Download or read book Predistortion and Receiver Techniques for a MC CDMA System Over Nonlinear AWGN Channel written by Rekha Sundararajan and published by . This book was released on 2003 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frequency Domain Multiuser Detection for CDMA Systems written by Paulo Silva and published by CRC Press. This book was released on 2022-09-01 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Future broadband wireless communication systems are expected to be able to offer new and powerful services enabling fast transmission rates of several tens of Mbit/s. This is an ambitious challenge especially for mobile communication systems since these systems should be able to cope with severely time dispersive channels, associated to the signal multipath propagation. Moreover, these systems should have high spectral and power efficiencies, as well as high capacity and flexibility. Spread spectrum techniques, particularly coded division multiple access (CDMA) techniques allow high capacity and flexibility, continuous transmission requiring low-peak power requirements for the amplifiers, as well as some robustness against fading and time-dispersion effects associated with the multipath propagation. When employed in prefix assisted (PA) block transmission schemes combined with frequency-domain receiver implementations they become especially interesting for broadband wireless systems. In Frequency-Domain Multiuser Detection for CDMA Systems the use of PA block transmission is considered in the context of both DS (Direct Sequence) and MC (Multicarrier) CDMA schemes. The main goal is the study of frequency-domain multiuser detection techniques with iterative signal detection/decoding techniques, also in combination with estimation and cancelation of nonlinear distortion effects. The receiver structures are suitable to scenarios with high interference levels and strongly time-dispersive channels.
Download or read book OFDM and MC CDMA written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. Currently, a technical in-depth book on this subject is unavailable, which has a similar detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink By providing an all-encompassing self-contained treatment this volume will appeal to a wide readership, as it is both an easy-reading textbook and a high-level research monograph.
Download or read book OFDM and MC CDMA for Broadband Multi User Communications WLANs and Broadcasting written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2005-01-28 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal frequency-division multiplexing (OFDM) is a method of digital modulation in which a signal is split into several narrowband channels at different frequencies. CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimising the use of available bandwidth. Multiplexing is sending multiple signals or streams of information on a carrier at the same time in the form of a single, complex signal and then recovering the separate signals at the receiving end. Multi-Carrier (MC) CDMA is a combined technique of Direct Sequence (DS) CDMA (Code Division Multiple Access) and OFDM techniques. It applies spreading sequences in the frequency domain. Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. This technical in-depth book is unique in its detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink Portrays the entire body of knowledge currently available on OFDM Provides the first complete treatment of OFDM, MIMO(Multiple Input Multiple Output)-OFDM and MC-CDMA Considers the benefits of channel coding and space time coding in the context of various application examples and features numerous complete system design examples Converts the lessons of Shannon’s information theory into design principles applicable to practical wireless systems Combines the benefits of a textbook with a research monograph where the depth of discussions progressively increase throughout the book This all-encompassing self-contained treatment will appeal to researchers, postgraduate students and academics, practising research and development engineers working for wireless communications and computer networking companies and senior undergraduate students and technical managers.
Download or read book Multi Carrier and Spread Spectrum Systems written by K. Fazel and published by John Wiley & Sons. This book was released on 2004-02-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frequency spectrum is a limited and valuable resource for wireless communications. A good example can be observed among network operators in Europe for the prices to pay for UMTS-frequency bands. Therefore, the first goal when designing future wireless communication systems (e.g. 4G - fourth generation) has to be the increase in spectral efficiency. The development in digital communications in the past years has enabled efficient modulation and coding techniques for robust and spectral efficient data, speech, audio and video transmission. These are the multi-carrier modulation (e.g. OFDM) and the spread spectrum technique (e.g. DS-CDMA), where OFDM was chosen for broadcast applications (DVB, DAB) as well as for broadband wireless indoor standards (ETSI HIPERLAN-II, IEEE-802.11) and the DS-CDMA was selected in mobile communications (IS-95, third generation mobile radio systems world wide, UMTS/IMT 2000). Since 1993 various combinations of multi-carrier (MC) modulation and the spread spectrum (SS) technique have been introduced and the field of MC-SS communications has become an independent and important research topic with increasing activities. New application fields have been proposed such as high rate cellular mobile, high rate wireless indoor and LMDS. It has been shown that MC-SS offers the high spectral efficiency, robustness and flexibility that is required for the next generation systems. Meanwhile, different alternative hybrid schemes such as OFDM/OFDMA, MC-TDMA, etc. have been deeply analysed and adopted in different international standards (ETSI-BRAN, IEEE-802 & MMAC). Multi-Carrier & Spread-Spectrum: Analysis of Hybrid Air Interfaces draws together all of the above mentioned hybrid schemes therefore providing a greatly needed resource for system engineers, telecommunication designers and researchers in order to enable them to develop, build and deploy several schemes based on MC-transmission for the next generation systems (which will be an integration of broadband multimedia services covering both 4G mobile and fixed wireless systems). * Offers a complete treatment of multi-carrier, spread-spectrum (SS) and time division multiplexing (TDM) techniques * Provides an in-depth insight into hybrid multiple access techniques based on multi-carrier (MC) transmission * Presents numerous hybrid multiple access and air interface architectures including OFDM/CDMA, MC-CDMA, MC-DS-CDMA and MT-CDMA * Covers new techniques such as space-time coding and software radio Telecommunications engineers, hardware & software system designers and researchers as well as students, lecturers and technicians will all find this an invaluable addition to their bookshelf.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1998 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Inverse system identification with applications in predistortion written by Ylva Jung and published by Linköping University Electronic Press. This book was released on 2018-12-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models are commonly used to simulate events and processes, and can be constructed from measured data using system identification. The common way is to model the system from input to output, but in this thesis we want to obtain the inverse of the system. Power amplifiers (PAs) used in communication devices can be nonlinear, and this causes interference in adjacent transmitting channels. A prefilter, called predistorter, can be used to invert the effects of the PA, such that the combination of predistorter and PA reconstructs an amplified version of the input signal. In this thesis, the predistortion problem has been investigated for outphasing power amplifiers, where the input signal is decomposed into two branches that are amplified separately by highly efficient nonlinear amplifiers and then recombined. We have formulated a model structure describing the imperfections in an outphasing abbrPA and the matching ideal predistorter. The predistorter can be estimated from measured data in different ways. Here, the initially nonconvex optimization problem has been developed into a convex problem. The predistorters have been evaluated in measurements. The goal with the inverse models in this thesis is to use them in cascade with the systems to reconstruct the original input. It is shown that the problems of identifying a model of a preinverse and a postinverse are fundamentally different. It turns out that the true inverse is not necessarily the best one when noise is present, and that other models and structures can lead to better inversion results. To construct a predistorter (for a PA, for example), a model of the inverse is used, and different methods can be used for the estimation. One common method is to estimate a postinverse, and then using it as a preinverse, making it straightforward to try out different model structures. Another is to construct a model of the system and then use it to estimate a preinverse in a second step. This method identifies the inverse in the setup it will be used, but leads to a complicated optimization problem. A third option is to model the forward system and then invert it. This method can be understood using standard identification theory in contrast to the ones above, but the model is tuned for the forward system, not the inverse. Models obtained using the various methods capture different properties of the system, and a more detailed analysis of the methods is presented for linear time-invariant systems and linear approximations of block-oriented systems. The theory is also illustrated in examples. When a preinverse is used, the input to the system will be changed, and typically the input data will be different than the original input. This is why the estimation of preinverses is more complicated than for postinverses, and one set of experimental data is not enough. Here, we have shown that identifying a preinverse in series with the system in repeated experiments can improve the inversion performance.
Download or read book Bit Interleaved Coded Modulation written by Albert Guillén i Fàbregas and published by Now Publishers Inc. This book was released on 2008 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bit-Interleaved Coded Modulation is a comprehensive study of the subject, providing a comprehensive review of one of the most important coding schemes in modern communication systems.
Download or read book Signal Processing for Mobile Communications Handbook written by Mohamed Ibnkahla and published by CRC Press. This book was released on 2004-08-16 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, a wealth of research has emerged addressing various aspects of mobile communications signal processing. New applications and services are continually arising, and future mobile communications offer new opportunities and exciting challenges for signal processing. The Signal Processing for Mobile Communications Handbook provi
Download or read book Broadband Wireless Communications written by Marco Luise and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broadband Wireless Access is a highly challenging and fast changing area of multimedia radio communications. These papers on the subject are the proceedings of the 9th Tyrrhenian Workshop, held in Lerici, Italy, September 1997. They provide a prospect on the state of the art and future development, with a sufficiently wide focus to cover technological, architectural and regulatory issues. Emphasis is given to those advances of digital signal processing techniques, microwave mono lithic integrated circuits and smart antennae that will allow the design of low cost user terminals with advanced capabilities. Specific attention is also devoted to the protocols these new terminals will use to access the radio medium, and to the kind of services that will eventually be provided to the end-user in the future. With contributions from worldwide experts, the material presented here is a timely and high-level overview of the field, and as well as being informative is a useful tool for promoting further investigation into the area of multimedia radio communications.
Download or read book MIMO OFDM Wireless Communications with MATLAB written by Yong Soo Cho and published by John Wiley & Sons. This book was released on 2010-08-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM is a key technology for next-generation cellular communications (3GPP-LTE, Mobile WiMAX, IMT-Advanced) as well as wireless LAN (IEEE 802.11a, IEEE 802.11n), wireless PAN (MB-OFDM), and broadcasting (DAB, DVB, DMB). In MIMO-OFDM Wireless Communications with MATLAB®, the authors provide a comprehensive introduction to the theory and practice of wireless channel modeling, OFDM, and MIMO, using MATLAB® programs to simulate the various techniques on MIMO-OFDM systems. One of the only books in the area dedicated to explaining simulation aspects Covers implementation to help cement the key concepts Uses materials that have been classroom-tested in numerous universities Provides the analytic solutions and practical examples with downloadable MATLAB® codes Simulation examples based on actual industry and research projects Presentation slides with key equations and figures for instructor use MIMO-OFDM Wireless Communications with MATLAB® is a key text for graduate students in wireless communications. Professionals and technicians in wireless communication fields, graduate students in signal processing, as well as senior undergraduates majoring in wireless communications will find this book a practical introduction to the MIMO-OFDM techniques. Instructor materials and MATLAB® code examples available for download at www.wiley.com/go/chomimo
Download or read book Adaptive Wireless Transceivers written by Lajos Hanzo and published by Wiley-IEEE Press. This book was released on 2002-04-03 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Wireless Transceivers provides the reader with a broad overview of near-instantaneously adaptive transceivers in the context of TDMA, CDMA and OFDM systems. The adaptive transceivers examined employ powerful turbo codecs, turbo equalisers and space-time codecs, equipping the reader with a future-proof technological road map. It demonstrates that adaptive transceivers are capable of mitigating the channel quality fluctuations of the wireless channel as a lower-complexity alternative to space-time coding. By contrast, if the higher complexity of multiple transmitters and multiple receiver-assisted systems is deemed acceptable, the advantages of adaptability erode. Provides an in-depth introduction to channel equalisers and Kalman filtering and discusses the associated complexity versus performance trade-offs Introduces wideband near-instantaneously adaptive transceivers and studies their performance both with and without turbo channel coding Describes how to optimise adaptive modulation mode switching and highlights a range of practical considerations Introduces neural network based channel equalisers and discusses Radial Basis Function (RBF) assisted equalisers embedded into adaptive modems supported by turbo channel coding and turbo channel equalisation Employs the above adaptive principles also in the context of CDMA and OFDM transceivers and discusses the pros and cons of space-time coding versus adaptive modulation Researchers, advanced students and practising development engineers working in wireless communications will all find this valuable text an informative read.
Download or read book RF System Design of Transceivers for Wireless Communications written by Qizheng Gu and published by Springer Science & Business Media. This book was released on 2006-05-03 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for RF Engineers and, in particular, those engineers focusing mostly on RF systems and RFIC design. The author develops systematic methods for RF systems design, complete with a comprehensive set of design formulas. Its focus on mobile station transmitter and receiver system design also applies to transceiver design of other wireless systems such as WLAN. This comprehensive reference work covers a wide range of topics from general principles of communication theory, as it applies to digital radio designs to specific examples on implementing multimode mobile systems.
Download or read book Multi Carrier Spread Spectrum written by Khaled Fazel and published by Springer Science & Business Media. This book was released on 2006-02-23 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The benefits and success of multi-carrier (MC) modulation on one side and the flexibility offered by the spread spectrum (SS) technique on the other side have motivated many researchers to investigate the combination of both techniques since 1993. This combination known as multi-carrier spread spectrum (MC-SS) benefits from the advantages of both systems and offers high flexibility, high spectral efficiency, simple detection strategies, narrow-band interference rejection capability, etc. The basic principle of this combination is straightforward: The spreading is performed as direct sequence spread spectrum (DS-SS) but instead of transmitting the chips over a single carrier, several sub-carriers are employed. The MC modulation and demodulation can easily be realized in the digital domain by performing IFFT and FFT operations. The separation of the users’ signals can be performed in the code domain. MC-SS systems can perform the spreading in frequency direction, which allows for simple signal detection strategies. Since 1993, MC-SS has been deeply studied and new alternative solutions have been proposed. Meanwhile, deep system analysis and comparison with DS-CDMA have been performed that show the superiority of MC-CDMA. The aim of Multi-Carrier Spread-Spectrum is to edit the ensemble of the newest contributions and research results in this new field that have been presented during the 5th International Workshop on Multi-Carrier Spread-Spectrum (MC-SS 2005), held in Oberpfaffenhofen, Germany.
Download or read book 4G LTE LTE Advanced for Mobile Broadband written by Erik Dahlman and published by Academic Press. This book was released on 2013-10-07 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on LTE with full updates including LTE-Advanced (Release-11) to provide a complete picture of the LTE system. Detailed explanations are given for the latest LTE standards for radio interface architecture, the physical layer, access procedures, broadcast, relaying, spectrum and RF characteristics, and system performance. Key technologies presented include multi-carrier transmission, advanced single-carrier transmission, advanced receivers, OFDM, MIMO and adaptive antenna solutions, radio resource management and protocols, and different radio network architectures. Their role and use in the context of mobile broadband access in general is explained, giving both a high-level overview and more detailed step-by-step explanations. This book is a must-have resource for engineers and other professionals in the telecommunications industry, working with cellular or wireless broadband technologies, giving an understanding of how to utilize the new technology in order to stay ahead of the competition. New to this edition: In-depth description of CoMP and enhanced multi-antenna transmission including new reference-signal structures and feedback mechanisms Detailed description of the support for heterogeneous deployments provided by the latest 3GPP release Detailed description of new enhanced downlink control-channel structure (EPDDCH) New RF configurations including operation in non-contiguous spectrum, multi-bands base stations and new frequency bands Overview of 5G as a set of well-integrated radio-access technologies, including support for higher frequency bands and flexible spectrum management, massive antenna configurations, and ultra-dense deployments Covers a complete update to the latest 3GPP Release-11 Two new chapters on HetNet, covering small cells/heterogeneous deployments, and CoMP, including Inter-site coordination Overview of current status of LTE release 12 including further enhancements of local-area, CoMP and multi-antenna transmission, Machine-type-communication, Device-to-device communication
Download or read book Fundamentals of WiMAX written by Jeffrey G. Andrews and published by Pearson Education. This book was released on 2007-02-27 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Guide to WiMAX Technology WiMAX is the most promising new technology for broadband wireless access to IP services. It can serve an extraordinary range of applications and environments: data, voice, and multimedia; fixed and mobile; licensed and unlicensed. However, until now, wireless professionals have had little reliable information to guide them. Fundamentals of WiMAX is the first comprehensive guide to WiMAX—its technical foundations, features, and performance. Three leading wireless experts systematically cut through the hype surrounding WiMAX and illuminate the realities. They combine complete information for wireless professionals and basic, accessible knowledge for non-experts. Professionals will especially appreciate their detailed discussion of the performance of WiMAX based on comprehensive link- and system-level simulations. Whether you're a wireless engineer, network architect, manager, or system designer, this book delivers essential information for succeeding with WiMAX—from planning through deployment. Topics include Applications, history, spectrum options, technical and business challenges, and competitive technologies of WiMAX 802.16 standards: physical and MAC layers, channel access, scheduling services, mobility, advanced antenna features, hybrid-ARQ, and more Broadband wireless channels: pathloss, shadowing, cellular systems, sectoring, and fading—including modeling and mitigation OFDM: from basic multicarrier concepts to synchronization, PAR reduction, and clipping MIMO: Multiple antennas, spatial diversity, beamforming, and a cutting-edge treatment of the use of MIMO in WiMAX OFDMA: multiple access, multiuser diversity, adaptive modulation, and resource allocation Networking and services aspects: architecture and protocols for IP QoS, session management, ecurity, and mobility management Predicting performance using link-level and system-level simulations WiMAX network architecture: design principles, reference models, authentication, QoS, and mobility management
Download or read book RF Analog Impairments Modeling for Communication Systems Simulation written by Lydi Smaini and published by John Wiley & Sons. This book was released on 2012-09-04 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the growing complexity of personal mobile communication systems demanding higher data-rates and high levels of integration using low-cost CMOS technology, overall system performance has become more sensitive to RF analog front-end impairments. Designing integrated transceivers requires a thorough understanding of the whole transceiver chain including RF analog front-end and digital baseband. Communication system engineers have to include RF analog imperfections in their simulation benches in order to study and quantify their impact on the system performance. Here the author explores key RF analog impairments in a transceiver and demonstrates how to model their impact from a communication system design view-point. He discusses the design aspects of the front end of transceivers (both receivers and transmitters) and provides the reader with a way to optimize a complex mixed-signal platform by taking into account the characteristics of the RF/analog front-end. Key features of this book include: Practical examples illustrated by system simulation results based on WiFi and mobile WiMAX OFDM transceivers An overview of the digital estimation and compensation of the RF analog impairments such as power amplifier distortion, quadrature imbalance, and carrier and sampling frequency offsets An exposition of the challenges involved in the design of both RF analog circuits and DSP communication circuits in deep submicron CMOS technology MATLAB® codes for RF analog impairments models hosted on the companion website Uniquely the book bridges the gap between RFIC design specification needs and communication systems simulation, offering readers RF analog impairments modeling knowledge and a comprehensive approach to unifying theory and practice in system modelling. It is of great value to communication systems and DSP engineers and graduate students who design communication processing engines, RF/analog systems and IC design engineers involved in the design of communication platforms.
