Download or read book Practical Design and Application of Model Predictive Control written by Nassim Khaled and published by Butterworth-Heinemann. This book was released on 2018-05-04 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Design and Application of Model Predictive Control is a self-learning resource on how to design, tune and deploy an MPC using MATLAB® and Simulink®. This reference is one of the most detailed publications on how to design and tune MPC controllers. Examples presented range from double-Mass spring system, ship heading and speed control, robustness analysis through Monte-Carlo simulations, photovoltaic optimal control, and energy management of power-split and air-handling control. Readers will also learn how to embed the designed MPC controller in a real-time platform such as Arduino®. The selected problems are nonlinear and challenging, and thus serve as an excellent experimental, dynamic system to show the reader the capability of MPC. The step-by-step solutions of the problems are thoroughly documented to allow the reader to easily replicate the results. Furthermore, the MATLAB® and Simulink® codes for the solutions are available for free download. Readers can connect with the authors through the dedicated website which includes additional free resources at www.practicalmpc.com. Illustrates how to design, tune and deploy MPC for projects in a quick manner Demonstrates a variety of applications that are solved using MATLAB® and Simulink® Bridges the gap in providing a number of realistic problems with very hands-on training Provides MATLAB® and Simulink® code solutions. This includes nonlinear plant models that the reader can use for other projects and research work Presents application problems with solutions to help reinforce the information learned
Download or read book Model Predictive Control mit MATLAB und Simulink written by Rainer Dittmar and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modellbasierte prädiktive Regelungen dienen der Lösung anspruchsvoller Aufgaben der Mehrgrößenregelung mit Beschränkungen der Stell- und Regelgrößen. Sie werden in der Industrie in vielen Bereichen erfolgreich eingesetzt. Mit der MPC ToolboxTM des Programmsystems MATLAB®/Simulink® steht ein Werkzeug zur Verfügung, das sowohl in der industriellen Praxis als auch an Universitäten und Hochschulen verwendet wird. Das vorliegende Buch gibt eine Übersicht über die Grundideen und Anwendungsvorteile des MPC-Konzepts. Es zeigt, wie mit Hilfe der Toolbox MPC-Regelungen entworfen, eingestellt und simuliert werden können. Ausgewählte Beispiele aus dem Bereich der Verfahrenstechnik demonstrieren mögliche Vorgehensweisen und vertiefen das Verständnis. Das Buch richtet sich an in der Industrie tätige Ingenieure, die MPC-Regelungen planen, entwickeln und betreiben, aber auch an Studierende technischer Fachdisziplinen, die in das Arbeitsgebiet MPC einsteigen wollen. Model Predictive Control (MPC) is used to solve challenging multivariable-constrained control problems. MPC systems are successfully applied in many different branches of industry. The MPC ToolboxTM of MATLAB®/Simulink® provides powerful tools for industrial MPC application, but also for education and research at technical universities. This book gives an overview of the basic ideas and advantages of the MPC concept. It shows how MPC systems can be designed, tuned, and simulated using the MPC Toolbox. Selected process engineering benchmark examples are used to demonstrate typical design approaches and help deepen the understanding of MPC technologies. The book is aimed at engineers in industry interested in the development and application of MPC systems, as well as students of different technical disciplines seeking an introduction into this field.This book gives an overview of the basic ideas and advantages of the MPC concept. It shows how MPC systems can be designed, tuned, and simulated using the MPC Toolbox. Selected process engineering benchmark examples are used to demonstrate typical design approaches and help deepen the understanding of MPC technologies. The book is aimed at engineers in industry interested in the development and application of MPC systems, as well as students of different technical disciplines seeking an introduction into this field.
Download or read book Predictive Control With Matlab Designing and Simulating Models written by A. Taylor and published by Createspace Independent Publishing Platform. This book was released on 2017-11-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control Toolbox provides functions, an app, and Simulink blocks for designing and simulating model predictive controllers (MPCs). The toolbox lets you specify plant and disturbance models, horizons, constraints, and weights. By running closed-loop simulations, you can evaluate controller performance. You can adjust the behavior of the controller by varying its weights and constraints at run time. To control a nonlinear plant, you can implement adaptive and gain-scheduled MPCs. For applications with fast sample rates, you can generate an explicit model predictive controller from a regular controller or implement an approximate solution. For rapid prototyping and embedded system implementation, the toolbox supports automatic C-code and IEC 61131-3 Structured Text generation. The most important features that this Toolbox provides are the following: - Inroduction: Learn the basics of Model Predictive Control Toolbox - Plant Specification: Specify plant model, input and output signal types, scale factors - MPC Design: Basic workflow for designing traditional (implicit) model predictive controllers - Adaptive MPC Design: Adaptive control of nonlinear plant by updating internal plant model at run time - Explicit MPC Design: Fast model predictive control using precomputed solutions instead of run-time optimization - Gain-Scheduled MPC Design: Gain-scheduled control of nonlinear plants by switching controllers at run time - Case-Study Examples
Download or read book Nonlinear Model Predictive Control written by Frank Allgöwer and published by Birkhäuser. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past decade model predictive control (MPC), also referred to as receding horizon control or moving horizon control, has become the preferred control strategy for quite a number of industrial processes. There have been many significant advances in this area over the past years, one of the most important ones being its extension to nonlinear systems. This book gives an up-to-date assessment of the current state of the art in the new field of nonlinear model predictive control (NMPC). The main topic areas that appear to be of central importance for NMPC are covered, namely receding horizon control theory, modeling for NMPC, computational aspects of on-line optimization and application issues. The book consists of selected papers presented at the International Symposium on Nonlinear Model Predictive Control – Assessment and Future Directions, which took place from June 3 to 5, 1998, in Ascona, Switzerland. The book is geared towards researchers and practitioners in the area of control engineering and control theory. It is also suited for postgraduate students as the book contains several overview articles that give a tutorial introduction into the various aspects of nonlinear model predictive control, including systems theory, computations, modeling and applications.
Download or read book A First Course in Predictive Control written by J.A. Rossiter and published by CRC Press. This book was released on 2018-04-17 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a significant expansion in depth and breadth of the previous edition. It includes substantially more numerical illustrations and copious supporting MATLAB code that the reader can use to replicate illustrations or build his or her own. The code is deliberately written to be as simple as possible and easy to edit. The book is an excellent starting point for any researcher to gain a solid grounding in MPC concepts and algorithms before moving into application or more advanced research topics. Sample problems for readers are embedded throughout the chapters, and in-text questions are designed for readers to demonstrate an understanding of concepts through numerical simulation.
Download or read book Model Predictive Control System Design and Implementation Using MATLAB written by Liuping Wang and published by Springer Science & Business Media. This book was released on 2009-02-14 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control System Design and Implementation Using MATLAB® proposes methods for design and implementation of MPC systems using basis functions that confer the following advantages: - continuous- and discrete-time MPC problems solved in similar design frameworks; - a parsimonious parametric representation of the control trajectory gives rise to computationally efficient algorithms and better on-line performance; and - a more general discrete-time representation of MPC design that becomes identical to the traditional approach for an appropriate choice of parameters. After the theoretical presentation, coverage is given to three industrial applications. The subject of quadratic programming, often associated with the core optimization algorithms of MPC is also introduced and explained. The technical contents of this book is mainly based on advances in MPC using state-space models and basis functions. This volume includes numerous analytical examples and problems and MATLAB® programs and exercises.
Download or read book Matlab and Simulink written by Smith A. and published by Createspace Independent Publishing Platform. This book was released on 2016-11-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control Toolbox provides tools for systematically analyzing, designing, and tuning model predictive controllers. You can design and simulate model predictive controllers using functions in MATLAB or blocks in Simulink. You can set and modify the predictive model, control and prediction horizons, input and output constraints, and weights. The toolbox enables you to diagnose issues that could lead to run-time failures and provides advice on changing weights and constraints to improve performance and robustness. By running different scenarios in linear and nonlinear simulations, you can evaluate controller performance. You can adjust controller performance as it runs by tuning weights and varying constraints. For rapid prototyping and embedded system design, the toolbox supports C-code generation.
Download or read book PID and Predictive Control of Electrical Drives and Power Converters using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.
Download or read book Model Predictive Control Using MATLAB and SIMULINK written by Smith A. and published by . This book was released on 2016-11-23 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control Toolbox provides tools for systematically analyzing, designing, and tuning model predictive controllers. You can design and simulate model predictive controllers using functions in MATLAB or blocks in Simulink. You can set and modify the predictive model, control and prediction horizons, input and output constraints, and weights. The toolbox enables you to diagnose issues that could lead to run-time failures and provides advice on changing weights and constraints to improve performance and robustness. By running different scenarios in linear and nonlinear simulations, you can evaluate controller performance. You can adjust controller performance as it runs by tuning weights and varying constraints. For rapid prototyping and embedded system design, the toolbox supports C-code generation.
Download or read book Introduction to Model Predictive Control With Matlab written by A. Taylor and published by Createspace Independent Publishing Platform. This book was released on 2017-11-13 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control Toolbox provides functions, an app, and Simulink blocks for designing and simulating model predictive controllers (MPCs). The toolbox lets you specify plant and disturbance models, horizons, constraints, and weights. By running closed-loop simulations, you can evaluate controller performance. You can adjust the behavior of the controller by varying its weights and constraints at run time. To control a nonlinear plant, you can implement adaptive and gain-scheduled MPCs. For applications with fast sample rates, you can generate an explicit model predictive controller from a regular controller or implement an approximate solution. For rapid prototyping and embedded system implementation, the toolbox supports automatic C-code and Structured Text generation. The most important content that this book provides are the following: -MPC Modeling -Plant Model -Disturbance Model -Measurement Noise Model -Signal Types, Inputs and Outputs -Construct Linear Time Invariant (LTI) Models -Transfer Function Models -Zero/Pole/Gain Models -State-Space Models -LTI Object Properties -LTI Model Characteristics -Specify Multi-Input Multi-Output Plants -CSTR Model -Linearize Simulink Models -Linearization Using MATLAB Code -Linearization Using Linear Analysis Tool in Simulink Control Design -Linearize Simulink Models Using MPC Designer -Define MPC Structure By Linearization -Linearize Model -Specifying Operating Points -Connect Measured Disturbances for Linearization -Identify Plant from Data -Identify Plant from Data at the Command Line -Working with Impulse-Response Models -Design MPC Controller for Identified Plant Model -Design Controller for Identified Plant Using Apps -Design Controller for Identified Plant at the Command Line -Configure Noise Channels as Unmeasured Disturbances -Design Controller Using MPC Designer -Test Controller Robustness -Design MPC Controller for Plant with Delays -Design MPC Controller for Nonsquare Plant -Design MPC Controller at the Command Line -Simulate Controller with Nonlinear Plant -Nonlinear CSTR Application -Example Code for Successive Linearization -CSTR Results and Discussion -Compute Steady-State Gain -Extract Controller -Signal Previewing -Update Constraints at Run Time -Update Bounds on Input and Output Signals at Run Time -Update Custom Linear Constraints at Run Time -Tune Weights at Run Time -Designing and Testing Controllers in Simulink -Design MPC Controller in Simulink -Test an Existing Controller
Download or read book Process Dynamics and Control written by Brian Roffel and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a different approach to other textbooks in the area, this book is a comprehensive introduction to the subject divided in three broad parts. The first part deals with building physical models, the second part with developing empirical models and the final part discusses developing process control solutions. Theory is discussed where needed to ensure students have a full understanding of key techniques that are used to solve a modeling problem. Hallmark Features: Includes worked out examples of processes where the theory learned early on in the text can be applied. Uses MATLAB simulation examples of all processes and modeling techniques- further information on MATLAB can be obtained from www.mathworks.com Includes supplementary website to include further references, worked examples and figures from the book This book is structured and aimed at upper level undergraduate students within chemical engineering and other engineering disciplines looking for a comprehensive introduction to the subject. It is also of use to practitioners of process control where the integrated approach of physical and empirical modeling is particularly valuable.
Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.
Download or read book Model Predictive Control Mit MATLAB und Simulink written by Rainer Dittmar and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Predictive Control in the Process Industry written by Eduardo F. Camacho and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control is an important technique used in the process control industries. It has developed considerably in the last few years, because it is the most general way of posing the process control problem in the time domain. The Model Predictive Control formulation integrates optimal control, stochastic control, control of processes with dead time, multivariable control and future references. The finite control horizon makes it possible to handle constraints and non linear processes in general which are frequently found in industry. Focusing on implementation issues for Model Predictive Controllers in industry, it fills the gap between the empirical way practitioners use control algorithms and the sometimes abstractly formulated techniques developed by researchers. The text is firmly based on material from lectures given to senior undergraduate and graduate students and articles written by the authors.
Download or read book Model Predictive Control for Doubly Fed Induction Generators and Three Phase Power Converters written by Alfeu Sguarezi and published by Elsevier. This book was released on 2022-01-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control for Doubly-Fed Induction Generators and Three-Phase Power Converters describes the application of model predictive control techniques with modulator and finite control sets to squirrel cage induction motor and in doubly-fed induction generators using field orientation control techniques as both current control and direct power control. Sections discuss induction machines, their key modulation techniques, introduce the utility of model predictive control, review core concepts of vector control, direct torque control, and direct power control alongside novel approaches of MPC. Mathematical modeling of cited systems, MPC theory, their applications, MPC design and simulation in MATLAB are also considered in-depth. The work concludes by addressing implementation considerations, including generator operation under voltage sags or distorted voltage and inverters connected to the grid operating under distorted voltage. Experimental results are presented in full. Adopts model predictive control design for optimized induction machines geared for complex grid dynamics Demonstrates how to simulate model predictive control using MATLAB and Simulink Presents information about hardware implementation to obtain experimental results Covers generator operation under voltage sags or distorted voltage
Download or read book Model Predictive Control System Design and Implementation Using MATLAB written by Liuping Wang and published by Springer Science & Business Media. This book was released on 2009-03-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control System Design and Implementation Using MATLAB® proposes methods for design and implementation of MPC systems using basis functions that confer the following advantages: - continuous- and discrete-time MPC problems solved in similar design frameworks; - a parsimonious parametric representation of the control trajectory gives rise to computationally efficient algorithms and better on-line performance; and - a more general discrete-time representation of MPC design that becomes identical to the traditional approach for an appropriate choice of parameters. After the theoretical presentation, coverage is given to three industrial applications. The subject of quadratic programming, often associated with the core optimization algorithms of MPC is also introduced and explained. The technical contents of this book is mainly based on advances in MPC using state-space models and basis functions. This volume includes numerous analytical examples and problems and MATLAB® programs and exercises.
Download or read book Modeling Analysis and Design of Control Systems in MATLAB and Simulink written by Dingyü Xue and published by World Scientific Publishing Company. This book was released on 2014-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: MATLAB and Simulink are now being used extensively in not only academia as a teaching aid, a learning aid and a research tool but also industry for modeling, analysis, design and rapid prototyping. As a response, Modeling, Analysis and Design of Control Systems in MATLAB and Simulink emphasizes on practical use of and problem solving in MATLAB and Simulink following the so-called MAD (modeling, analysis and design) notion. Readers can not only learn the control concepts and problem solving methods but also coding skills by following the numerous inline MATLAB scripts, functions, reproducible examples as well as chapter-end Problems. The book service website contains Solution Manual, 1, 000 plus teaching/learning PPTs, and all related codes used in the book for reproducing the examples.Modeling, Analysis and Design of Control Systems in MATLAB and Simulink has 12 chapters organized in 5 parts: Foundation, Modeling, Analysis, Design and Rapid Prototyping. Each chapter ends with Problems section. This book can be used as a reference text in the introductory control course for undergraduates in all engineering schools. The coverage of topics is broad, yet balanced, and it should provide a solid foundation for the subsequent control engineering practice in both industry and research institutes. This book will be a good desktop reference for control engineers and many codes and tools in this book may be directly applicable in real world problem solving.