials written by Cho-Kyun Rha and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the importance of material science, or the understanding of the physical properties of food materials in the progress of food engineering, has become more recognized. Increasing numbers of basic and applied studies in this area appear in numerous journals and literature scattered around various disciplines. This 'Series in Food Material Science' is planned to survey, collect, organize, review and evaluate these studies. By doing so, it is hoped that this series will be instrumental in bringing about a better understanding of the physical properties of food materials, better communication among scientists, and rapid progress in food engineering, science and technology. This volume, Theory, Determination and Control of Physical Properties of Food Materia/s, Volume I of the 'Series in Food Material Science', contains basic principles, methods and instrumental methods for determination and application of the modifi cation of physical properties. In this book, noted investigators in the subjects have pooled their knowledge and made it available in a condensed form. Every chapter is selfcontained with most of them starting with a review or introduction, including the viewpoint of the author. These should offer a beginner a very general introduction to the subjects covered, make the scientists and technologists in the field aware of current progress and allow the specialists a chance to compare different viewpoints.

Download or read book Program and abstracts book written by and published by . This book was released on 2001 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aulton s Pharmaceutics written by Michael E. Aulton and published by Elsevier Health Sciences. This book was released on 2013 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Pharmaceutics is the art of pharmaceutical preparations. It encompasses design of drugs, their manufacture and the elimination of micro-organisms from the products. This book encompasses all of these areas."--Provided by publisher.

Download or read book Emulsions Foams and Suspensions written by Laurier L. Schramm and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now colloid science books have either been theoretical, or focused on specific types of dispersion, or on specific applications. This then is the first book to provide an integrated introduction to the nature, formation and occurrence, stability, propagation, and uses of the most common types of colloidal dispersion in the process-related industries. The primary focus is on the applications of the principles, paying attention to practical processes and problems. This is done both as part of the treatment of the fundamentals, where appropriate, and also in the separate sections devoted to specific kinds of industries. Throughout, the treatment is integrated, with the principles of colloid and interface science common to each dispersion type presented for each major physical property class, followed by separate treatments of features unique to emulsions, foams, or suspensions. The first half of the book introduces the fundamental principles, introducing readers to suspension formation and stability, characterization, and flow properties, emphasizing practical aspects throughout. The following chapters discuss a wide range of industrial applications and examples, serving to emphasize the different methodologies that have been successfully applied. Overall, the book shows how to approach making emulsions, foams, and suspensions with different useful properties, how to propagate them, and how to prevent their formation or destabilize them if necessary. The author assumes no prior knowledge of colloid chemistry and, with its glossary of key terms, complete cross-referencing and indexing, this is a must-have for graduate and professional scientists and engineers who may encounter or use emulsions, foams, or suspensions, or combinations thereof, whether in process design, industrial production, or in related R&D fields.

Download or read book Engineering Properties of Foods written by M.A. Rao and published by CRC Press. This book was released on 2014-10-31 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years have passed since this reference's last edition - making Engineering Properties of Foods, Third Edition the must-have resource for those interested in food properties and their variations. Defined are food properties and the necessary theoretical background for each. Also evaluated is the usefulness of each property i

Download or read book Handbook of Formulating Dermal Applications written by Nava Dayan and published by John Wiley & Sons. This book was released on 2016-12-07 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conceptualization and formulation of skin care products intended for topical use is a multifaceted and evolving area of science. Formulators must account for myriad skin types, emerging opportunities for product development as well as a very temperamental retail market. Originally published as "Apply Topically" in 2013 (now out of print), this reissued detailed and comprehensive handbook offers a practical approach to the formulation chemist's day-to-day endeavors by: Addressing the innumerable challenges facing the chemist both in design and at the bench, such as formulating with/for specific properties; formulation, processing and production techniques; sensory and elegancy; stability and preservation; color cosmetics; sunscreens; Offering valuable guidance to troubleshooting issues regarding ingredient selection and interaction, regulatory concerns that must be addressed early in development, and the extrapolation of preservative systems, fragrances, stability and texture aids; Exploring the advantages and limitations of raw materials; Addressing scale-up and pilot production process and concerns; Testing and Measurements Methods. The 22 chapters written by industry experts such as Roger L. McMullen, Paul Thau, Hemi Nae, Ada Polla, Howard Epstein, Joseph Albanese, Mark Chandler, Steve Herman, Gary Kelm, Patricia Aikens, and Sam Shefer, along with many others, give the reader and user the ultimate handbook on topical product development.

Download or read book Techniques in Rheological Measurement written by A.A. Collyer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an earlier book, Rheological Measurement (A. A. Collyer & D. W. Clegg, Elsevier Applied Science, 1988), the basic rheological methods of measurement presently used were discussed in the light of the basic underlying principles and current theories. The same approach is adopted in this companion book, which is concerned with some newer or more sophisticated techniques that have resulted from a fresh understanding of the subject, or as a result of improvement in computer control, data acquisition and computational power, or more simply from an industrial need, particularly with regard to process control. The first two chapters deal with the extensional flow properties of fluids and their measurement. This inclusion is in response to a greater awareness in industry of the importance of these flows. Chapter 3 intro duces and develops the subject of surface rheology and the measurement of its properties, again a subject of increasing significance. The methods of measurement of the dynamic mechanical properties of fluids and the calculation of the resulting rheological parameters are discussed in Chap ters 4-7 inclusive. The subject areas covered are: large-amplitude oscilla tory shear, a model for viscoelastic fluids and solids, a new method of measuring dynamic mechanical properties, particularly for curing sys tems, and the use of complex waveforms in dynamic mechanical analysis.

Download or read book Biological Activities and Application of Marine Polysaccharides written by Emad Shalaby and published by BoD – Books on Demand. This book was released on 2017-01-11 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marine organisms have been under research for the last decades as a source for different active compounds with various biological activities and application in agriculture, pharmacy, medicine, environment, and industries. Marine polysaccharides from these active compounds are used as antibacterial, antiviral, antioxidant, anti-inflammation, bioremediations, etc. During the last three decades, several important factors that control the production of phytoplankton polysaccharides have been identified such as chemical concentrations, temperature, light, etc. The current book includes 14 chapters contributed by experts around the world; the chapters are categorized into three sections: Marine Polysaccharides and Agriculture, Marine Polysaccharides and Biological Activities, and Marine Polysaccharides and Industries.

Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.

Download or read book Theory and Applications of Colloidal Suspension Rheology written by Norman J. Wagner and published by Cambridge University Press. This book was released on 2021-04-15 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential text on the practical application and theory of colloidal suspension rheology, written by an international coalition of experts.

Download or read book Flow Past Highly Compliant Boundaries and in Collapsible Tubes written by Peter W. Carpenter and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Flow in Collapsible Tubes and Past Other Highly Compliant Boundaries was held on 26-30 March, 2001, at the University of Warwick. As this was the first scientific meeting of its kind we considered it important to mark the occasion by producing a book. Accordingly, at the end of the Symposium the Scientific Committee met to discuss the most appropriate format for the book. We wished to avoid the format of the conventional conference book consisting of a large number of short articles of varying quality. It was agreed that instead we should produce a limited number of rigorously refereed and edited articles by selected participants who would aim to sum up the state of the art in their particular research area. The outcome is the present book. Peter W. Ca rpenter, Warwick Timothy J. Pedley, Cambridge May, 2002. VB SCIENTIFIC COMMITTEE Co-Chair: P.W. Carpenter, Engineering, Warwiek, UK Co-Chair: TJ. Pedley, DAMTP, Cambridge, UK V.V. Babenko, Hydromechanics, Kiev, Ukraine R. Bannasch, Bionik & Evolutionstechnik, TU Berlin, Germany C.D. Bertram, Biomedical Engineering, New South Wales, Australia M. Gad-el-Hak, Aerospace & Mechanical Engineering, Notre Dame, USA J.B. Grotberg, Biomedical Engineering, Michigan, USA. R.D. Kamm, Mechanical Engineering, MIT, USA Y. Matsuzaki, Aerospace Engineering, N agoya, Japan P.K. Sen, Applied Mechanics, IIT Delhi, India L. van Wijngaarden, Twente, Netherlands K-S. Yeo, Mechanical Engineering, NU Singapore.

Download or read book Food Polysaccharides and Their Applications written by Alistair M. Stephen and published by CRC Press. This book was released on 2016-04-19 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive in scope, Food Polysaccharides and Their Applications, Second Edition explains the production aspects and the chemical and physical properties of the main classes of polysaccharaides consumed as food, highlighting their nutritional value and their technological characteristics. Chapters in this new edition detail the source,

Download or read book Fundamentals of Food Process Engineering written by Romeo T. Toledo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten years after the publication of the first edition of Fundamentals of Food Process Engineering, there have been significant changes in both food science education and the food industry itself. Students now in the food science curric ulum are generally better prepared mathematically than their counterparts two decades ago. The food science curriculum in most schools in the United States has split into science and business options, with students in the science option following the Institute of Food Technologists' minimum requirements. The minimum requirements include the food engineering course, thus students en rolled in food engineering are generally better than average, and can be chal lenged with more rigor in the course material. The food industry itself has changed. Traditionally, the food industry has been primarily involved in the canning and freezing of agricultural commodi ties, and a company's operations generally remain within a single commodity. Now, the industry is becoming more diversified, with many companies involved in operations involving more than one type of commodity. A number of for mulated food products are now made where the commodity connection becomes obscure. The ability to solve problems is a valued asset in a technologist, and often, solving problems involves nothing more than applying principles learned in other areas to the problem at hand. A principle that may have been commonly used with one commodity may also be applied to another commodity to produce unique products.

Download or read book Emerging Dairy Processing Technologies written by Nivedita Datta and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid milk processing is energy intensive, with high financial and energy costs found all along the production line and supply chain. Worldwide, the dairy industry has set a goal of reducing GHG emissions and other environmental impacts associated with milk processing. Although the major GHG emissions associated with milk production occur on the farm, most energy usage associated with milk processing occurs at the milk processing plant and afterwards, during refrigerated storage (a key requirement for the transportation, retail and consumption of most milk products). Sustainable alternatives and designs for the dairy processing plants of the future are now being actively sought by the global dairy industry, as it seeks to improve efficiency, reduce costs, and comply with its corporate social responsibilities. Emerging Dairy Processing Technologies: Opportunities for the Dairy Industry presents the state of the art research and technologies that have been proposed as sustainable replacements for high temperature-short time (HTST) and ultra-high temperature (UHT) pasteurization, with potentially lower energy usage and greenhouse gas emissions. These technologies include pulsed electric fields, high hydrostatic pressure, high pressure homogenization, ohmic and microwave heating, microfiltration, pulsed light, UV light processing, and carbon dioxide processing. The use of bacteriocins, which have the potential to improve the efficiency of the processing technologies, is discussed, and information on organic and pasture milk, which consumers perceive as sustainable alternatives to conventional milk, is also provided. This book brings together all the available information on alternative milk processing techniques and their impact on the physical and functional properties of milk, written by researchers who have developed a body of work in each of the technologies. This book is aimed at dairy scientists and technologists who may be working in dairy companies or academia. It will also be highly relevant to food processing experts working with dairy ingredients, as well as university departments, research centres and graduate students.